[PATCH 1/1] ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree
Simon Baatz
gmbnomis at gmail.com
Mon Apr 30 17:55:17 EDT 2012
Add support for the IB-NAS6210 and IB-NAS 6220. Describe as much as
currently possible in the devicetree files, including the NAND partitions.
Use the partition scheme of the original firmware by default.
Create a board-ib62x0.c for everything else.
Signed-off-by: Simon Baatz <gmbnomis at gmail.com>
---
arch/arm/boot/dts/kirkwood-ib62x0.dts | 44 ++++++++++
arch/arm/mach-kirkwood/Kconfig | 8 ++
arch/arm/mach-kirkwood/Makefile | 1 +
arch/arm/mach-kirkwood/Makefile.boot | 1 +
arch/arm/mach-kirkwood/board-dt.c | 4 +
arch/arm/mach-kirkwood/board-ib62x0.c | 143 +++++++++++++++++++++++++++++++++
arch/arm/mach-kirkwood/common.h | 6 ++
7 files changed, 207 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/kirkwood-ib62x0.dts
create mode 100644 arch/arm/mach-kirkwood/board-ib62x0.c
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
new file mode 100644
index 0000000..ada0f0c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -0,0 +1,44 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+ model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
+ compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+
+ ocp at f1000000 {
+ serial at 12000 {
+ clock-frequency = <200000000>;
+ status = "okay";
+ };
+
+ nand at 3000000 {
+ status = "okay";
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>;
+ };
+
+ partition at 100000 {
+ label = "uImage";
+ reg = <0x0100000 0x600000>;
+ };
+
+ partition at 700000 {
+ label = "root";
+ reg = <0x0700000 0xf900000>;
+ };
+
+ };
+ };
+};
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 636778e..4daf6ab 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -66,6 +66,14 @@ config MACH_DLINK_KIRKWOOD_DT
Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
using Flattened Device Tree.
+config MACH_IB62X0_DT
+ bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
+ Flattened Device Tree.
+
config MACH_TS219
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 36781b3..c372948 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
+obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index 8bbffbe..042fcad 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -5,3 +5,4 @@ initrd_phys-y := 0x00800000
dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
+dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index eadc4d7..ff1b545 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -58,6 +58,9 @@ static void __init kirkwood_dt_init(void)
if (of_machine_is_compatible("dlink,dns-kirkwood"))
dnskw_init();
+ if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
+ ib62x0_init();
+
of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
}
@@ -65,6 +68,7 @@ static const char *kirkwood_dt_board_compat[] = {
"globalscale,dreamplug",
"dlink,dns-320",
"dlink,dns-325",
+ "raidsonic,ib-nas62x0",
NULL
};
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
new file mode 100644
index 0000000..eddf1df
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -0,0 +1,143 @@
+/*
+ * Copyright 2012 (C), Simon Baatz <gmbnomis at gmail.com>
+ *
+ * arch/arm/mach-kirkwood/board-ib62x0.c
+ *
+ * RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not
+ * converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+#define IB62X0_GPIO_POWER_OFF 24
+
+static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data ib62x0_sata_data = {
+ .n_ports = 2,
+};
+
+static unsigned int ib62x0_mpp_config[] __initdata = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP22_GPIO, /* OS LED red */
+ MPP24_GPIO, /* Power off device */
+ MPP25_GPIO, /* OS LED green */
+ MPP27_GPIO, /* USB transfer LED */
+ MPP28_GPIO, /* Reset button */
+ MPP29_GPIO, /* USB Copy button */
+ 0
+};
+
+static struct gpio_led ib62x0_led_pins[] = {
+ {
+ .name = "ib62x0:green:os",
+ .default_trigger = "default-on",
+ .gpio = 25,
+ .active_low = 0,
+ },
+ {
+ .name = "ib62x0:red:os",
+ .default_trigger = "none",
+ .gpio = 22,
+ .active_low = 0,
+ },
+ {
+ .name = "ib62x0:red:usb_copy",
+ .default_trigger = "none",
+ .gpio = 27,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_led_platform_data ib62x0_led_data = {
+ .leds = ib62x0_led_pins,
+ .num_leds = ARRAY_SIZE(ib62x0_led_pins),
+};
+
+static struct platform_device ib62x0_led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ib62x0_led_data,
+ }
+};
+
+static struct gpio_keys_button ib62x0_button_pins[] = {
+ {
+ .code = KEY_COPY,
+ .gpio = 29,
+ .desc = "USB Copy",
+ .active_low = 1,
+ },
+ {
+ .code = KEY_RESTART,
+ .gpio = 28,
+ .desc = "Reset",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data ib62x0_button_data = {
+ .buttons = ib62x0_button_pins,
+ .nbuttons = ARRAY_SIZE(ib62x0_button_pins),
+};
+
+static struct platform_device ib62x0_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ib62x0_button_data,
+ }
+};
+
+static void ib62x0_power_off(void)
+{
+ gpio_set_value(IB62X0_GPIO_POWER_OFF, 1);
+}
+
+void __init ib62x0_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_mpp_conf(ib62x0_mpp_config);
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&ib62x0_ge00_data);
+ kirkwood_sata_init(&ib62x0_sata_data);
+ platform_device_register(&ib62x0_led_device);
+ platform_device_register(&ib62x0_button_device);
+ if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
+ gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)
+ pm_power_off = ib62x0_power_off;
+ else
+ pr_err("board-ib62x0: failed to configure power-off GPIO\n");
+}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 6195a37..9fb301a 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -64,6 +64,12 @@ void dnskw_init(void);
static inline void dnskw_init(void) {};
#endif
+#ifdef CONFIG_MACH_IB62X0_DT
+void ib62x0_init(void);
+#else
+static inline void ib62x0_init(void) {};
+#endif
+
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
--
1.7.5.4
More information about the linux-arm-kernel
mailing list