[PATCH 04/17] ARM clps711x: Using a single definition for virtual address register

[Alexander Shiyan]

Using a single definition for the virtual address register for all
variants boards clps711x.

Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
---
 arch/arm/include/asm/hardware/ep7211.h         |    5 -----
 arch/arm/include/asm/hardware/ep7212.h         |    9 ++-------
 arch/arm/mach-clps711x/include/mach/hardware.h |   10 ----------
 drivers/mtd/nand/autcpu12.c                    |    4 ++--
 4 files changed, 4 insertions(+), 24 deletions(-)

diff --git a/arch/arm/include/asm/hardware/ep7211.h b/arch/arm/include/asm/hardware/ep7211.h
index 654d5f6..ca4d198 100644
--- a/arch/arm/include/asm/hardware/ep7211.h
+++ b/arch/arm/include/asm/hardware/ep7211.h
@@ -25,11 +25,6 @@
 
 #include <asm/hardware/clps7111.h>
 
-/*
- * define EP7211_BASE to be the base address of the region
- * you want to access.
- */
-
 #define EP7211_PHYS_BASE	(0x80000000)
 
 /*
diff --git a/arch/arm/include/asm/hardware/ep7212.h b/arch/arm/include/asm/hardware/ep7212.h
index 3b43bbe..0b1f508 100644
--- a/arch/arm/include/asm/hardware/ep7212.h
+++ b/arch/arm/include/asm/hardware/ep7212.h
@@ -23,16 +23,11 @@
 #ifndef __ASM_HARDWARE_EP7212_H
 #define __ASM_HARDWARE_EP7212_H
 
-/*
- * define EP7212_BASE to be the base address of the region
- * you want to access.
- */
-
 #define EP7212_PHYS_BASE	(0x80000000)
 
 #ifndef __ASSEMBLY__
-#define ep_readl(off)		__raw_readl(EP7212_BASE + (off))
-#define ep_writel(val,off)	__raw_writel(val, EP7212_BASE + (off))
+#define ep_readl(off)		__raw_readl(CLPS7111_BASE + (off))
+#define ep_writel(val,off)	__raw_writel(val, CLPS7111_BASE + (off))
 #endif
 
 /*
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index 2ff3473..8c7b28e 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -54,14 +54,10 @@
 
 #if defined (CONFIG_SOC_EP7211)
 
-#define EP7211_VIRT_BASE	CLPS7111_VIRT_BASE
-#define EP7211_BASE		CLPS7111_VIRT_BASE
 #include <asm/hardware/ep7211.h>
 
 #elif defined (CONFIG_SOC_EP7212)
 
-#define EP7212_VIRT_BASE	CLPS7111_VIRT_BASE
-#define EP7212_BASE		CLPS7111_VIRT_BASE
 #include <asm/hardware/ep7212.h>
 
 #elif defined (CONFIG_SOC_EP7213)
@@ -75,9 +71,6 @@
 
 #if  defined (CONFIG_ARCH_AUTCPU12)
 
-#define  CS89712_VIRT_BASE	CLPS7111_VIRT_BASE
-#define  CS89712_BASE		CLPS7111_VIRT_BASE
-
 #include <asm/hardware/clps7111.h>
 #include <asm/hardware/ep7212.h>
 #include <asm/hardware/cs89712.h>
@@ -158,9 +151,6 @@
 
 #if defined (CONFIG_ARCH_CEIVA)
 
-#define  CEIVA_VIRT_BASE	CLPS7111_VIRT_BASE
-#define  CEIVA_BASE		CLPS7111_VIRT_BASE
-
 #include <asm/hardware/clps7111.h>
 #include <asm/hardware/ep7212.h>
 
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index 2e42ec2..5bd4107 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -102,7 +102,7 @@ static void autcpu12_hwcontrol(struct mtd_info *mtd, int cmd,
 		void __iomem *addr;
 		unsigned char bits;
 
-		addr = CS89712_VIRT_BASE + AUTCPU12_SMC_PORT_OFFSET;
+		addr = CLPS7111_VIRT_BASE + AUTCPU12_SMC_PORT_OFFSET;
 		bits = (ctrl & NAND_CLE) << 4;
 		bits |= (ctrl & NAND_ALE) << 2;
 		writeb((readb(addr) & ~0x30) | bits, addr);
@@ -120,7 +120,7 @@ static void autcpu12_hwcontrol(struct mtd_info *mtd, int cmd,
  */
 int autcpu12_device_ready(struct mtd_info *mtd)
 {
-	void __iomem *addr = CS89712_VIRT_BASE + AUTCPU12_SMC_PORT_OFFSET;
+	void __iomem *addr = CLPS7111_VIRT_BASE + AUTCPU12_SMC_PORT_OFFSET;
 
 	return readb(addr) & AUTCPU12_SMC_RDY;
 }
-- 
1.7.3.4