Question2: Determine subarch type

[Arnd Bergmann]

On Sunday 09 December 2012, Alexander Shiyan wrote:
> 
> On Sun, 9 Dec 2012 10:13:59 +0000
> Russell King - ARM Linux <linux at arm.linux.org.uk> wrote:
> 
> > > > > How can we determine the sub-architecture type from the driver code?
> > > > > For example, we are building a multi-platform kernel for subarch A and B.
> > > > > One of the drivers should be used for subarch A only, and can not be used for
> > > > > subarch B. So, we need to avoid load this driver for other sub-architectures.
> > > > > Of course, we can check all machines in the subarch with machine_is_xx() macro,
> > > > > but I think that this is not the best way to do it.
> > > > > Do we have another way to do this?
> > > > 
> > > > You control this by only registering the appropriate struct devices rather
> > > > than controlling this in the driver.
> > > 
> > > Yes, but if driver is compiled as module?
> > 
> > Makes no difference.
> 
> Do you mean that all the drivers for multi-platform targets should be
> converted to platform_drivers?

Right, if you have drivers that just use hardware directly rather than
registering a 'struct device_driver' of some sort, they should be 
converted. We did most of those conversions during linux-2.5 over
ten years ago, but a few may have slipped through into 2.6 and 3.x.

> OK, and what about (arch/fs/core/postcore)_initcall-s? Current multiplatform
> targets use these calls.

These all need to be audited and get extra checks to make sure they
only execute on hardware they are written for. Shawn Guo did a lot
of work in that area recently.

	Arnd