[PATCH 6/9] SPEAr13xx: Add dts and dtsi files
Viresh Kumar
viresh.linux at gmail.com
Fri Apr 20 13:22:46 EDT 2012
This patch adds machines/boards dts{i} files for SPEAr1310 and SPEAr1340. Both
are based on ARM, Cortex A9 processor family.
Signed-off-by: Viresh Kumar <viresh.kumar at st.com>
---
arch/arm/boot/dts/spear1310-evb.dts | 267 ++++++++++++++++++++++++++++++++
arch/arm/boot/dts/spear1310.dtsi | 184 ++++++++++++++++++++++
arch/arm/boot/dts/spear1340-evb.dts | 291 +++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/spear1340.dtsi | 56 +++++++
arch/arm/boot/dts/spear13xx.dtsi | 258 +++++++++++++++++++++++++++++++
5 files changed, 1056 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/spear1310-evb.dts
create mode 100644 arch/arm/boot/dts/spear1310.dtsi
create mode 100644 arch/arm/boot/dts/spear1340-evb.dts
create mode 100644 arch/arm/boot/dts/spear1340.dtsi
create mode 100644 arch/arm/boot/dts/spear13xx.dtsi
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
new file mode 100644
index 0000000..1ffc46c
--- /dev/null
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -0,0 +1,267 @@
+/*
+ * DTS file for SPEAr1310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar at st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1310.dtsi"
+
+/ {
+ model = "ST SPEAr1310 Evaluation Board";
+ compatible = "st,spear1310-evb", "st,spear1310";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ ahb {
+ pinmux at e0700000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ i2c0-pmx {
+ st,pins = "i2c0_grp";
+ st,function = "i2c0";
+ };
+ i2s1 {
+ st,pins = "i2s1_grp";
+ st,function = "i2s1";
+ };
+ gpio {
+ st,pins = "arm_gpio_grp";
+ st,function = "arm_gpio";
+ };
+ eth {
+ st,pins = "gmii_grp";
+ st,function = "gmii";
+ };
+ ssp0 {
+ st,pins = "ssp0_grp";
+ st,function = "ssp0";
+ };
+ kbd {
+ st,pins = "keyboard_6x6_grp";
+ st,function = "keyboard";
+ };
+ sdhci {
+ st,pins = "sdhci_grp";
+ st,function = "sdhci";
+ };
+ smi-pmx {
+ st,pins = "smi_2_chips_grp";
+ st,function = "smi";
+ };
+ uart0 {
+ st,pins = "uart0_grp";
+ st,function = "uart0";
+ };
+ rs485 {
+ st,pins = "rs485_0_1_tdm_0_1_grp";
+ st,function = "rs485_0_1_tdm_0_1";
+ };
+ i2c1_2 {
+ st,pins = "i2c_1_2_grp";
+ st,function = "i2c_1_2";
+ };
+ pci {
+ st,pins = "pcie0_grp","pcie1_grp",
+ "pcie2_grp";
+ st,function = "pci";
+ };
+ smii {
+ st,pins = "smii_0_1_2_grp";
+ st,function = "smii_0_1_2";
+ };
+ nand {
+ st,pins = "nand_8bit_grp",
+ "nand_16bit_grp";
+ st,function = "nand";
+ };
+ };
+ };
+
+ ahci at b1000000 {
+ status = "okay";
+ };
+
+ cf at b2800000 {
+ status = "okay";
+ };
+
+ dma at ea800000 {
+ status = "okay";
+ };
+
+ dma at eb000000 {
+ status = "okay";
+ };
+
+ fsmc: flash at b0000000 {
+ status = "okay";
+ };
+
+ gmac0: eth at e2000000 {
+ status = "okay";
+ };
+
+ sdhci at b3000000 {
+ status = "okay";
+ };
+
+ smi: flash at ea000000 {
+ status = "okay";
+ };
+
+ spi0: spi at e0100000 {
+ status = "okay";
+ };
+
+ ehci at e4800000 {
+ status = "okay";
+ };
+
+ ehci at e5800000 {
+ status = "okay";
+ };
+
+ ohci at e4000000 {
+ status = "okay";
+ };
+
+ ohci at e5000000 {
+ status = "okay";
+ };
+
+ apb {
+ adc at e0080000 {
+ status = "okay";
+ };
+
+ gpio0: gpio at e0600000 {
+ status = "okay";
+ };
+
+ gpio1: gpio at e0680000 {
+ status = "okay";
+ };
+
+ i2c0: i2c at e0280000 {
+ status = "okay";
+ };
+
+ i2c1: i2c at 5cd00000 {
+ status = "okay";
+ };
+
+ kbd at e0300000 {
+ linux,keymap = < 0x00000001
+ 0x00010002
+ 0x00020003
+ 0x00030004
+ 0x00040005
+ 0x00050006
+ 0x00060007
+ 0x00070008
+ 0x00080009
+ 0x0100000a
+ 0x0101000c
+ 0x0102000d
+ 0x0103000e
+ 0x0104000f
+ 0x01050010
+ 0x01060011
+ 0x01070012
+ 0x01080013
+ 0x02000014
+ 0x02010015
+ 0x02020016
+ 0x02030017
+ 0x02040018
+ 0x02050019
+ 0x0206001a
+ 0x0207001b
+ 0x0208001c
+ 0x0300001d
+ 0x0301001e
+ 0x0302001f
+ 0x03030020
+ 0x03040021
+ 0x03050022
+ 0x03060023
+ 0x03070024
+ 0x03080025
+ 0x04000026
+ 0x04010027
+ 0x04020028
+ 0x04030029
+ 0x0404002a
+ 0x0405002b
+ 0x0406002c
+ 0x0407002d
+ 0x0408002e
+ 0x0500002f
+ 0x05010030
+ 0x05020031
+ 0x05030032
+ 0x05040033
+ 0x05050034
+ 0x05060035
+ 0x05070036
+ 0x05080037
+ 0x06000038
+ 0x06010039
+ 0x0602003a
+ 0x0603003b
+ 0x0604003c
+ 0x0605003d
+ 0x0606003e
+ 0x0607003f
+ 0x06080040
+ 0x07000041
+ 0x07010042
+ 0x07020043
+ 0x07030044
+ 0x07040045
+ 0x07050046
+ 0x07060047
+ 0x07070048
+ 0x07080049
+ 0x0800004a
+ 0x0801004b
+ 0x0802004c
+ 0x0803004d
+ 0x0804004e
+ 0x0805004f
+ 0x08060050
+ 0x08070051
+ 0x08080052 >;
+ autorepeat;
+ st,mode = <0>;
+ status = "okay";
+ };
+
+ rtc at e0580000 {
+ status = "okay";
+ };
+
+ serial at e0000000 {
+ status = "okay";
+ };
+
+ wdt at ec800620 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
new file mode 100644
index 0000000..9e61da4
--- /dev/null
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -0,0 +1,184 @@
+/*
+ * DTS file for all SPEAr1310 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar at st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+ compatible = "st,spear1310";
+
+ ahb {
+ ahci at b1000000 {
+ compatible = "snps,spear-ahci";
+ reg = <0xb1000000 0x10000>;
+ interrupts = <0 68 0x4>;
+ status = "disabled";
+ };
+
+ ahci at b1800000 {
+ compatible = "snps,spear-ahci";
+ reg = <0xb1800000 0x10000>;
+ interrupts = <0 69 0x4>;
+ status = "disabled";
+ };
+
+ ahci at b4000000 {
+ compatible = "snps,spear-ahci";
+ reg = <0xb4000000 0x10000>;
+ interrupts = <0 70 0x4>;
+ status = "disabled";
+ };
+
+ gmac1: eth at 5c400000 {
+ compatible = "st,spear600-gmac";
+ reg = <0x5c400000 0x8000>;
+ interrupts = <0 95 0x4>;
+ interrupt-names = "macirq";
+ status = "disabled";
+ };
+
+ gmac2: eth at 5c500000 {
+ compatible = "st,spear600-gmac";
+ reg = <0x5c500000 0x8000>;
+ interrupts = <0 96 0x4>;
+ interrupt-names = "macirq";
+ status = "disabled";
+ };
+
+ gmac3: eth at 5c600000 {
+ compatible = "st,spear600-gmac";
+ reg = <0x5c600000 0x8000>;
+ interrupts = <0 97 0x4>;
+ interrupt-names = "macirq";
+ status = "disabled";
+ };
+
+ gmac4: eth at 5c700000 {
+ compatible = "st,spear600-gmac";
+ reg = <0x5c700000 0x8000>;
+ interrupts = <0 98 0x4>;
+ interrupt-names = "macirq";
+ status = "disabled";
+ };
+
+ spi1: spi at 5d400000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x5d400000 0x1000>;
+ interrupts = <0 99 0x4>;
+ status = "disabled";
+ };
+
+ apb {
+ i2c1: i2c at 5cd00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5cd00000 0x1000>;
+ interrupts = <0 87 0x4>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at 5ce00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5ce00000 0x1000>;
+ interrupts = <0 88 0x4>;
+ status = "disabled";
+ };
+
+ i2c3: i2c at 5cf00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5cf00000 0x1000>;
+ interrupts = <0 89 0x4>;
+ status = "disabled";
+ };
+
+ i2c4: i2c at 5d000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5d000000 0x1000>;
+ interrupts = <0 90 0x4>;
+ status = "disabled";
+ };
+
+ i2c5: i2c at 5d100000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5d100000 0x1000>;
+ interrupts = <0 91 0x4>;
+ status = "disabled";
+ };
+
+ i2c6: i2c at 5d200000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5d200000 0x1000>;
+ interrupts = <0 92 0x4>;
+ status = "disabled";
+ };
+
+ i2c7: i2c at 5d300000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5d300000 0x1000>;
+ interrupts = <0 93 0x4>;
+ status = "disabled";
+ };
+
+ serial at 5c800000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x5c800000 0x1000>;
+ interrupts = <0 82 0x4>;
+ status = "disabled";
+ };
+
+ serial at 5c900000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x5c900000 0x1000>;
+ interrupts = <0 83 0x4>;
+ status = "disabled";
+ };
+
+ serial at 5ca00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x5ca00000 0x1000>;
+ interrupts = <0 84 0x4>;
+ status = "disabled";
+ };
+
+ serial at 5cb00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x5cb00000 0x1000>;
+ interrupts = <0 85 0x4>;
+ status = "disabled";
+ };
+
+ serial at 5cc00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x5cc00000 0x1000>;
+ interrupts = <0 86 0x4>;
+ status = "disabled";
+ };
+
+ thermal at e07008c4 {
+ st,thermal-flags = <0x7000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
new file mode 100644
index 0000000..5621df3
--- /dev/null
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -0,0 +1,291 @@
+/*
+ * DTS file for SPEAr1340 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar at st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1340.dtsi"
+
+/ {
+ model = "ST SPEAr1340 Evaluation Board";
+ compatible = "st,spear1340-evb", "st,spear1340";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ ahb {
+ pinmux at e0700000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ pads_as_gpio {
+ st,pins = "pads_as_gpio_grp";
+ st,function = "pads_as_gpio";
+ };
+ fsmc {
+ st,pins = "fsmc_8bit_grp";
+ st,function = "fsmc";
+ };
+ kbd {
+ st,pins = "keyboard_row_col_grp",
+ "keyboard_col5_grp";
+ st,function = "keyboard";
+ };
+ uart0 {
+ st,pins = "uart0_grp", "uart0_enh_grp";
+ st,function = "uart0";
+ };
+ i2c0-pmx {
+ st,pins = "i2c0_grp";
+ st,function = "i2c0";
+ };
+ i2c1-pmx {
+ st,pins = "i2c1_grp";
+ st,function = "i2c1";
+ };
+ spdif-in {
+ st,pins = "spdif_in_grp";
+ st,function = "spdif_in";
+ };
+ spdif-out {
+ st,pins = "spdif_out_grp";
+ st,function = "spdif_out";
+ };
+ ssp0 {
+ st,pins = "ssp0_grp", "ssp0_cs1_grp",
+ "ssp0_cs3_grp";
+ st,function = "ssp0";
+ };
+ pwm {
+ st,pins = "pwm2_grp", "pwm3_grp";
+ st,function = "pwm";
+ };
+ smi-pmx {
+ st,pins = "smi_grp";
+ st,function = "smi";
+ };
+ i2s {
+ st,pins = "i2s_in_grp", "i2s_out_grp";
+ st,function = "i2s";
+ };
+ gmac {
+ st,pins = "gmii_grp", "rgmii_grp";
+ st,function = "gmac";
+ };
+ cam3 {
+ st,pins = "cam3_grp";
+ st,function = "cam3";
+ };
+ cec0 {
+ st,pins = "cec0_grp";
+ st,function = "cec0";
+ };
+ cec1 {
+ st,pins = "cec1_grp";
+ st,function = "cec1";
+ };
+ sdhci {
+ st,pins = "sdhci_grp";
+ st,function = "sdhci";
+ };
+ clcd {
+ st,pins = "clcd_grp";
+ st,function = "clcd";
+ };
+ sata {
+ st,pins = "sata_grp";
+ st,function = "sata";
+ };
+ };
+ };
+
+ ahci at b1000000 {
+ status = "okay";
+ };
+
+ cf at b2800000 {
+ status = "okay";
+ };
+
+ dma at ea800000 {
+ status = "okay";
+ };
+
+ dma at eb000000 {
+ status = "okay";
+ };
+
+ fsmc: flash at b0000000 {
+ status = "okay";
+ };
+
+ gmac0: eth at e2000000 {
+ status = "okay";
+ };
+
+ sdhci at b3000000 {
+ status = "okay";
+ };
+
+ smi: flash at ea000000 {
+ status = "okay";
+ };
+
+ spi0: spi at e0100000 {
+ status = "okay";
+ };
+
+ ehci at e4800000 {
+ status = "okay";
+ };
+
+ ehci at e5800000 {
+ status = "okay";
+ };
+
+ ohci at e4000000 {
+ status = "okay";
+ };
+
+ ohci at e5000000 {
+ status = "okay";
+ };
+
+ apb {
+ adc at e0080000 {
+ status = "okay";
+ };
+
+ gpio0: gpio at e0600000 {
+ status = "okay";
+ };
+
+ gpio1: gpio at e0680000 {
+ status = "okay";
+ };
+
+ i2c0: i2c at e0280000 {
+ status = "okay";
+ };
+
+ i2c1: i2c at b4000000 {
+ status = "okay";
+ };
+
+ kbd at e0300000 {
+ linux,keymap = < 0x00000001
+ 0x00010002
+ 0x00020003
+ 0x00030004
+ 0x00040005
+ 0x00050006
+ 0x00060007
+ 0x00070008
+ 0x00080009
+ 0x0100000a
+ 0x0101000c
+ 0x0102000d
+ 0x0103000e
+ 0x0104000f
+ 0x01050010
+ 0x01060011
+ 0x01070012
+ 0x01080013
+ 0x02000014
+ 0x02010015
+ 0x02020016
+ 0x02030017
+ 0x02040018
+ 0x02050019
+ 0x0206001a
+ 0x0207001b
+ 0x0208001c
+ 0x0300001d
+ 0x0301001e
+ 0x0302001f
+ 0x03030020
+ 0x03040021
+ 0x03050022
+ 0x03060023
+ 0x03070024
+ 0x03080025
+ 0x04000026
+ 0x04010027
+ 0x04020028
+ 0x04030029
+ 0x0404002a
+ 0x0405002b
+ 0x0406002c
+ 0x0407002d
+ 0x0408002e
+ 0x0500002f
+ 0x05010030
+ 0x05020031
+ 0x05030032
+ 0x05040033
+ 0x05050034
+ 0x05060035
+ 0x05070036
+ 0x05080037
+ 0x06000038
+ 0x06010039
+ 0x0602003a
+ 0x0603003b
+ 0x0604003c
+ 0x0605003d
+ 0x0606003e
+ 0x0607003f
+ 0x06080040
+ 0x07000041
+ 0x07010042
+ 0x07020043
+ 0x07030044
+ 0x07040045
+ 0x07050046
+ 0x07060047
+ 0x07070048
+ 0x07080049
+ 0x0800004a
+ 0x0801004b
+ 0x0802004c
+ 0x0803004d
+ 0x0804004e
+ 0x0805004f
+ 0x08060050
+ 0x08070051
+ 0x08080052 >;
+ autorepeat;
+ st,mode = <0>;
+ status = "okay";
+ };
+
+ rtc at e0580000 {
+ status = "okay";
+ };
+
+ serial at e0000000 {
+ status = "okay";
+ };
+
+ serial at b4100000 {
+ status = "okay";
+ };
+
+ wdt at ec800620 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
new file mode 100644
index 0000000..a26fc47
--- /dev/null
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -0,0 +1,56 @@
+/*
+ * DTS file for all SPEAr1340 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar at st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+ compatible = "st,spear1340";
+
+ ahb {
+ ahci at b1000000 {
+ compatible = "snps,spear-ahci";
+ reg = <0xb1000000 0x10000>;
+ interrupts = <0 72 0x4>;
+ status = "disabled";
+ };
+
+ spi1: spi at 5d400000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x5d400000 0x1000>;
+ interrupts = <0 99 0x4>;
+ status = "disabled";
+ };
+
+ apb {
+ i2c1: i2c at b4000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xb4000000 0x1000>;
+ interrupts = <0 104 0x4>;
+ status = "disabled";
+ };
+
+ serial at b4100000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xb4100000 0x1000>;
+ interrupts = <0 105 0x4>;
+ status = "disabled";
+ };
+
+ thermal at e07008c4 {
+ st,thermal-flags = <0x2a00>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
new file mode 100644
index 0000000..a9d1872
--- /dev/null
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -0,0 +1,258 @@
+/*
+ * DTS file for all SPEAr13xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar at st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu at 1 {
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ gic: interrupt-controller at ec801000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = < 0xec801000 0x1000 >,
+ < 0xec800100 0x0100 >;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 8 0x04
+ 0 9 0x04>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0xed000000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyAMA0,115200";
+ };
+
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x50000000 0x50000000 0x10000000
+ 0xb0000000 0xb0000000 0x10000000
+ 0xe0000000 0xe0000000 0x10000000>;
+
+ sdhci at b3000000 {
+ compatible = "st,sdhci-spear";
+ reg = <0xb3000000 0x100>;
+ interrupts = <0 28 0x4>;
+ status = "disabled";
+ };
+
+ cf at b2800000 {
+ compatible = "arasan,cf-spear1340";
+ reg = <0xb2800000 0x100>;
+ interrupts = <0 29 0x4>;
+ status = "disabled";
+ };
+
+ dma at ea800000 {
+ compatible = "snps,dma-spear1340";
+ reg = <0xea800000 0x1000>;
+ interrupts = <0 19 0x4>;
+ status = "disabled";
+ };
+
+ dma at eb000000 {
+ compatible = "snps,dma-spear1340";
+ reg = <0xeb000000 0x1000>;
+ interrupts = <0 59 0x4>;
+ status = "disabled";
+ };
+
+ fsmc: flash at b0000000 {
+ compatible = "st,spear600-fsmc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb0000000 0x1000 /* FSMC Register */
+ 0xb0800000 0x0010>; /* NAND Base */
+ reg-names = "fsmc_regs", "nand_data";
+ interrupts = <0 20 0x4
+ 0 21 0x4
+ 0 22 0x4
+ 0 23 0x4>;
+ st,ale-off = <0x20000>;
+ st,cle-off = <0x10000>;
+ status = "disabled";
+ };
+
+ gmac0: eth at e2000000 {
+ compatible = "st,spear600-gmac";
+ reg = <0xe2000000 0x8000>;
+ interrupts = <0 23 0x4
+ 0 24 0x4>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ status = "disabled";
+ };
+
+ smi: flash at ea000000 {
+ compatible = "st,spear600-smi";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xea000000 0x1000>;
+ interrupts = <0 30 0x4>;
+ status = "disabled";
+ };
+
+ spi0: spi at e0100000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0xe0100000 0x1000>;
+ interrupts = <0 31 0x4>;
+ status = "disabled";
+ };
+
+ ehci at e4800000 {
+ compatible = "st,spear600-ehci", "usb-ehci";
+ reg = <0xe4800000 0x1000>;
+ interrupts = <0 64 0x4>;
+ status = "disabled";
+ };
+
+ ehci at e5800000 {
+ compatible = "st,spear600-ehci", "usb-ehci";
+ reg = <0xe5800000 0x1000>;
+ interrupts = <0 66 0x4>;
+ status = "disabled";
+ };
+
+ ohci at e4000000 {
+ compatible = "st,spear600-ohci", "usb-ohci";
+ reg = <0xe4000000 0x1000>;
+ interrupts = <0 65 0x4>;
+ status = "disabled";
+ };
+
+ ohci at e5000000 {
+ compatible = "st,spear600-ohci", "usb-ohci";
+ reg = <0xe5000000 0x1000>;
+ interrupts = <0 67 0x4>;
+ status = "disabled";
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x50000000 0x50000000 0x10000000
+ 0xb0000000 0xb0000000 0x10000000
+ 0xe0000000 0xe0000000 0x10000000>;
+
+ gpio0: gpio at e0600000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xe0600000 0x1000>;
+ interrupts = <0 24 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio1: gpio at e0680000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xe0680000 0x1000>;
+ interrupts = <0 25 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ kbd at e0300000 {
+ compatible = "st,spear300-kbd";
+ reg = <0xe0300000 0x1000>;
+ interrupts = <0 52 0x4>;
+ status = "disabled";
+ };
+
+ i2c0: i2c at e0280000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xe0280000 0x1000>;
+ interrupts = <0 41 0x4>;
+ status = "disabled";
+ };
+
+ rtc at e0580000 {
+ compatible = "st,spear-rtc";
+ reg = <0xe0580000 0x1000>;
+ interrupts = <0 36 0x4>;
+ status = "disabled";
+ };
+
+ serial at e0000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xe0000000 0x1000>;
+ interrupts = <0 36 0x4>;
+ status = "disabled";
+ };
+
+ adc at e0080000 {
+ compatible = "st,spear600-adc";
+ reg = <0xe0080000 0x1000>;
+ interrupts = <0 44 0x4>;
+ status = "disabled";
+ };
+
+ timer at ec800600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xec800620 0x20>;
+ interrupts = <1 13 0x301>;
+ };
+
+ wdt at ec800620 {
+ compatible = "arm,mpcore-wdt";
+ reg = <0xec800620 0x1000>;
+ interrupts = <1 14 0x301>;
+ status = "disabled";
+ };
+
+ thermal at e07008c4 {
+ compatible = "st,thermal-spear1340";
+ reg = <0xe07008c4 0x4>;
+ };
+ };
+ };
+};
--
1.7.9
More information about the linux-arm-kernel
mailing list