[PATCH RESEND v3] wdt: Device tree support for pnx4008-wdt
Roland Stigge
stigge at antcom.de
Fri Apr 20 10:46:23 EDT 2012
This patch adds watchdog support to pnx4008-wdt.c
Signed-off-by: Roland Stigge <stigge at antcom.de>
Reviewed-by: Arnd Bergmann <arnd at arndb.de>
---
Applies to v3.4-rc3
NOTE: I separated out this patch from the first patch series of the LPC32xx
device tree conversion because most of those patches are already applied to
-next and are basically unrelated. The LPC32xx devicetree conversion builds
upon this patch.
Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt | 13 +++++++++++++
drivers/watchdog/pnx4008_wdt.c | 10 ++++++++++
2 files changed, 23 insertions(+)
--- /dev/null
+++ linux-2.6/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
@@ -0,0 +1,13 @@
+* NXP PNX watchdog timer
+
+Required properties:
+- compatible: must be "nxp,pnx4008-wdt"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+Example:
+
+ watchdog at 4003C000 {
+ compatible = "nxp,pnx4008-wdt";
+ reg = <0x4003C000 0x1000>;
+ };
--- linux-2.6.orig/drivers/watchdog/pnx4008_wdt.c
+++ linux-2.6/drivers/watchdog/pnx4008_wdt.c
@@ -32,6 +32,7 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/err.h>
+#include <linux/of.h>
#include <mach/hardware.h>
/* WatchDog Timer - Chapter 23 Page 207 */
@@ -201,10 +202,19 @@ static int __devexit pnx4008_wdt_remove(
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id pnx4008_wdt_match[] = {
+ { .compatible = "nxp,pnx4008-wdt" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pnx4008_wdt_match);
+#endif
+
static struct platform_driver platform_wdt_driver = {
.driver = {
.name = "pnx4008-watchdog",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(pnx4008_wdt_match),
},
.probe = pnx4008_wdt_probe,
.remove = __devexit_p(pnx4008_wdt_remove),
More information about the linux-arm-kernel
mailing list