[PATCH v7 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND

[Daniel Mack]

On 06.12.2012 17:22, Jon Hunter wrote:
> 
> On 12/05/2012 06:03 PM, Tony Lindgren wrote:
>> * Grant Likely <grant.likely at secretlab.ca> [121205 15:26]:
>>> On Wed, 5 Dec 2012 16:33:48 -0600, Jon Hunter <jon-hunter at ti.com> wrote:
>>>> On 12/05/2012 04:22 PM, Grant Likely wrote:
>>>>>
>>>>> Please, be specific. Use something like "ti,am3340-gpmc" or
>>>>> "ti,omap3430-gpmc". The compatible property is a list so that new
>>>>> devices can claim compatibility with old. Compatible strings that are
>>>>> overly generic are a pet-peave of mine.
>>>>
>>>> We aim to use the binding for omap2,3,4,5 as well as the am33xx devices
>>>> (which are omap based). Would it be sufficient to have "ti,omap2-gpmc"
>>>> implying all omap2+ based devices or should we have a compatible string
>>>> for each device supported?
>>>
>>> Are they each register-level compatible with one another?
>>>
>>> The general recommended approach here is to make subsequent silicon
>>> claim compatibility with the first compatible implementation.
>>>
>>> So, for an am3358 board:
>>> 	compatible = "ti,am3358-gpmc", "ti,omap2420-gpmc";
>>>
>>> Essentially, what this means is that "ti,omap2420-gpmc" is the generic
>>> value instead of "omap2-gpmc". The reason for this is so that the value
>>> is anchored against a specific implementation, and not against something
>>> completely imaginary or idealized. If a newer version isn't quite
>>> compatible with the omap2420-gpmc, then it can drop the compatible claim
>>> and the driver really should be told about the new device.
>>
>> The compatible property can also be used to figure out which ones
>> need the workarounds in patch #4 of this series for the DT case.
>> So we should be specific with the compatible.
> 
> We should not merged patch #4. Daniel included this here because he is
> using this on the current mainline, however, this is not needed for
> linux-next and so we should drop it.

I think we're talking about different things here since awhile.

The patch I pointed you which is in mainline and which removes the
reference to <plat/gpmc.h> from drivers/mtd/nand/omap2.c has nothing to
do with my patch #4. It just solves Tony's concern that regarding the
multi-arch zImages.

My code in gpmc.c calls gpmc_nand_init() which in turn calls
gpmc_hwecc_bch_capable(). Without path #4, gpmc_hwecc_bch_capable() will
return 0, and the nand init will fail consequently, in mainline as well
as in linux-next.

I understood Tony that he wanted to remove the entiry function and do
the check based on DT properties, which will then solve the problem on a
different level. However, that change is planned for *after* the merge
window.


Daniel