[PATCH 06/33] ARM: S3C24XX: dev-uart: Use common macro to define resources
Heiko Stübner
heiko at sntech.de
Wed Apr 25 05:13:26 EDT 2012
Am Mittwoch, 25. April 2012, 06:12:16 schrieb Tushar Behera:
> CC: Ben Dooks <ben-linux at fluff.org>
> CC: Kukjin Kim <kgene.kim at samsung.com>
> Signed-off-by: Tushar Behera <tushar.behera at linaro.org>
Acked-by: Heiko Stuebner <heiko at sntech.de>
> ---
> arch/arm/plat-s3c24xx/dev-uart.c | 56
> +++++++++++--------------------------- 1 files changed, 16 insertions(+),
> 40 deletions(-)
>
> diff --git a/arch/arm/plat-s3c24xx/dev-uart.c
> b/arch/arm/plat-s3c24xx/dev-uart.c index 9ab22e6..d779216 100644
> --- a/arch/arm/plat-s3c24xx/dev-uart.c
> +++ b/arch/arm/plat-s3c24xx/dev-uart.c
> @@ -29,55 +29,31 @@
> /* Serial port registrations */
>
> static struct resource s3c2410_uart0_resource[] = {
> - [0] = {
> - .start = S3C2410_PA_UART0,
> - .end = S3C2410_PA_UART0 + 0x3fff,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = IRQ_S3CUART_RX0,
> - .end = IRQ_S3CUART_ERR0,
> - .flags = IORESOURCE_IRQ,
> - }
> + [0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K),
> + [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \
> + IRQ_S3CUART_ERR0 - IRQ_S3CUART_RX0 + 1, \
> + NULL, IORESOURCE_IRQ)
> };
>
> static struct resource s3c2410_uart1_resource[] = {
> - [0] = {
> - .start = S3C2410_PA_UART1,
> - .end = S3C2410_PA_UART1 + 0x3fff,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = IRQ_S3CUART_RX1,
> - .end = IRQ_S3CUART_ERR1,
> - .flags = IORESOURCE_IRQ,
> - }
> + [0] = DEFINE_RES_MEM(S3C2410_PA_UART1, SZ_16K),
> + [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX1, \
> + IRQ_S3CUART_ERR1 - IRQ_S3CUART_RX1 + 1, \
> + NULL, IORESOURCE_IRQ)
> };
>
> static struct resource s3c2410_uart2_resource[] = {
> - [0] = {
> - .start = S3C2410_PA_UART2,
> - .end = S3C2410_PA_UART2 + 0x3fff,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = IRQ_S3CUART_RX2,
> - .end = IRQ_S3CUART_ERR2,
> - .flags = IORESOURCE_IRQ,
> - }
> + [0] = DEFINE_RES_MEM(S3C2410_PA_UART2, SZ_16K),
> + [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX2, \
> + IRQ_S3CUART_ERR2 - IRQ_S3CUART_RX2 + 1, \
> + NULL, IORESOURCE_IRQ)
> };
>
> static struct resource s3c2410_uart3_resource[] = {
> - [0] = {
> - .start = S3C2443_PA_UART3,
> - .end = S3C2443_PA_UART3 + 0x3fff,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = IRQ_S3CUART_RX3,
> - .end = IRQ_S3CUART_ERR3,
> - .flags = IORESOURCE_IRQ,
> - },
> + [0] = DEFINE_RES_MEM(S3C2443_PA_UART3, SZ_16K),
> + [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX3, \
> + IRQ_S3CUART_ERR3 - IRQ_S3CUART_RX3 + 1, \
> + NULL, IORESOURCE_IRQ)
> };
>
> struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
More information about the linux-arm-kernel
mailing list