[PATCH 02/17] ARM: at91: use machine specific hook for late init

[Jean-Christophe PLAGNIOL-VILLARD]

On 23:38 Thu 26 Apr     , Shawn Guo wrote:
> Cc: Andrew Victor <linux at maxim.org.za>
> Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
> Cc: Jean-Christophe Plagniol-Villard <plagnioj at jcrosoft.com>
> Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> ---
>  arch/arm/mach-at91/board-1arm.c         |    1 +
>  arch/arm/mach-at91/board-afeb-9260v1.c  |    1 +
>  arch/arm/mach-at91/board-cam60.c        |    1 +
>  arch/arm/mach-at91/board-carmeva.c      |    1 +
>  arch/arm/mach-at91/board-cpu9krea.c     |    1 +
>  arch/arm/mach-at91/board-cpuat91.c      |    1 +
>  arch/arm/mach-at91/board-csb337.c       |    1 +
>  arch/arm/mach-at91/board-csb637.c       |    1 +
>  arch/arm/mach-at91/board-dt.c           |    1 +
>  arch/arm/mach-at91/board-eb01.c         |    1 +
>  arch/arm/mach-at91/board-eb9200.c       |    1 +
>  arch/arm/mach-at91/board-ecbat91.c      |    1 +
>  arch/arm/mach-at91/board-eco920.c       |    1 +
>  arch/arm/mach-at91/board-flexibity.c    |    1 +
>  arch/arm/mach-at91/board-foxg20.c       |    1 +
>  arch/arm/mach-at91/board-gsia18s.c      |    1 +
>  arch/arm/mach-at91/board-kafa.c         |    1 +
>  arch/arm/mach-at91/board-kb9202.c       |    1 +
>  arch/arm/mach-at91/board-neocore926.c   |    1 +
>  arch/arm/mach-at91/board-pcontrol-g20.c |    1 +
>  arch/arm/mach-at91/board-picotux200.c   |    1 +
>  arch/arm/mach-at91/board-qil-a9260.c    |    1 +
>  arch/arm/mach-at91/board-rm9200dk.c     |    1 +
>  arch/arm/mach-at91/board-rm9200ek.c     |    1 +
>  arch/arm/mach-at91/board-rsi-ews.c      |    1 +
>  arch/arm/mach-at91/board-sam9-l9260.c   |    1 +
>  arch/arm/mach-at91/board-sam9260ek.c    |    1 +
>  arch/arm/mach-at91/board-sam9261ek.c    |    1 +
>  arch/arm/mach-at91/board-sam9263ek.c    |    1 +
>  arch/arm/mach-at91/board-sam9g20ek.c    |    1 +
>  arch/arm/mach-at91/board-sam9m10g45ek.c |    1 +
>  arch/arm/mach-at91/board-sam9rlek.c     |    1 +
>  arch/arm/mach-at91/board-snapper9260.c  |    1 +
>  arch/arm/mach-at91/board-stamp9g20.c    |    1 +
>  arch/arm/mach-at91/board-usb-a926x.c    |    1 +
>  arch/arm/mach-at91/board-yl-9200.c      |    1 +
>  arch/arm/mach-at91/clock.c              |    3 +--
>  arch/arm/mach-at91/generic.h            |    5 +++++
>  arch/arm/mach-at91/setup.c              |    5 +++++
I like it but I think it's more time to put soc init that machine init

Best Regards,
J.