[PATCH 04/12] ARM: OMAP2xxx: PM: convert to use the functional power states API
Paul Walmsley
paul at pwsan.com
Sun Dec 9 12:53:12 EST 2012
From: Jean Pihet <jean.pihet at newoldbits.com>
Use the functional power states as the API to control power domains:
- use the PWRDM_FUNC_PWRST_* macros for the power states and logic
settings,
- the function pwrdm_set_next_fpwrst(), which controls the power domains
next power and logic settings, shall be used instead of
pwrdm_set_next_pwrst() to program the power domains next states,
- the function pwrdm_set_fpwrst(), which programs the power domains
power and logic settings, shall be used instead of
omap_set_pwrdm_state().
Signed-off-by: Jean Pihet <j-pihet at ti.com>
[paul at pwsan.com: split the original patch into OMAP2/3/4 variants; fix
commit message; update the power state programming to make sense;
warn if sets fail]
Signed-off-by: Paul Walmsley <paul at pwsan.com>
---
arch/arm/mach-omap2/pm24xx.c | 24 ++++++++++--------------
1 file changed, 10 insertions(+), 14 deletions(-)
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 4c06d8a..29abb63 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -89,8 +89,8 @@ static int omap2_enter_full_retention(void)
omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
- pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
- pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+ WARN_ON(pwrdm_set_next_fpwrst(core_pwrdm, PWRDM_FUNC_PWRST_CSWR));
+ WARN_ON(pwrdm_set_next_fpwrst(mpu_pwrdm, PWRDM_FUNC_PWRST_CSWR));
/* Workaround to kill USB */
l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
@@ -132,8 +132,8 @@ no_sleep:
/* Mask future PRCM-to-MPU interrupts */
omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
- pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
- pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON);
+ WARN_ON(pwrdm_set_next_fpwrst(mpu_pwrdm, PWRDM_FUNC_PWRST_ON));
+ WARN_ON(pwrdm_set_next_fpwrst(core_pwrdm, PWRDM_FUNC_PWRST_ON));
return 0;
}
@@ -184,16 +184,16 @@ static void omap2_enter_mpu_retention(void)
omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
/* Try to enter MPU retention */
- pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
-
+ WARN_ON(pwrdm_set_next_fpwrst(mpu_pwrdm,
+ PWRDM_FUNC_PWRST_CSWR));
} else {
/* Block MPU retention */
- pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
+ WARN_ON(pwrdm_set_next_fpwrst(mpu_pwrdm, PWRDM_FUNC_PWRST_ON));
}
omap2_sram_idle();
- pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
+ WARN_ON(pwrdm_set_next_fpwrst(mpu_pwrdm, PWRDM_FUNC_PWRST_ON));
}
static int omap2_can_sleep(void)
@@ -248,17 +248,13 @@ static void __init prcm_setup_regs(void)
for (i = 0; i < num_mem_banks; i++)
pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
- pwrdm_set_logic_retst(core_pwrdm, PWRDM_POWER_RET);
-
- pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
-
/* Force-power down DSP, GFX powerdomains */
pwrdm = clkdm_get_pwrdm(dsp_clkdm);
- pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+ WARN_ON(pwrdm_set_next_fpwrst(pwrdm, PWRDM_FUNC_PWRST_OFF));
pwrdm = clkdm_get_pwrdm(gfx_clkdm);
- pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+ WARN_ON(pwrdm_set_next_fpwrst(pwrdm, PWRDM_FUNC_PWRST_OFF));
/* Enable hardware-supervised idle for all clkdms */
clkdm_for_each(omap_pm_clkdms_setup, NULL);
More information about the linux-arm-kernel
mailing list