[PATCH V2] watchdog: mpcore: Add DT probing support for ARM mpcore watchdog

[viresh kumar]

On 4/23/12, Marc Zyngier <marc.zyngier at arm.com> wrote:
> On 23/04/12 15:21, viresh kumar wrote:
>> On 4/23/12, Marc Zyngier <marc.zyngier at arm.com> wrote:
>>> Ah, that explains why it worked. I suppose you do have additional
>>> patches that fix the IRQ request bit?
>>
>> Missed this earlier. That patchset is in review currently and have
>> already fixed that. :)
>
> Right. Please post that patch as a prerequisite for any other change.

Haah!! I misread your question. I don't know how, but i thought you are
asking me to fix this address for SPEAr (My SoC). And that patch set
is currently in review.

I didn't get this IRQ request bit thing? Can you please explain.

>>> Given that no in-tree platform seem to be using this watchdog (at least
>>> a quick grep didn't reveal anything), I'd be inclined to simply change
>>> the offset in smp_twd.h and let them break.
>>
>> Even i can't find any users of it. :)
>>
>> @Wim: Please apply following patch before this one.
>
> Probably it would be better to keep everything in a single series,
> including the above IRQ fixes. It would surely make things easier for
> the maintainer and other people who are reviewing the changes you're
> making to the driver.

Even i would like to keep related patches in a single set. But i am doubtful
about this IRQ thing.

>> Here we go:
>>
>> From: Viresh Kumar <viresh.kumar at st.com>
>> Date: Mon, 23 Apr 2012 19:39:47 +0530
>> Subject: [PATCH] ARM: SMP_TWD: WDOG: Start registers from 0x00 instead of
>>  0x20
>>
>> TWD_WDOG is at offset 0x20 from TWD base address. Current register
>> offsets
>> contain this extra 0x20 offset, i.e. users were required to pass base
>> address of
>> TWD instead of WDOG to WDOG driver.
>>
>> Change this, so that users can pass base address of WDOG to WDOG driver
>> instead
>> of TWD module. For this, subtract 0x20 from offsets of WDOG registers.
>>
>> This could break any current users of TWD_WDOG, but i couldn't find any
>> users of
>> this driver in current Linux tree. So, haven't fixed any platform code. If
>> some
>> platforms are broken please report to me, so that we can get them fixed in
>> this
>> patch only.
>>
>> Signed-off-by: Viresh Kumar <viresh.kumar at st.com>
>> ---
>>  arch/arm/include/asm/smp_twd.h |   17 +++++++++++------
>>  1 files changed, 11 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/arm/include/asm/smp_twd.h
>> b/arch/arm/include/asm/smp_twd.h
>> index 57857d1..ff3f67e 100644
>> --- a/arch/arm/include/asm/smp_twd.h
>> +++ b/arch/arm/include/asm/smp_twd.h
>> @@ -6,12 +6,17 @@
>>  #define TWD_TIMER_CONTROL		0x08
>>  #define TWD_TIMER_INTSTAT		0x0C
>>
>> -#define TWD_WDOG_LOAD			0x20
>> -#define TWD_WDOG_COUNTER		0x24
>> -#define TWD_WDOG_CONTROL		0x28
>> -#define TWD_WDOG_INTSTAT		0x2C
>> -#define TWD_WDOG_RESETSTAT		0x30
>> -#define TWD_WDOG_DISABLE		0x34
>> +/*
>> + * TWD_WDOG is at offset 0x20 from TWD base address. Following register
>> offsets
>> + * doesn't contain this extra 0x20 offset, i.e. users of TWD_WDOG
>> must pass base
>> + * address of WDOG to WDOG driver instead of TWD module.
>> + */
>> +#define TWD_WDOG_LOAD			0x00
>> +#define TWD_WDOG_COUNTER		0x04
>> +#define TWD_WDOG_CONTROL		0x08
>> +#define TWD_WDOG_INTSTAT		0x0C
>> +#define TWD_WDOG_RESETSTAT		0x10
>> +#define TWD_WDOG_DISABLE		0x14
>>
>>  #define TWD_WDOG_LOAD_MIN		0x00000000
>>  #define TWD_WDOG_LOAD_MAX		0xFFFFFFFF
>>
>
> Now that we made it that far, why not moving the TWD_WDOG_* #defines to
> the driver itself? Nobody else should care about it anyway...

I thought of it too, but then left it. I thought this is done purposefully.
Will move it once i get your concern on IRQ stuff.

--
viresh