[PATCH 07/10] MXS: Add USB PHY driver

[Marek Vasut]

Dear Sascha Hauer,

> On Wed, Apr 18, 2012 at 07:46:31PM +0200, Marek Vasut wrote:
> > Add driver that controls the built-in USB PHY in the i.MX233/i.MX28. This
> > enables the PHY upon powerup and shuts it down on shutdown.
> > 
> > Signed-off-by: Marek Vasut <marex at denx.de>
> > Cc: Chen Peter-B29397 <B29397 at freescale.com>
> > Cc: Detlev Zundel <dzu at denx.de>
> > Cc: Fabio Estevam <festevam at gmail.com>
> > Cc: Li Frank-B20596 <B20596 at freescale.com>
> > Cc: Lin Tony-B19295 <B19295 at freescale.com>
> > Cc: Linux USB <linux-usb at vger.kernel.org>
> > Cc: Sascha Hauer <s.hauer at pengutronix.de>
> > Cc: Shawn Guo <shawn.guo at freescale.com>
> > Cc: Shawn Guo <shawn.guo at linaro.org>
> > Cc: Stefano Babic <sbabic at denx.de>
> > Cc: Subodh Nijsure <snijsure at grid-net.com>
> > Cc: Tony Lin <tony.lin at freescale.com>
> > Cc: Wolfgang Denk <wd at denx.de>
> > ---
> > 
> >  drivers/usb/otg/Kconfig   |   10 ++
> >  drivers/usb/otg/Makefile  |    1 +
> >  drivers/usb/otg/mxs-phy.c |  305
> >  +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 316
> >  insertions(+)
> >  create mode 100644 drivers/usb/otg/mxs-phy.c
> > 
> > diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
> > index e7c6325..1de1495 100644
> > --- a/drivers/usb/otg/Kconfig
> > +++ b/drivers/usb/otg/Kconfig
> > @@ -122,6 +122,16 @@ config USB_IMX_COMPOSITE
> > 
> >  	  Composite driver that handles clock and memory mapping for
> >  	  i.MX USB host and USB PHY.
> > 
> > +config USB_MXS_PHY
> > +	tristate "Freescale i.MX28 USB PHY support"
> > +	select USB_OTG_UTILS
> > +	select USB_IMX_COMPOSITE
> > +	help
> > +	  Say Y here if you want to build Freescale i.MX28 USB PHY
> > +	  driver in kernel.
> > +
> > +	  To compile this driver as a module, choose M here.
> > +
> > 
> >  config USB_MV_OTG
> >  
> >  	tristate "Marvell USB OTG support"
> >  	depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
> > 
> > diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
> > index e3feaca..56700b3 100644
> > --- a/drivers/usb/otg/Makefile
> > +++ b/drivers/usb/otg/Makefile
> > @@ -21,4 +21,5 @@ obj-$(CONFIG_AB8500_USB)	+= ab8500-usb.o
> > 
> >  fsl_usb2_otg-objs		:= fsl_otg.o otg_fsm.o
> >  obj-$(CONFIG_FSL_USB2_OTG)	+= fsl_usb2_otg.o
> >  obj-$(CONFIG_USB_IMX_COMPOSITE)	+= imx-usb.o
> > 
> > +obj-$(CONFIG_USB_MXS_PHY)	+= mxs-phy.o
> > 
> >  obj-$(CONFIG_USB_MV_OTG)	+= mv_otg.o
> > 
> > +
> > +struct mxs_usb_phy {
> > +	struct usb_phy		phy;
> > +
> > +	struct work_struct	work;
> > +
> > +	struct clk		*clk;
> > +	struct resource		*mem_res;
> > +	void __iomem		*mem;
> > +	int			irq;
> 
> irq is unused.
> 
> > +
> > +static void mxs_usb_work(struct work_struct *w)
> > +{
> > +	struct mxs_usb_phy *phy = container_of(w, struct mxs_usb_phy, work);
> > +	struct usb_otg *otg = phy->phy.otg;
> > +	struct usb_hcd *hcd;
> > +
> > +	switch (otg->phy->state) {
> > +	case OTG_STATE_A_HOST:
> > +		if (otg->host) {
> > +			hcd = bus_to_hcd(otg->host);
> > +			usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
> > +		}
> > +		break;
> > +	default:
> > +		break;
> > +	}
> > +}
> 
> This function should be in imx-otg.

You mean imx-usb? What'd it do in there?

> > +
> > +static int __devinit mxs_phy_probe(struct platform_device *pdev)
> > +{
> > +	struct mxs_usb_phy *phy;
> > +	void *retp;
> > +	int ret;
> > +
> > +	/* Allocate PHY driver's private date. */
> > +	phy = kzalloc(sizeof(*phy), GFP_KERNEL);
> 
> devm?
> 
> > +	if (!phy) {
> > +		dev_err(&pdev->dev, "Failed to allocate USB PHY structure!\n");
> > +		ret = -ENOMEM;
> > +		goto err_alloc_phy;
> > +	}
> > +
> > +	/* Allocate OTG structure. */
> > +	phy->phy.otg = kzalloc(sizeof(*phy->phy.otg), GFP_KERNEL);
> 
> devm?
> 
> > +	if (!phy->phy.otg) {
> > +		dev_err(&pdev->dev, "Failed to allocate USB OTG structure!\n");
> > +		ret = -ENOMEM;
> > +		goto err_alloc_otg;
> > +	}
> > +
> > +	/* Claim the PHY clock. */
> > +	phy->clk = clk_get(&pdev->dev, "phy");
> > +	if (!phy->clk) {
> > +		dev_err(&pdev->dev, "Failed to claim clock for USB PHY\n");
> > +		ret = PTR_ERR(phy->clk);
> > +		goto err_claim_phy_clock;
> > +	}
> > +
> > +	/* Prepare PHY clock. */
> > +	ret = clk_prepare(phy->clk);
> 
> It should be clear that a function named clk_prepare prepares the clock.
> Please remove such comments.
> 
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Failed to prepare clock for USB PHY.\n");
> > +		goto err_prepare_phy_clock;
> > +	}
> > +
> > +	/* Get memory area for PHY from resources. */
> > +	phy->mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	if (!phy->mem_res) {
> > +		dev_err(&pdev->dev, "Specify memory area for this USB PHY!\n");
> > +		ret = -ENODEV;
> > +		goto err_get_phy_resource;
> > +	}
> > +
> > +	/* Request the memory region for this USB PHY. */
> > +	retp = devm_request_mem_region(&pdev->dev, phy->mem_res->start,
> > +			resource_size(phy->mem_res), pdev->name);
> 
> The 'm' in devm is for 'managed' which means that these resources are
> automatically released on driver exit. You don't have to release them
> manually. In fact you must not release them with the regular functions.
> If you want to release them manually you have to use the devm variants.
> 
> Sascha