[PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500

[Lee Jones]

From: Lee Jones <lee.jones at linaro.org>
Date: Mon, 16 Apr 2012 10:18:43 +0100
Subject: [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500 variants

Provide a means to collect attributes specific to ST-Ericsson's
ux500 variant series. This patch registers itself as the AMBA
driver to be called during the probe process. Once all
attributes and ux500 specifics are are collected the normal
mmci core probe is called.

Acked-by: Linus Walleij <linus.walleij at linaro.org>
Acked-by: Arnd Bergmann <arnd at arndb.de>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/mmc/host/mmci.c |   58 +++++++++++++++++++++++++++++++++++++++++++---
 1 files changed, 54 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 032b847..5a7da17 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -15,6 +15,7 @@
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/highmem.h>
@@ -1196,21 +1197,70 @@ static const struct mmc_host_ops mmci_ops = {
 	.get_cd		= mmci_get_cd,
 };
 
+#ifdef CONFIG_OF
+static void mmci_dt_populate_generic_pdata(struct device_node *np,
+					struct mmci_platform_data *pdata)
+{
+	int bus_width = 0;
+
+	of_property_read_u32(np, "wp-gpios", &pdata->gpio_wp);
+	if (!pdata->gpio_wp)
+		pdata->gpio_wp = -1;
+
+	of_property_read_u32(np, "cd-gpios", &pdata->gpio_cd);
+	if (!pdata->gpio_cd)
+		pdata->gpio_cd = -1;
+
+	if (of_get_property(np, "cd-inverted", NULL))
+		pdata->cd_invert = true;
+	else
+		pdata->cd_invert = false;
+
+	of_property_read_u32(np, "max-frequency", &pdata->f_max);
+	if (!pdata->f_max)
+		pr_warn("%s has no 'max-frequency' property\n", np->full_name);
+
+	if (of_get_property(np, "mmc-cap-mmc-highspeed", NULL))
+		pdata->capabilities |= MMC_CAP_MMC_HIGHSPEED;
+	if (of_get_property(np, "mmc-cap-sd-highspeed", NULL))
+		pdata->capabilities |= MMC_CAP_SD_HIGHSPEED;
+
+	of_property_read_u32(np, "bus-width", &bus_width);
+	switch (bus_width) {
+	case 0 :
+		/* No bus-width supplied. */
+		break;
+	case 4 :
+		pdata->capabilities |= MMC_CAP_4_BIT_DATA;
+		break;
+	case 8 :
+		pdata->capabilities |= MMC_CAP_8_BIT_DATA;
+		break;
+	default :
+		pr_warn("%s: Unsupported bus width\n", np->full_name);
+	}
+}
+#endif
+
 static int __devinit mmci_probe(struct amba_device *dev,
 	const struct amba_id *id)
 {
 	struct mmci_platform_data *plat = dev->dev.platform_data;
+	struct device_node *np = dev->dev.of_node;
 	struct variant_data *variant = id->data;
 	struct mmci_host *host;
 	struct mmc_host *mmc;
 	int ret;
 
-	/* must have platform data */
-	if (!plat) {
-		ret = -EINVAL;
-		goto out;
+	/* Must have platform data or Device Tree. */
+	if (!plat && !np) {
+		dev_err(&dev->dev, "No plat data or DT found\n");
+		return -EINVAL;
 	}
 
+	if (np)
+		mmci_dt_populate_generic_pdata(np, plat);
+
 	ret = amba_request_regions(dev, DRIVER_NAME);
 	if (ret)
 		goto out;
-- 
1.7.9.1