[PATCH v4 01/23] mfd: omap-usb-host: get rid of cpu_is_omap..() macros

[Roger Quadros]

Instead of using cpu_is_omap..() macros in the device driver we
rely on information provided in the platform data.

The only information we need is whether the USB Host module has
a single ULPI bypass control bit for all ports or individual bypass
control bits for each port. OMAP3 REV2.1 and earlier have the former.

Signed-off-by: Roger Quadros <rogerq at ti.com>
CC: Tony Lindgren <tony at atomide.com>
---
 arch/arm/mach-omap2/usb-host.c         |    4 ++++
 drivers/mfd/omap-usb-host.c            |    2 +-
 include/linux/platform_data/usb-omap.h |    3 +++
 3 files changed, 8 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index d1dbe12..2e44e8a 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -508,6 +508,10 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 	if (cpu_is_omap34xx()) {
 		setup_ehci_io_mux(pdata->port_mode);
 		setup_ohci_io_mux(pdata->port_mode);
+
+		if (omap_rev() <= OMAP3430_REV_ES2_1)
+			usbhs_data.single_ulpi_bypass = true;
+
 	} else if (cpu_is_omap44xx()) {
 		setup_4430ehci_io_mux(pdata->port_mode);
 		setup_4430ohci_io_mux(pdata->port_mode);
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index cebfe0a..fe7906b 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -384,7 +384,7 @@ static void omap_usbhs_init(struct device *dev)
 			reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
 
 		/* Bypass the TLL module for PHY mode operation */
-		if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
+		if (pdata->single_ulpi_bypass) {
 			dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
 			if (is_ehci_phy_mode(pdata->port_mode[0]) ||
 				is_ehci_phy_mode(pdata->port_mode[1]) ||
diff --git a/include/linux/platform_data/usb-omap.h b/include/linux/platform_data/usb-omap.h
index 8570bcf..ef65b67 100644
--- a/include/linux/platform_data/usb-omap.h
+++ b/include/linux/platform_data/usb-omap.h
@@ -59,6 +59,9 @@ struct usbhs_omap_platform_data {
 
 	struct ehci_hcd_omap_platform_data	*ehci_data;
 	struct ohci_hcd_omap_platform_data	*ohci_data;
+
+	/* OMAP3 <= ES2.1 have a single ulpi bypass control bit */
+	unsigned				single_ulpi_bypass:1;
 };
 
 /*-------------------------------------------------------------------------*/
-- 
1.7.4.1