[RFC PATCH 00/11 V6] MXS: Add i.MX28 USB Host driver

[Marek Vasut]

This patchset introduces the USB Host driver for i.MX28 CPU, utilising the
generic USB PHY infrastructure. Also added is glue code for CI13xxx driver, to
allow device mode. This patchset still does NOT support OTG mode, the
device/host mode is selected via platform data.

V2: Introduce stub imx-usb driver that then registers the PHY and EHCI drivers.
V3: Add the HCD on demand based on the PHY's state (only add HCD if it's host).
    Currently, only the HOST mode is supported.
V4: * Introduce ci13xxx gadget glue
    * Reorder patches in a more sensible order
    * Introduce platform data, containing VBUS GPIO and port mode (device/gadget)
    * Rename imx-usb to imx-otg
    * Drop mx28evk usb host patch
    * Use more devm_ function
    * Rework the mxs-phy to register the same interrupt as ehci-mxs (and
      effectivelly kill bogus otg_set_vbus() call from ehci-mxs ; use standard
      ehci irq handling in ehci-mxs)
V5: * Finally move OTG IRQ handling into imx-otg
    * Move imx_otg_set_{host,peripheral}() into imx-otg
    * Move imx_otg_work() into imx-otg driver (now it all makes sense, yay!)
V6: Do PHY-specific job inside the PHY driver

Marek Vasut (11):
  MXS: Make clk_disable return integer
  MXS: Add USB EHCI and USB PHY clock handling
  MXS: Fixup i.MX233 USB base address name
  MXS: Add data shared between imx-otg and EHCI driver
  MXS: Modify the ci13xxx_udc to avoid adding UDC
  MXS: Add small registration glue for ci13xxx_udc
  MXS: Add separate MXS EHCI HCD driver
  MXS: Add imx-otg driver
  MXS: Add USB PHY driver
  MXS: Add platform registration hooks for USB EHCI
  MXS: Enable USB on M28EVK

 arch/arm/mach-mxs/Kconfig                       |    2 +
 arch/arm/mach-mxs/clock-mx28.c                  |   28 +-
 arch/arm/mach-mxs/devices-mx28.h                |    5 +
 arch/arm/mach-mxs/devices/Kconfig               |    3 +
 arch/arm/mach-mxs/devices/Makefile              |    1 +
 arch/arm/mach-mxs/devices/platform-usb.c        |   89 +++++
 arch/arm/mach-mxs/include/mach/clock.h          |    2 +-
 arch/arm/mach-mxs/include/mach/devices-common.h |   13 +
 arch/arm/mach-mxs/include/mach/mx23.h           |    8 +-
 arch/arm/mach-mxs/mach-m28evk.c                 |   21 ++
 drivers/usb/gadget/Kconfig                      |   17 +
 drivers/usb/gadget/Makefile                     |    1 +
 drivers/usb/gadget/ci13xxx_mxs.c                |   67 ++++
 drivers/usb/gadget/ci13xxx_udc.c                |   12 +-
 drivers/usb/gadget/ci13xxx_udc.h                |    1 +
 drivers/usb/host/Kconfig                        |    7 +
 drivers/usb/host/ehci-hcd.c                     |    5 +
 drivers/usb/host/ehci-mxs.c                     |  178 +++++++++
 drivers/usb/otg/Kconfig                         |   16 +
 drivers/usb/otg/Makefile                        |    2 +
 drivers/usb/otg/imx-otg.c                       |  437 +++++++++++++++++++++++
 drivers/usb/otg/mxs-phy.c                       |  293 +++++++++++++++
 include/linux/usb/mxs-usb.h                     |   94 +++++
 23 files changed, 1289 insertions(+), 13 deletions(-)
 create mode 100644 arch/arm/mach-mxs/devices/platform-usb.c
 create mode 100644 drivers/usb/gadget/ci13xxx_mxs.c
 create mode 100644 drivers/usb/host/ehci-mxs.c
 create mode 100644 drivers/usb/otg/imx-otg.c
 create mode 100644 drivers/usb/otg/mxs-phy.c
 create mode 100644 include/linux/usb/mxs-usb.h

Cc: Chen Peter-B29397 <B29397 at freescale.com>
Cc: Detlev Zundel <dzu at denx.de>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Li Frank-B20596 <B20596 at freescale.com>
Cc: Linux USB <linux-usb at vger.kernel.org>
Cc: Liu JunJie-B08287 <B08287 at freescale.com>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
Cc: Shawn Guo <shawn.guo at linaro.org>
Cc: Shi Make-B15407 <B15407 at freescale.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Subodh Nijsure <snijsure at grid-net.com>
Cc: Wolfgang Denk <wd at denx.de>

-- 
1.7.10