[PATCH v2 3/8] clk: mxs: add clock support for imx28
Shawn Guo
shawn.guo at linaro.org
Sat Apr 28 12:02:36 EDT 2012
Add imx28 clock support based on common clk framework.
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
drivers/clk/mxs/Makefile | 1 +
drivers/clk/mxs/clk-imx28.c | 328 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 329 insertions(+), 0 deletions(-)
create mode 100644 drivers/clk/mxs/clk-imx28.c
diff --git a/drivers/clk/mxs/Makefile b/drivers/clk/mxs/Makefile
index 7086ad3..7bedeec 100644
--- a/drivers/clk/mxs/Makefile
+++ b/drivers/clk/mxs/Makefile
@@ -5,3 +5,4 @@
obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o
obj-$(CONFIG_SOC_IMX23) += clk-imx23.o
+obj-$(CONFIG_SOC_IMX28) += clk-imx28.o
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
new file mode 100644
index 0000000..7617894
--- /dev/null
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -0,0 +1,328 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <mach/common.h>
+#include <mach/mx28.h>
+#include "clk.h"
+
+#define CLKCTRL MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR)
+#define PLL0CTRL0 (CLKCTRL + 0x0000)
+#define PLL1CTRL0 (CLKCTRL + 0x0020)
+#define PLL2CTRL0 (CLKCTRL + 0x0040)
+#define CPU (CLKCTRL + 0x0050)
+#define HBUS (CLKCTRL + 0x0060)
+#define XBUS (CLKCTRL + 0x0070)
+#define XTAL (CLKCTRL + 0x0080)
+#define SSP0 (CLKCTRL + 0x0090)
+#define SSP1 (CLKCTRL + 0x00a0)
+#define SSP2 (CLKCTRL + 0x00b0)
+#define SSP3 (CLKCTRL + 0x00c0)
+#define GPMI (CLKCTRL + 0x00d0)
+#define SPDIF (CLKCTRL + 0x00e0)
+#define EMI (CLKCTRL + 0x00f0)
+#define SAIF0 (CLKCTRL + 0x0100)
+#define SAIF1 (CLKCTRL + 0x0110)
+#define LCDIF (CLKCTRL + 0x0120)
+#define ETM (CLKCTRL + 0x0130)
+#define ENET (CLKCTRL + 0x0140)
+#define FLEXCAN (CLKCTRL + 0x0160)
+#define FRAC0 (CLKCTRL + 0x01b0)
+#define FRAC1 (CLKCTRL + 0x01c0)
+#define CLKSEQ (CLKCTRL + 0x01d0)
+
+#define BP_CPU_INTERRUPT_WAIT 12
+#define BP_SAIF_DIV_FRAC_EN 16
+#define BP_ENET_DIV_TIME 21
+#define BP_ENET_SLEEP 31
+#define BP_CLKSEQ_BYPASS_SAIF0 0
+#define BP_CLKSEQ_BYPASS_SSP0 3
+#define BP_FRAC0_IO1FRAC 16
+#define BP_FRAC0_IO0FRAC 24
+
+#define DIGCTRL MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR)
+#define BP_SAIF_CLKMUX 10
+
+/*
+ * HW_SAIF_CLKMUX_SEL:
+ * DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
+ * clock pins selected for SAIF1 input clocks.
+ * CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and
+ * SAIF0 clock inputs selected for SAIF1 input clocks.
+ * EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input
+ * clocks.
+ * EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input
+ * clocks.
+ */
+int mxs_saif_clkmux_select(unsigned int clkmux)
+{
+ if (clkmux > 0x3)
+ return -EINVAL;
+
+ __mxs_clrl(0x3 << BP_SAIF_CLKMUX, DIGCTRL);
+ __mxs_setl(clkmux << BP_SAIF_CLKMUX, DIGCTRL);
+
+ return 0;
+}
+
+static void __init clk_misc_init(void)
+{
+ u32 val;
+
+ /* Gate off cpu clock in WFI for power saving */
+ __mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU);
+
+ /* 0 is a bad default value for a divider */
+ __mxs_setl(1 << BP_ENET_DIV_TIME, ENET);
+
+ /* Clear BYPASS for SAIF */
+ __mxs_clrl(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ);
+
+ /* SAIF has to use frac div for functional operation */
+ val = readl_relaxed(SAIF0);
+ val |= 1 << BP_SAIF_DIV_FRAC_EN;
+ writel_relaxed(val, SAIF0);
+
+ val = readl_relaxed(SAIF1);
+ val |= 1 << BP_SAIF_DIV_FRAC_EN;
+ writel_relaxed(val, SAIF1);
+
+ /* Extra fec clock setting */
+ val = readl_relaxed(ENET);
+ val &= ~(1 << BP_ENET_SLEEP);
+ writel_relaxed(val, ENET);
+
+ /*
+ * Source ssp clock from ref_io than ref_xtal,
+ * as ref_xtal only provides 24 MHz as maximum.
+ */
+ __mxs_clrl(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ);
+}
+
+static struct clk_lookup uart_lookups[] __initdata = {
+ { .dev_id = "duart", },
+ { .dev_id = "mxs-auart.0", },
+ { .dev_id = "mxs-auart.1", },
+ { .dev_id = "mxs-auart.2", },
+ { .dev_id = "mxs-auart.3", },
+ { .dev_id = "mxs-auart.4", },
+ { .dev_id = "8006a000.serial", },
+ { .dev_id = "8006c000.serial", },
+ { .dev_id = "8006e000.serial", },
+ { .dev_id = "80070000.serial", },
+ { .dev_id = "80072000.serial", },
+ { .dev_id = "80074000.serial", },
+};
+
+static struct clk_lookup hbus_lookups[] __initdata = {
+ { .dev_id = "mxs-dma-apbh", },
+ { .dev_id = "80004000.dma-apbh", },
+};
+
+static struct clk_lookup xbus_lookups[] __initdata = {
+ { .dev_id = "duart", .con_id = "apb_pclk"},
+ { .dev_id = "mxs-dma-apbx", },
+ { .dev_id = "80024000.dma-apbx", },
+};
+
+static struct clk_lookup ssp0_lookups[] __initdata = {
+ { .dev_id = "mxs-mmc.0", },
+ { .dev_id = "80010000.ssp", },
+};
+
+static struct clk_lookup ssp1_lookups[] __initdata = {
+ { .dev_id = "mxs-mmc.1", },
+ { .dev_id = "80012000.ssp", },
+};
+
+static struct clk_lookup ssp2_lookups[] __initdata = {
+ { .dev_id = "mxs-mmc.2", },
+ { .dev_id = "80014000.ssp", },
+};
+
+static struct clk_lookup ssp3_lookups[] __initdata = {
+ { .dev_id = "mxs-mmc.3", },
+ { .dev_id = "80016000.ssp", },
+};
+
+static struct clk_lookup lcdif_lookups[] __initdata = {
+ { .dev_id = "imx28-fb", },
+ { .dev_id = "80030000.lcdif", },
+};
+
+static struct clk_lookup gpmi_lookups[] __initdata = {
+ { .dev_id = "imx28-gpmi-nand", },
+ { .dev_id = "8000c000.gpmi", },
+};
+
+static struct clk_lookup fec_lookups[] __initdata = {
+ { .dev_id = "imx28-fec.0", },
+ { .dev_id = "imx28-fec.1", },
+ { .dev_id = "800f0000.ethernet", },
+ { .dev_id = "800f4000.ethernet", },
+};
+
+static struct clk_lookup can0_lookups[] __initdata = {
+ { .dev_id = "flexcan.0", },
+ { .dev_id = "80032000.can", },
+};
+
+static struct clk_lookup can1_lookups[] __initdata = {
+ { .dev_id = "flexcan.1", },
+ { .dev_id = "80034000.can", },
+};
+
+static struct clk_lookup saif0_lookups[] __initdata = {
+ { .dev_id = "mxs-saif.0", },
+ { .dev_id = "80042000.saif", },
+};
+
+static struct clk_lookup saif1_lookups[] __initdata = {
+ { .dev_id = "mxs-saif.1", },
+ { .dev_id = "80046000.saif", },
+};
+
+static const char *sel_cpu[] __initconst = { "ref_cpu", "ref_xtal", };
+static const char *sel_io0[] __initconst = { "ref_io0", "ref_xtal", };
+static const char *sel_io1[] __initconst = { "ref_io1", "ref_xtal", };
+static const char *sel_pix[] __initconst = { "ref_pix", "ref_xtal", };
+static const char *sel_gpmi[] __initconst = { "ref_gpmi", "ref_xtal", };
+static const char *sel_pll0[] __initconst = { "pll0", "ref_xtal", };
+static const char *cpu_sels[] __initconst = { "cpu_pll", "cpu_xtal", };
+static const char *emi_sels[] __initconst = { "emi_pll", "emi_xtal", };
+static const char *ptp_sels[] __initconst = { "ref_xtal", "pll0", };
+
+enum imx28_clk {
+ ref_xtal, pll0, pll1, pll2, ref_cpu, ref_emi, ref_io0, ref_io1,
+ ref_pix, ref_hsadc, ref_gpmi, saif0_sel, saif1_sel, gpmi_sel,
+ ssp0_sel, ssp1_sel, ssp2_sel, ssp3_sel, emi_sel, etm_sel,
+ lcdif_sel, cpu, ptp_sel, cpu_pll, cpu_xtal, hbus, xbus,
+ ssp0_div, ssp1_div, ssp2_div, ssp3_div, gpmi_div, emi_pll,
+ emi_xtal, lcdif_div, etm_div, ptp, saif0_div, saif1_div,
+ clk32k_div, rtc, lradc, spdif_div, clk32k, pwm, uart, ssp0,
+ ssp1, ssp2, ssp3, gpmi, spdif, emi, saif0, saif1, lcdif, etm,
+ fec, can0, can1, usb0, usb1, usb0_pwr, usb1_pwr, enet_out,
+ clk_max
+};
+
+static struct clk *clks[clk_max];
+
+static enum imx28_clk clks_init_on[] __initdata = {
+ cpu, hbus, xbus, emi, uart,
+};
+
+int __init mx28_clocks_init(void)
+{
+ int i;
+
+ clk_misc_init();
+
+ clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
+ clks[pll0] = mxs_clk_pll("pll0", "ref_xtal", PLL0CTRL0, 17, 480000000);
+ clks[pll1] = mxs_clk_pll("pll1", "ref_xtal", PLL1CTRL0, 17, 480000000);
+ clks[pll2] = mxs_clk_pll("pll2", "ref_xtal", PLL2CTRL0, 23, 50000000);
+ clks[ref_cpu] = mxs_clk_ref("ref_cpu", "pll0", FRAC0, 0);
+ clks[ref_emi] = mxs_clk_ref("ref_emi", "pll0", FRAC0, 1);
+ clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 2);
+ clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 3);
+ clks[ref_pix] = mxs_clk_ref("ref_pix", "pll0", FRAC1, 0);
+ clks[ref_hsadc] = mxs_clk_ref("ref_hsadc", "pll0", FRAC1, 1);
+ clks[ref_gpmi] = mxs_clk_ref("ref_gpmi", "pll0", FRAC1, 2);
+ clks[saif0_sel] = mxs_clk_mux("saif0_sel", CLKSEQ, 0, 1, sel_pll0, ARRAY_SIZE(sel_pll0));
+ clks[saif1_sel] = mxs_clk_mux("saif1_sel", CLKSEQ, 1, 1, sel_pll0, ARRAY_SIZE(sel_pll0));
+ clks[gpmi_sel] = mxs_clk_mux("gpmi_sel", CLKSEQ, 2, 1, sel_gpmi, ARRAY_SIZE(sel_gpmi));
+ clks[ssp0_sel] = mxs_clk_mux("ssp0_sel", CLKSEQ, 3, 1, sel_io0, ARRAY_SIZE(sel_io0));
+ clks[ssp1_sel] = mxs_clk_mux("ssp1_sel", CLKSEQ, 4, 1, sel_io0, ARRAY_SIZE(sel_io0));
+ clks[ssp2_sel] = mxs_clk_mux("ssp2_sel", CLKSEQ, 5, 1, sel_io1, ARRAY_SIZE(sel_io1));
+ clks[ssp3_sel] = mxs_clk_mux("ssp3_sel", CLKSEQ, 6, 1, sel_io1, ARRAY_SIZE(sel_io1));
+ clks[emi_sel] = mxs_clk_mux("emi_sel", CLKSEQ, 7, 1, emi_sels, ARRAY_SIZE(emi_sels));
+ clks[etm_sel] = mxs_clk_mux("etm_sel", CLKSEQ, 8, 1, sel_cpu, ARRAY_SIZE(sel_cpu));
+ clks[lcdif_sel] = mxs_clk_mux("lcdif_sel", CLKSEQ, 14, 1, sel_pix, ARRAY_SIZE(sel_pix));
+ clks[cpu] = mxs_clk_mux("cpu", CLKSEQ, 18, 1, cpu_sels, ARRAY_SIZE(cpu_sels));
+ clks[ptp_sel] = mxs_clk_mux("ptp_sel", ENET, 19, 1, ptp_sels, ARRAY_SIZE(ptp_sels));
+ clks[cpu_pll] = mxs_clk_div("cpu_pll", "ref_cpu", CPU, 0, 6, 28);
+ clks[cpu_xtal] = mxs_clk_div("cpu_xtal", "ref_xtal", CPU, 16, 10, 29);
+ clks[hbus] = mxs_clk_div("hbus", "cpu", HBUS, 0, 5, 31);
+ clks[xbus] = mxs_clk_div("xbus", "ref_xtal", XBUS, 0, 10, 31);
+ clks[ssp0_div] = mxs_clk_div("ssp0_div", "ssp0_sel", SSP0, 0, 9, 29);
+ clks[ssp1_div] = mxs_clk_div("ssp1_div", "ssp1_sel", SSP1, 0, 9, 29);
+ clks[ssp2_div] = mxs_clk_div("ssp2_div", "ssp2_sel", SSP2, 0, 9, 29);
+ clks[ssp3_div] = mxs_clk_div("ssp3_div", "ssp3_sel", SSP3, 0, 9, 29);
+ clks[gpmi_div] = mxs_clk_div("gpmi_div", "gpmi_sel", GPMI, 0, 10, 29);
+ clks[emi_pll] = mxs_clk_div("emi_pll", "ref_emi", EMI, 0, 6, 28);
+ clks[emi_xtal] = mxs_clk_div("emi_xtal", "ref_xtal", EMI, 8, 4, 29);
+ clks[lcdif_div] = mxs_clk_div("lcdif_div", "lcdif_sel", LCDIF, 0, 13, 29);
+ clks[etm_div] = mxs_clk_div("etm_div", "etm_sel", ETM, 0, 7, 29);
+ clks[ptp] = mxs_clk_div("ptp", "ptp_sel", ENET, 21, 6, 27);
+ clks[saif0_div] = mxs_clk_frac("saif0_div", "saif0_sel", SAIF0, 0, 16, 29);
+ clks[saif1_div] = mxs_clk_frac("saif1_div", "saif1_sel", SAIF1, 0, 16, 29);
+ clks[clk32k_div] = mxs_clk_fixed_factor("clk32k_div", "ref_xtal", 1, 750);
+ clks[rtc] = mxs_clk_fixed_factor("rtc", "ref_xtal", 1, 768);
+ clks[lradc] = mxs_clk_fixed_factor("lradc", "clk32k", 1, 16);
+ clks[spdif_div] = mxs_clk_fixed_factor("spdif_div", "pll0", 1, 4);
+ clks[clk32k] = mxs_clk_gate("clk32k", "clk32k_div", XTAL, 26);
+ clks[pwm] = mxs_clk_gate("pwm", "ref_xtal", XTAL, 29);
+ clks[uart] = mxs_clk_gate("uart", "ref_xtal", XTAL, 31);
+ clks[ssp0] = mxs_clk_gate("ssp0", "ssp0_div", SSP0, 31);
+ clks[ssp1] = mxs_clk_gate("ssp1", "ssp1_div", SSP1, 31);
+ clks[ssp2] = mxs_clk_gate("ssp2", "ssp2_div", SSP2, 31);
+ clks[ssp3] = mxs_clk_gate("ssp3", "ssp3_div", SSP3, 31);
+ clks[gpmi] = mxs_clk_gate("gpmi", "gpmi_div", GPMI, 31);
+ clks[spdif] = mxs_clk_gate("spdif", "spdif_div", SPDIF, 31);
+ clks[emi] = mxs_clk_gate("emi", "emi_sel", EMI, 31);
+ clks[saif0] = mxs_clk_gate("saif0", "saif0_div", SAIF0, 31);
+ clks[saif1] = mxs_clk_gate("saif1", "saif1_div", SAIF1, 31);
+ clks[lcdif] = mxs_clk_gate("lcdif", "lcdif_div", LCDIF, 31);
+ clks[etm] = mxs_clk_gate("etm", "etm_div", ETM, 31);
+ clks[fec] = mxs_clk_gate("fec", "hbus", ENET, 30);
+ clks[can0] = mxs_clk_gate("can0", "ref_xtal", FLEXCAN, 30);
+ clks[can1] = mxs_clk_gate("can1", "ref_xtal", FLEXCAN, 28);
+ clks[usb0] = mxs_clk_gate("usb0", "usb0_pwr", DIGCTRL, 2);
+ clks[usb1] = mxs_clk_gate("usb1", "usb1_pwr", DIGCTRL, 16);
+ clks[usb0_pwr] = clk_register_gate(NULL, "usb0_pwr", "pll0", 0, PLL0CTRL0, 18, 0, &mxs_lock);
+ clks[usb1_pwr] = clk_register_gate(NULL, "usb1_pwr", "pll1", 0, PLL1CTRL0, 18, 0, &mxs_lock);
+ clks[enet_out] = clk_register_gate(NULL, "enet_out", "pll2", 0, ENET, 18, 0, &mxs_lock);
+
+ for (i = 0; i < ARRAY_SIZE(clks); i++)
+ if (IS_ERR(clks[i])) {
+ pr_err("i.MX28 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clks[i]));
+ return PTR_ERR(clks[i]);
+ }
+
+ clk_register_clkdev(clks[clk32k], NULL, "timrot");
+ clk_register_clkdev(clks[enet_out], NULL, "enet_out");
+ clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
+ clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
+ clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));
+ clk_register_clkdevs(clks[ssp0], ssp0_lookups, ARRAY_SIZE(ssp0_lookups));
+ clk_register_clkdevs(clks[ssp1], ssp1_lookups, ARRAY_SIZE(ssp1_lookups));
+ clk_register_clkdevs(clks[ssp2], ssp2_lookups, ARRAY_SIZE(ssp2_lookups));
+ clk_register_clkdevs(clks[ssp3], ssp3_lookups, ARRAY_SIZE(ssp3_lookups));
+ clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups));
+ clk_register_clkdevs(clks[saif0], saif0_lookups, ARRAY_SIZE(saif0_lookups));
+ clk_register_clkdevs(clks[saif1], saif1_lookups, ARRAY_SIZE(saif1_lookups));
+ clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups));
+ clk_register_clkdevs(clks[fec], fec_lookups, ARRAY_SIZE(fec_lookups));
+ clk_register_clkdevs(clks[can0], can0_lookups, ARRAY_SIZE(can0_lookups));
+ clk_register_clkdevs(clks[can1], can1_lookups, ARRAY_SIZE(can1_lookups));
+
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clks[clks_init_on[i]]);
+
+ mxs_timer_init(NULL, MX28_INT_TIMER0);
+
+ return 0;
+}
--
1.7.5.4
More information about the linux-arm-kernel
mailing list