[PATCH 7/9] memory: emif: disable phy_fast_dll_lock

[Lokesh Vutla]

From: Nishanth Menon <nm at ti.com>

As per OMAP5 TRM, phy_fast_dll_lock is meant for simulations only.
'0' is supposed to be used for normal operations. So, use 0.

Signed-off-by: Nishanth Menon <nm at ti.com>
---
 drivers/memory/emif.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/memory/emif.h b/drivers/memory/emif.h
index bfe08ba..574fdfb 100644
--- a/drivers/memory/emif.h
+++ b/drivers/memory/emif.h
@@ -82,7 +82,7 @@
 #define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS_ATTILAPHY 0xFF
 
 /* DDR_PHY_CTRL_1 values for EMIF4D5 INTELLIPHY combination */
-#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_INTELLIPHY		0x0E084200
+#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_INTELLIPHY		0x0E084000
 #define EMIF_PHY_TOTAL_READ_LATENCY_INTELLIPHY_PS	10000
 
 /* TEMP_ALERT_CONFIG - corresponding to temp gradient 5 C/s */
-- 
1.7.9.5