[PATCH v2 3/3] ARM: imx6q: switch to use pinctrl driver

[Dong Aisheng]

On Tue, Apr 24, 2012 at 11:08:41AM +0200, Wolfram Sang wrote:
> On Tue, Apr 24, 2012 at 10:56:43AM +0200, Linus Walleij wrote:
> > On Fri, Apr 20, 2012 at 4:58 PM, Dong Aisheng <b29396 at freescale.com> wrote:
> > 
> > > From: Dong Aisheng <dong.aisheng at linaro.org>
> > >
> > > Signed-off-by: Dong Aisheng <dong.aisheng at linaro.org>
> > >
> > > ---
> > > This is not a formal patch and is only used for test
> > > since before the pinctrl core handle dummy state is in,
> > > enable pinctrl in driver will break other platforms.
> > >
> > > ChangeLog v1->v2:
> > > * using updated binding
> > > ---
> > >  arch/arm/boot/dts/imx6q-arm2.dts   |    2 ++
> > >  arch/arm/boot/dts/imx6q.dtsi       |   17 +++++++++++++++++
> > >  arch/arm/mach-imx/Kconfig          |    2 ++
> > >  drivers/mmc/host/sdhci-esdhc-imx.c |   12 ++++++++++++
> > >  4 files changed, 33 insertions(+), 0 deletions(-)
> > 
> > Since this touches the MMC driver I'd like an ACK from the
> > maintainer, but no maintainer is set for this subdriver, still
> > it feels like Sascha and/or Wolfram should be involved.
> 
> Can we have a more descriptive name for the pinctrl member?
> 
Sure, i will update it.

Thanks

Regards
Dong Aisheng