[PATCH 6/7] arm64: Add dts files for the ARMv8 RTSM model
Catalin Marinas
catalin.marinas at arm.com
Fri Dec 7 16:06:31 EST 2012
From: Pawel Moll <Pawel.Moll at arm.com>
Signed-off-by: Pawel Moll <Pawel.Moll at arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas at arm.com>
---
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/rtsm_ve-aemv8a.dts | 154 ++++++++++++++++++
arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi | 234 +++++++++++++++++++++++++++
3 files changed, 389 insertions(+)
create mode 100644 arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
create mode 100644 arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index e69de29..d7837c0 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -0,0 +1 @@
+dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
diff --git a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
new file mode 100644
index 0000000..15df04c
--- /dev/null
+++ b/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
@@ -0,0 +1,154 @@
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Architecture Envelope Model (AEM) ARMv8-A
+ * ARMAEMv8AMPCT
+ *
+ * RTSM_VE_AEMv8A.lisa
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+ model = "RTSM_VE_AEMv8A";
+ compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>,
+ <0x00000008 0x80000000 0 0x80000000>;
+ };
+
+ gic: interrupt-controller at 2c001000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0x2c001000 0 0x1000>,
+ <0 0x2c002000 0 0x100>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 14 0xff01>;
+ clock-frequency = <100000000>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 60 4>,
+ <0 61 4>,
+ <0 62 4>,
+ <0 63 4>;
+ };
+
+ smb {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 0 4>,
+ <0 0 1 &gic 0 1 4>,
+ <0 0 2 &gic 0 2 4>,
+ <0 0 3 &gic 0 3 4>,
+ <0 0 4 &gic 0 4 4>,
+ <0 0 5 &gic 0 5 4>,
+ <0 0 6 &gic 0 6 4>,
+ <0 0 7 &gic 0 7 4>,
+ <0 0 8 &gic 0 8 4>,
+ <0 0 9 &gic 0 9 4>,
+ <0 0 10 &gic 0 10 4>,
+ <0 0 11 &gic 0 11 4>,
+ <0 0 12 &gic 0 12 4>,
+ <0 0 13 &gic 0 13 4>,
+ <0 0 14 &gic 0 14 4>,
+ <0 0 15 &gic 0 15 4>,
+ <0 0 16 &gic 0 16 4>,
+ <0 0 17 &gic 0 17 4>,
+ <0 0 18 &gic 0 18 4>,
+ <0 0 19 &gic 0 19 4>,
+ <0 0 20 &gic 0 20 4>,
+ <0 0 21 &gic 0 21 4>,
+ <0 0 22 &gic 0 22 4>,
+ <0 0 23 &gic 0 23 4>,
+ <0 0 24 &gic 0 24 4>,
+ <0 0 25 &gic 0 25 4>,
+ <0 0 26 &gic 0 26 4>,
+ <0 0 27 &gic 0 27 4>,
+ <0 0 28 &gic 0 28 4>,
+ <0 0 29 &gic 0 29 4>,
+ <0 0 30 &gic 0 30 4>,
+ <0 0 31 &gic 0 31 4>,
+ <0 0 32 &gic 0 32 4>,
+ <0 0 33 &gic 0 33 4>,
+ <0 0 34 &gic 0 34 4>,
+ <0 0 35 &gic 0 35 4>,
+ <0 0 36 &gic 0 36 4>,
+ <0 0 37 &gic 0 37 4>,
+ <0 0 38 &gic 0 38 4>,
+ <0 0 39 &gic 0 39 4>,
+ <0 0 40 &gic 0 40 4>,
+ <0 0 41 &gic 0 41 4>,
+ <0 0 42 &gic 0 42 4>;
+
+ /include/ "rtsm_ve-motherboard.dtsi"
+ };
+};
+
diff --git a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
new file mode 100644
index 0000000..62a20d1
--- /dev/null
+++ b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
@@ -0,0 +1,234 @@
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Versatile Express (VE) system model
+ * Motherboard component
+ *
+ * VEMotherBoard.lisa
+ */
+
+ motherboard {
+ arm,v2m-memory-map = "rs1";
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ ranges;
+
+ flash at 0,00000000 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <4 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ vram at 2,00000000 {
+ compatible = "arm,vexpress-vram";
+ reg = <2 0x00000000 0x00800000>;
+ };
+
+ ethernet at 2,02000000 {
+ compatible = "smsc,lan91c111";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <15>;
+ };
+
+ iofpga at 3,00000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
+
+ v2m_sysreg: sysreg at 010000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_sysctl: sysctl at 020000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ };
+
+ aaci at 040000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x040000 0x1000>;
+ interrupts = <11>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ mmci at 050000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x050000 0x1000>;
+ interrupts = <9 10>;
+ cd-gpios = <&v2m_sysreg 0 0>;
+ wp-gpios = <&v2m_sysreg 1 0>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&v2m_fixed_3v3>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "mclk", "apb_pclk";
+ };
+
+ kmi at 060000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x060000 0x1000>;
+ interrupts = <12>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi at 070000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x070000 0x1000>;
+ interrupts = <13>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ v2m_serial0: uart at 090000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <5>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial1: uart at 0a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial2: uart at 0b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <7>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial3: uart at 0c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <8>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ wdt at 0f0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f0000 0x1000>;
+ interrupts = <0>;
+ clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
+ v2m_timer01: timer at 110000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x110000 0x1000>;
+ interrupts = <2>;
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ v2m_timer23: timer at 120000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x120000 0x1000>;
+ interrupts = <3>;
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ rtc at 170000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x170000 0x1000>;
+ interrupts = <4>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ clcd at 1f0000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f0000 0x1000>;
+ interrupts = <14>;
+ clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
+ clock-names = "clcdclk", "apb_pclk";
+ };
+ };
+
+ v2m_fixed_3v3: fixedregulator at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
+ };
+
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
+ };
+
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
+ };
+
+ mcc {
+ compatible = "arm,vexpress,config-bus", "simple-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ v2m_oscclk1: osc at 1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 63500000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ reset at 0 {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga at 0 {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown at 0 {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot at 0 {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode at 0 {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
+ };
More information about the linux-arm-kernel
mailing list