[V2 PATCH 1/2] rtc: sa1100: move clock enable/disable to probe/remove

[Haojian Zhuang]

On Wed, Dec 5, 2012 at 2:49 PM, Chao Xie <chao.xie at marvell.com> wrote:
> The original sa1100_rtc_open/sa1100_rtc_release will be called
> when the /dev/rtc0 is opened or closed.
> In fact, these two functions will enable/disable the clock.
> Disabling clock will make rtc not work.
> So only enable/disable clock when probe/remove the device.
>
> Signed-off-by: Chao Xie <chao.xie at marvell.com>
> ---
>  drivers/rtc/rtc-sa1100.c |   11 ++++++-----
>  1 files changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
> index 50a5c4a..34f66b8 100644
> --- a/drivers/rtc/rtc-sa1100.c
> +++ b/drivers/rtc/rtc-sa1100.c
> @@ -108,9 +108,6 @@ static int sa1100_rtc_open(struct device *dev)
>         struct rtc_device *rtc = info->rtc;
>         int ret;
>
> -       ret = clk_prepare_enable(info->clk);
> -       if (ret)
> -               goto fail_clk;
>         ret = request_irq(info->irq_1hz, sa1100_rtc_interrupt, 0, "rtc 1Hz", dev);
>         if (ret) {
>                 dev_err(dev, "IRQ %d already in use.\n", info->irq_1hz);
> @@ -130,7 +127,6 @@ static int sa1100_rtc_open(struct device *dev)
>         free_irq(info->irq_1hz, dev);
>   fail_ui:
>         clk_disable_unprepare(info->clk);
> - fail_clk:
>         return ret;
>  }
>
> @@ -144,7 +140,6 @@ static void sa1100_rtc_release(struct device *dev)
>
>         free_irq(info->irq_alarm, dev);
>         free_irq(info->irq_1hz, dev);
> -       clk_disable_unprepare(info->clk);
>  }
>
>  static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
> @@ -253,6 +248,9 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
>         spin_lock_init(&info->lock);
>         platform_set_drvdata(pdev, info);
>
> +       ret = clk_prepare_enable(info->clk);
> +       if (ret)
> +               goto err_enable_clk;
>         /*
>          * According to the manual we should be able to let RTTR be zero
>          * and then a default diviser for a 32.768KHz clock is used.
> @@ -305,6 +303,8 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
>
>         return 0;
>  err_dev:
> +       clk_disable_unprepare(info->clk);
> +err_enable_clk:
>         platform_set_drvdata(pdev, NULL);
>         clk_put(info->clk);
>  err_clk:
> @@ -318,6 +318,7 @@ static int sa1100_rtc_remove(struct platform_device *pdev)
>
>         if (info) {
>                 rtc_device_unregister(info->rtc);
> +               clk_disable_unprepare(info->clk);
>                 clk_put(info->clk);
>                 platform_set_drvdata(pdev, NULL);
>                 kfree(info);
> --
> 1.7.4.1
>

Acked-by: Haojian Zhuang <haojian.zhuang at gmail.com>