[PATCH 02/40] clk: add a fixed factor clock

[Viresh Kumar]

On 4/10/2012 7:15 PM, Sascha Hauer wrote:
> Having fixed factors/dividers in hardware is a common pattern, so
> add a basic clock type doing this. It basically describes a fixed
> factor clock using a nominator and a denominator.
> 
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> ---
>  drivers/clk/Makefile           |    2 +-
>  drivers/clk/clk-fixed-factor.c |   97 ++++++++++++++++++++++++++++++++++++++++
>  include/linux/clk-provider.h   |    4 ++
>  3 files changed, 102 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/clk/clk-fixed-factor.c

@Mike: It would be better if you can take this patch atleast ASAP in your next,
so that Arnd can pull in SPEAr clk patches.

Hi Sascha/Mike,

Please see if following can be squashed with this patch. This clock is
used for SPEAr too :)

---
 drivers/clk/clk-fixed-factor.c |   12 ++----------
 1 files changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
index 7c5e1fc..aaf5a88 100644
--- a/drivers/clk/clk-fixed-factor.c
+++ b/drivers/clk/clk-fixed-factor.c
@@ -16,7 +16,6 @@ struct clk_fixed_factor {
 	struct clk_hw	hw;
 	unsigned int	mult;
 	unsigned int	div;
-	char		*parent[1];
 };
 
 #define to_clk_fixed_factor(_hw) container_of(_hw, struct clk_fixed_factor, hw)
@@ -75,22 +74,15 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
 	fix->mult = mult;
 	fix->div = div;
 
-	if (parent_name) {
-		fix->parent[0] = kstrdup(parent_name, GFP_KERNEL);
-		if (!fix->parent[0])
-			goto out;
-	}
-
 	clk = clk_register(dev, name,
 			&clk_fixed_factor_ops, &fix->hw,
-			fix->parent,
+			&parent_name,
 			(parent_name ? 1 : 0),
 			flags);
+
 	if (clk)
 		return clk;
 
-out:
-	kfree(fix->parent[0]);
 	kfree(fix);
 
 	return NULL;
-- 
1.7.9