[RFC PATCH 00/11 V4] MXS: Add i.MX28 USB Host driver

[Marek Vasut]

Dear Chen Peter-B29397,

> > This patchset introduces the USB Host driver for i.MX28 CPU, utilising
> > the
> > generic USB PHY infrastructure. Also added is glue code for CI13xxx
> > driver, to
> > allow device mode. This patchset still does NOT support OTG mode, the
> > device/host mode is selected via platform data.
> 
> Does the udc work at this patchset? If it is, you have enabled OTG port
> and not host 1 port, correct?

Wait for V5. Gadget mode should work, V5 should have some further rebase issues 
fixed.

> 
> > V2: Introduce stub imx-usb driver that then registers the PHY and EHCI
> > drivers.
> > V3: Add the HCD on demand based on the PHY's state (only add HCD if it's
> > host).
> > 
> >     Currently, only the HOST mode is supported.
> > 
> > V4: * Introduce ci13xxx gadget glue
> > 
> >     * Reorder patches in a more sensible order
> >     * Introduce platform data, containing VBUS GPIO and port mode
> > 
> > (device/gadget)
> > 
> >     * Rename imx-usb to imx-otg
> >     * Drop mx28evk usb host patch
> >     * Use more devm_ function
> >     * Rework the mxs-phy to register the same interrupt as ehci-mxs (and
> >     
> >       effectivelly kill bogus otg_set_vbus() call from ehci-mxs ; use
> > 
> > standard
> > 
> >       ehci irq handling in ehci-mxs)
> > 
> > Marek Vasut (11):
> >   MXS: Make clk_disable return integer
> >   MXS: Add USB EHCI and USB PHY clock handling
> >   MXS: Fixup i.MX233 USB base address name
> >   MXS: Add data shared between imx-otg and EHCI driver
> >   MXS: Modify the ci13xxx_udc to avoid adding UDC
> >   MXS: Add small registration glue for ci13xxx_udc
> >   MXS: Add separate MXS EHCI HCD driver
> >   MXS: Add imx-otg driver
> >   MXS: Add USB PHY driver
> >   MXS: Add platform registration hooks for USB EHCI
> >   MXS: Enable USB on M28EVK
> >  
> >  arch/arm/mach-mxs/Kconfig                       |    2 +
> >  arch/arm/mach-mxs/clock-mx28.c                  |   28 +-
> >  arch/arm/mach-mxs/devices-mx28.h                |    5 +
> >  arch/arm/mach-mxs/devices/Kconfig               |    3 +
> >  arch/arm/mach-mxs/devices/Makefile              |    1 +
> >  arch/arm/mach-mxs/devices/platform-usb.c        |   84 +++++
> >  arch/arm/mach-mxs/include/mach/clock.h          |    2 +-
> >  arch/arm/mach-mxs/include/mach/devices-common.h |   12 +
> >  arch/arm/mach-mxs/include/mach/mx23.h           |    8 +-
> >  arch/arm/mach-mxs/mach-m28evk.c                 |   20 ++
> >  drivers/usb/gadget/Kconfig                      |   17 +
> >  drivers/usb/gadget/Makefile                     |    1 +
> >  drivers/usb/gadget/ci13xxx_mxs.c                |   67 ++++
> >  drivers/usb/gadget/ci13xxx_udc.c                |   12 +-
> >  drivers/usb/gadget/ci13xxx_udc.h                |    1 +
> >  drivers/usb/host/Kconfig                        |    7 +
> >  drivers/usb/host/ehci-hcd.c                     |    5 +
> >  drivers/usb/host/ehci-mxs.c                     |  197 ++++++++++
> >  drivers/usb/otg/Kconfig                         |   16 +
> >  drivers/usb/otg/Makefile                        |    2 +
> >  drivers/usb/otg/imx-otg.c                       |  282 +++++++++++++++
> >  drivers/usb/otg/mxs-phy.c                       |  438
> > 
> > +++++++++++++++++++++++
> > 
> >  include/linux/fsl/mxs-usb.h                     |   46 +++
> >  23 files changed, 1243 insertions(+), 13 deletions(-)
> >  create mode 100644 arch/arm/mach-mxs/devices/platform-usb.c
> >  create mode 100644 drivers/usb/gadget/ci13xxx_mxs.c
> >  create mode 100644 drivers/usb/host/ehci-mxs.c
> >  create mode 100644 drivers/usb/otg/imx-otg.c
> >  create mode 100644 drivers/usb/otg/mxs-phy.c
> >  create mode 100644 include/linux/fsl/mxs-usb.h
> > 
> > Cc: Chen Peter-B29397 <B29397 at freescale.com>
> > Cc: Detlev Zundel <dzu at denx.de>
> > Cc: Fabio Estevam <festevam at gmail.com>
> > Cc: Li Frank-B20596 <B20596 at freescale.com>
> > Cc: Lin Tony-B19295 <B19295 at freescale.com>
> > Cc: Linux USB <linux-usb at vger.kernel.org>
> > Cc: Sascha Hauer <s.hauer at pengutronix.de>
> > Cc: Shawn Guo <shawn.guo at freescale.com>
> > Cc: Shawn Guo <shawn.guo at linaro.org>
> > Cc: Stefano Babic <sbabic at denx.de>
> > Cc: Subodh Nijsure <snijsure at grid-net.com>
> > Cc: Tony Lin <tony.lin at freescale.com>
> > Cc: Wolfgang Denk <wd at denx.de>
> > 
> > NOTE: Adding this ci13xxx-mxs driver was really helpful, it helped me to
> > realise
> > 
> >       how this whole monster should look like in the end. Now the mxs-phy
> > 
> > is
> > 
> >       also much more prepared for the OTG operation.
> > 
> > --
> > 1.7.9.5

Best regards,
Marek Vasut