[PATCH v2] rtc: add support for Freescale SNVS RTC
Ying-Chun Liu (PaulLiu)
paul.liu at linaro.org
Sat Apr 14 03:07:17 EDT 2012
From: "Ying-Chun Liu (PaulLiu)" <paul.liu at linaro.org>
This adds an RTC driver for the Low Power (LP) section of SNVS.
It hooks into the /dev/rtc interface and supports ioctl to complete RTC
features. This driver supports device tree bindings.
It only uses the RTC hw in non-secure mode.
Signed-off-by: Anish Trivedi <anish at freescale.com>
Signed-off-by: Eric Miao <eric.miao at linaro.org>
Signed-off-by: Anson Huang <b20788 at freescale.com>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu at linaro.org>
Cc: Alessandro Zummo <a.zummo at towertech.it>
Cc: Shawn Guo <shawn.guo at linaro.org>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
---
Documentation/devicetree/bindings/rtc/snvs-rtc.txt | 18 +
drivers/rtc/Kconfig | 10 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-snvs.c | 644 ++++++++++++++++++++
4 files changed, 673 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/snvs-rtc.txt
create mode 100644 drivers/rtc/rtc-snvs.c
diff --git a/Documentation/devicetree/bindings/rtc/snvs-rtc.txt b/Documentation/devicetree/bindings/rtc/snvs-rtc.txt
new file mode 100644
index 0000000..95b0a75
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/snvs-rtc.txt
@@ -0,0 +1,18 @@
+* Freescale SNVS RTC
+
+Required properties:
+- compatible : Should be "fsl,snvs-rtc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: Two interrupt numbers to the cpu should be specified. First
+ interrupt number is the consolidated interrupt in non TrustZone. The second
+ interrupt number is the security interrupt in TrustZone. The number of cells
+ representing a interrupt depends on the parent interrupt controller.
+
+Example:
+
+snvs at 020cc000 {
+ compatible = "fsl,snvs-rtc";
+ reg = <0x020cc000 0x4000>;
+ interrupts = <0 19 0x04 0 20 0x04>;
+};
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 8c8377d..6597ab6 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -641,6 +641,16 @@ config RTC_MXC
This driver can also be built as a module, if so, the module
will be called "rtc-mxc".
+config RTC_DRV_SNVS
+ tristate "Freescale SNVS Real Time Clock"
+ depends on ARCH_MXC
+ help
+ If you say yes here you get support for the Freescale SNVS
+ Low Power (LP) RTC module.
+
+ This driver can also be built as a module, if so, the module
+ will be called "rtc-snvs".
+
config RTC_DRV_BQ4802
tristate "TI BQ4802"
help
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 727ae77..c91042b 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o
obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o
obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o
obj-$(CONFIG_RTC_DRV_SH) += rtc-sh.o
+obj-$(CONFIG_RTC_DRV_SNVS) += rtc-snvs.o
obj-$(CONFIG_RTC_DRV_SPEAR) += rtc-spear.o
obj-$(CONFIG_RTC_DRV_STARFIRE) += rtc-starfire.o
obj-$(CONFIG_RTC_DRV_STK17TA8) += rtc-stk17ta8.o
diff --git a/drivers/rtc/rtc-snvs.c b/drivers/rtc/rtc-snvs.c
new file mode 100644
index 0000000..a717084
--- /dev/null
+++ b/drivers/rtc/rtc-snvs.c
@@ -0,0 +1,644 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+/*
+ * Implementation based on rtc-ds1553.c
+ */
+
+/*
+ * RTC Real Time Clock (RTC) Driver
+ *
+ * Secure Real Time Clock (SRTC) interface in Freescale's SNVS module
+ *
+ * This file contains Real Time Clock interface for Linux. The Freescale
+ * SNVS module's Low Power (LP) SRTC functionality is utilized in this driver,
+ * in non-secure mode.
+ */
+
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/rtc.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/sched.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+
+/* Register definitions */
+#define SNVS_HPSR 0x14 /* HP Status Register */
+#define SNVS_LPCR 0x38 /* LP Control Register */
+#define SNVS_LPSR 0x4C /* LP Status Register */
+#define SNVS_LPSRTCMR 0x50 /* LP Secure Real Time Counter MSB Register */
+#define SNVS_LPSRTCLR 0x54 /* LP Secure Real Time Counter LSB Register */
+#define SNVS_LPTAR 0x58 /* LP Time Alarm Register */
+#define SNVS_LPSMCMR 0x5C /* LP Secure Monotonic Counter MSB Register */
+#define SNVS_LPSMCLR 0x60 /* LP Secure Monotonic Counter LSB Register */
+#define SNVS_LPPGDR 0x64 /* LP Power Glitch Detector Register */
+#define SNVS_LPGPR 0x68 /* LP General Purpose Register */
+
+/* Bit Definitions */
+#define SNVS_HPSR_SSM_ST_MASK 0x00000F00
+#define SNVS_HPSR_SSM_ST_SHIFT 8
+
+#define SNVS_LPCR_SRTC_ENV (1 << 0)
+#define SNVS_LPCR_LPTA_EN (1 << 1)
+#define SNVS_LPCR_LPWUI_EN (1 << 3)
+#define SNVS_LPCR_ALL_INT_EN (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN)
+#define SNVS_LPSR_LPTA (1 << 0)
+#define SNVS_LPPGDR_INIT 0x41736166
+
+/* Other defines */
+#define SSM_ST_CHECK 0x9
+#define SSM_ST_NON_SECURE 0xB
+#define CNTR_TO_SECS_SH 15 /* Converts 47-bit counter to 32-bit seconds */
+
+struct rtc_drv_data {
+ struct rtc_device *rtc;
+ void __iomem *ioaddr;
+ int irq;
+ bool irq_enable;
+};
+
+static DEFINE_SPINLOCK(rtc_lock);
+static int64_t time_diff;
+
+/**
+ * rtc_read_lp_counter() - Read the LP counter
+ *
+ * @ioaddr: I/O address of the rtc
+ *
+ * LP counter register reads should always use this function.
+ * This function reads 2 consective times from LP counter register
+ * until the 2 values match. This is to avoid reading corrupt
+ * value if the counter is in the middle of updating
+ */
+static inline u32 rtc_read_lp_counter(void __iomem *ioaddr)
+{
+ u64 read1, read2;
+ u32 counter_sec;
+
+ do {
+ /* MSB */
+ read1 = readl(ioaddr + SNVS_LPSRTCMR);
+ read1 <<= 32;
+ /* LSB */
+ read1 |= readl(ioaddr + SNVS_LPSRTCLR);
+
+ /* MSB */
+ read2 = readl(ioaddr + SNVS_LPSRTCMR);
+ read2 <<= 32;
+ /* LSB */
+ read2 |= readl(ioaddr + SNVS_LPSRTCLR);
+ } while (read1 != read2);
+
+ /* Convert 47-bit counter to 32-bit raw second count */
+ counter_sec = (u32) (read1 >> CNTR_TO_SECS_SH);
+
+ return counter_sec;
+}
+
+/**
+ * rtc_write_sync_lp() - write data to registers
+ *
+ * @ioaddr: I/O address of the rtc
+ *
+ * This function does write synchronization for writes to the lp srtc block.
+ * To take care of the asynchronous CKIL clock, all writes from the IP domain
+ * will be synchronized to the CKIL domain.
+ */
+static inline void rtc_write_sync_lp(void __iomem *ioaddr)
+{
+ unsigned int i, count1, count2, count3;
+
+ /* Wait for 3 CKIL cycles */
+ for (i = 0; i < 3; i++) {
+ /* Do consective reads of LSB of counter to ensure integrity */
+ do {
+ count1 = readl(ioaddr + SNVS_LPSRTCLR);
+ count2 = readl(ioaddr + SNVS_LPSRTCLR);
+ } while (count1 != count2);
+
+ /* Now wait until counter value changes */
+ do {
+ do {
+ count2 = readl(ioaddr + SNVS_LPSRTCLR);
+ count3 = readl(ioaddr + SNVS_LPSRTCLR);
+ } while (count2 != count3);
+ } while (count3 == count1);
+ }
+}
+
+/**
+ * rtc_update_alarm() - update RTC alarm registers
+ *
+ * @dev: the dev of rtc
+ * @alrm: the new alarm value to be updated in the RTC
+ *
+ * Returns 0 if successful; non-zero otherwise.
+ *
+ * This function updates the RTC alarm registers and then clears all the
+ * interrupt status bits.
+ */
+static int rtc_update_alarm(struct device *dev, struct rtc_time *alrm)
+{
+ struct rtc_drv_data *pdata = dev_get_drvdata(dev);
+ void __iomem *ioaddr = pdata->ioaddr;
+ struct rtc_time alarm_tm, now_tm;
+ unsigned long now, time, lp_cr;
+ int ret;
+
+ now = rtc_read_lp_counter(ioaddr);
+ rtc_time_to_tm(now, &now_tm);
+
+ alarm_tm.tm_year = now_tm.tm_year;
+ alarm_tm.tm_mon = now_tm.tm_mon;
+ alarm_tm.tm_mday = now_tm.tm_mday;
+
+ alarm_tm.tm_hour = alrm->tm_hour;
+ alarm_tm.tm_min = alrm->tm_min;
+ alarm_tm.tm_sec = alrm->tm_sec;
+
+ rtc_tm_to_time(&now_tm, &now);
+ rtc_tm_to_time(&alarm_tm, &time);
+
+ if (time < now) {
+ time += 60 * 60 * 24;
+ rtc_time_to_tm(time, &alarm_tm);
+ }
+ ret = rtc_tm_to_time(&alarm_tm, &time);
+
+ /* Have to clear LPTA_EN before programming new alarm time in LPTAR */
+ lp_cr = readl(ioaddr + SNVS_LPCR);
+ writel(lp_cr & ~SNVS_LPCR_LPTA_EN, ioaddr + SNVS_LPCR);
+ rtc_write_sync_lp(ioaddr);
+
+ writel(time, ioaddr + SNVS_LPTAR);
+
+ /* clear alarm interrupt status bit */
+ writel(SNVS_LPSR_LPTA, ioaddr + SNVS_LPSR);
+
+ return ret;
+}
+
+/**
+ * snvs_rtc_interrupt() - This function is the RTC interrupt service routine.
+ *
+ * @irq: RTC IRQ number
+ * @dev_id: device ID which is not used
+ *
+ * Returns IRQ_HANDLED as defined in the include/linux/interrupt.h file.
+ */
+static irqreturn_t snvs_rtc_interrupt(int irq, void *dev_id)
+{
+ struct platform_device *pdev = dev_id;
+ struct rtc_drv_data *pdata = platform_get_drvdata(pdev);
+ void __iomem *ioaddr = pdata->ioaddr;
+ u32 lp_status, lp_cr;
+ u32 events = 0;
+
+ lp_status = readl(ioaddr + SNVS_LPSR);
+ lp_cr = readl(ioaddr + SNVS_LPCR);
+
+ /* update irq data & counter */
+ if (lp_status & SNVS_LPSR_LPTA) {
+ if (lp_cr & SNVS_LPCR_LPTA_EN)
+ events |= (RTC_AF | RTC_IRQF);
+
+ /* disable further lp alarm interrupts */
+ lp_cr &= ~(SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN);
+ }
+
+ /* Update interrupt enables */
+ writel(lp_cr, ioaddr + SNVS_LPCR);
+
+ /* If no interrupts are enabled, turn off interrupts in kernel */
+ if (((lp_cr & SNVS_LPCR_ALL_INT_EN) == 0) && (pdata->irq_enable)) {
+ disable_irq_nosync(pdata->irq);
+ pdata->irq_enable = false;
+ }
+
+ /* clear interrupt status */
+ writel(lp_status, ioaddr + SNVS_LPSR);
+
+ rtc_write_sync_lp(ioaddr);
+ rtc_update_irq(pdata->rtc, 1, events);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * snvs_rtc_read_time() - This function reads the current RTC time into tm
+ * in Gregorian date.
+ *
+ * @tm: contains the RTC time value upon return
+ *
+ * Returns 0 if successful; non-zero otherwise.
+ */
+static int snvs_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct rtc_drv_data *pdata = dev_get_drvdata(dev);
+ void __iomem *ioaddr = pdata->ioaddr;
+
+ rtc_time_to_tm(rtc_read_lp_counter(ioaddr), tm);
+
+ return 0;
+}
+
+/**
+ * snvs_rtc_set_time() - This function sets the internal RTC time based on tm
+ * in Gregorian date.
+ *
+ * @tm: the time value to be set in the RTC
+ *
+ * Returns 0 if successful; non-zero otherwise.
+ */
+static int snvs_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct rtc_drv_data *pdata = dev_get_drvdata(dev);
+ void __iomem *ioaddr = pdata->ioaddr;
+ unsigned long time;
+ int ret;
+ u32 lp_cr;
+ u64 old_time_47bit, new_time_47bit;
+ unsigned long timeout;
+
+ ret = rtc_tm_to_time(tm, &time);
+ if (ret != 0)
+ return ret;
+
+ old_time_47bit = (((u64) (readl(ioaddr + SNVS_LPSRTCMR) &
+ ((0x1 << CNTR_TO_SECS_SH) - 1)) << 32) |
+ ((u64) readl(ioaddr + SNVS_LPSRTCLR)));
+
+ /* Disable RTC first */
+ lp_cr = readl(ioaddr + SNVS_LPCR) & ~SNVS_LPCR_SRTC_ENV;
+ writel(lp_cr, ioaddr + SNVS_LPCR);
+ timeout = jiffies + msecs_to_jiffies(3000);
+ while (readl(ioaddr + SNVS_LPCR) & SNVS_LPCR_SRTC_ENV) {
+ if (time_after(jiffies, timeout)) {
+ dev_err(dev, "timeout on temporarily disabling RTC\n");
+ return -EBUSY;
+ }
+ }
+
+ /* Write 32-bit time to 47-bit timer, leaving 15 LSBs blank */
+ writel(time << CNTR_TO_SECS_SH, ioaddr + SNVS_LPSRTCLR);
+ writel(time >> (32 - CNTR_TO_SECS_SH), ioaddr + SNVS_LPSRTCMR);
+
+ /* Enable RTC again */
+ writel(lp_cr | SNVS_LPCR_SRTC_ENV, ioaddr + SNVS_LPCR);
+ timeout = jiffies + msecs_to_jiffies(3000);
+ while (!(readl(ioaddr + SNVS_LPCR) & SNVS_LPCR_SRTC_ENV)) {
+ if (time_after(jiffies, timeout)) {
+ dev_err(dev, "timeout on enabling RTC back\n");
+ return -EBUSY;
+ }
+ }
+
+ rtc_write_sync_lp(ioaddr);
+
+ new_time_47bit = (((u64) (readl(ioaddr + SNVS_LPSRTCMR) &
+ ((0x1 << CNTR_TO_SECS_SH) - 1)) << 32) |
+ ((u64) readl(ioaddr + SNVS_LPSRTCLR)));
+
+ time_diff = new_time_47bit - old_time_47bit;
+
+ return 0;
+}
+
+/**
+ * snvs_rtc_read_data() - Read data from RTC
+ *
+ * @alrm: contains the RTC alarm value upon return
+ *
+ * Returns 0 if successful; non-zero otherwise.
+ *
+ * This function reads the current alarm value into the passed in \b alrm
+ * argument. It updates the \b alrm's pending field value based on the whether
+ * an alarm interrupt occurs or not.
+ */
+static int snvs_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct rtc_drv_data *pdata = dev_get_drvdata(dev);
+ void __iomem *ioaddr = pdata->ioaddr;
+
+ rtc_time_to_tm(readl(ioaddr + SNVS_LPTAR), &alrm->time);
+ alrm->pending =
+ ((readl(ioaddr + SNVS_LPSR) & SNVS_LPSR_LPTA) != 0) ? 1 : 0;
+
+ return 0;
+}
+
+/**
+ * snvs_rtc_set_alarm() - This function sets the RTC alarm based on passed
+ * in alrm.
+ *
+ * @alrm: the alarm value to be set in the RTC
+ *
+ * Returns 0 if successful; non-zero otherwise.
+ */
+static int snvs_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct rtc_drv_data *pdata = dev_get_drvdata(dev);
+ void __iomem *ioaddr = pdata->ioaddr;
+ unsigned long lock_flags = 0;
+ u32 lp_cr;
+ int ret;
+
+ ret = rtc_valid_tm(&alrm->time);
+ if (ret)
+ return ret;
+
+ spin_lock_irqsave(&rtc_lock, lock_flags);
+
+ ret = rtc_update_alarm(dev, &alrm->time);
+ if (ret)
+ goto out;
+
+ lp_cr = readl(ioaddr + SNVS_LPCR);
+
+ if (alrm->enabled)
+ lp_cr |= (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN);
+ else
+ lp_cr &= ~(SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN);
+
+ if (lp_cr & SNVS_LPCR_ALL_INT_EN) {
+ if (!pdata->irq_enable) {
+ enable_irq(pdata->irq);
+ pdata->irq_enable = true;
+ }
+ } else {
+ if (pdata->irq_enable) {
+ disable_irq(pdata->irq);
+ pdata->irq_enable = false;
+ }
+ }
+
+ writel(lp_cr, ioaddr + SNVS_LPCR);
+
+out:
+ rtc_write_sync_lp(ioaddr);
+ spin_unlock_irqrestore(&rtc_lock, lock_flags);
+
+ return ret;
+}
+
+/**
+ * snvs_rtc_proc() - provide /proc/driver/rtc file
+ *
+ * @seq: buffer to hold the information that the driver wants to write
+ *
+ * Returns the number of bytes written into the rtc file.
+ *
+ * This function is used to provide the content for the /proc/driver/rtc
+ * file.
+ */
+static int snvs_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+ struct rtc_drv_data *pdata = dev_get_drvdata(dev);
+ void __iomem *ioaddr = pdata->ioaddr;
+
+ seq_printf(seq, "alarm_IRQ\t: %s\n",
+ (((readl(ioaddr + SNVS_LPCR)) & SNVS_LPCR_LPTA_EN) !=
+ 0) ? "yes" : "no");
+
+ return 0;
+}
+
+static int snvs_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
+{
+ struct rtc_drv_data *pdata = dev_get_drvdata(dev);
+ void __iomem *ioaddr = pdata->ioaddr;
+ u32 lp_cr;
+ unsigned long lock_flags = 0;
+
+ spin_lock_irqsave(&rtc_lock, lock_flags);
+
+ if (enable) {
+ if (!pdata->irq_enable) {
+ enable_irq(pdata->irq);
+ pdata->irq_enable = true;
+ }
+ lp_cr = readl(ioaddr + SNVS_LPCR);
+ lp_cr |= (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN);
+ writel(lp_cr, ioaddr + SNVS_LPCR);
+ } else {
+ lp_cr = readl(ioaddr + SNVS_LPCR);
+ lp_cr &= ~(SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN);
+ if (((lp_cr & SNVS_LPCR_ALL_INT_EN) == 0)
+ && (pdata->irq_enable)) {
+ disable_irq(pdata->irq);
+ pdata->irq_enable = false;
+ }
+ writel(lp_cr, ioaddr + SNVS_LPCR);
+ }
+
+ rtc_write_sync_lp(ioaddr);
+ spin_unlock_irqrestore(&rtc_lock, lock_flags);
+
+ return 0;
+}
+
+/* The RTC driver structure */
+static struct rtc_class_ops snvs_rtc_ops = {
+ .read_time = snvs_rtc_read_time,
+ .set_time = snvs_rtc_set_time,
+ .read_alarm = snvs_rtc_read_alarm,
+ .set_alarm = snvs_rtc_set_alarm,
+ .proc = snvs_rtc_proc,
+ .alarm_irq_enable = snvs_rtc_alarm_irq_enable,
+};
+
+/* SNVS RTC Power management control */
+static int __devinit snvs_rtc_probe(struct platform_device *pdev)
+{
+ struct timespec tv;
+ struct rtc_device *rtc;
+ struct rtc_drv_data *pdata = NULL;
+ void __iomem *ioaddr;
+ u32 lp_cr;
+ int ret = 0;
+
+ ioaddr = of_iomap(pdev->dev.of_node, 0);
+ if (!ioaddr)
+ return -EADDRNOTAVAIL;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->ioaddr = ioaddr;
+
+ /* Configure and enable the RTC */
+ pdata->irq = platform_get_irq(pdev, 0);
+ if (pdata->irq >= 0) {
+ if (request_irq(pdata->irq, snvs_rtc_interrupt, IRQF_SHARED,
+ pdev->name, pdev) < 0) {
+ dev_warn(&pdev->dev, "interrupt not available.\n");
+ pdata->irq = -1;
+ } else {
+ disable_irq(pdata->irq);
+ pdata->irq_enable = false;
+ }
+ }
+
+ /* initialize glitch detect */
+ writel(SNVS_LPPGDR_INIT, ioaddr + SNVS_LPPGDR);
+ udelay(100);
+
+ /* clear lp interrupt status */
+ writel(0xFFFFFFFF, ioaddr + SNVS_LPSR);
+
+ /* Enable RTC */
+ lp_cr = readl(ioaddr + SNVS_LPCR);
+ if ((lp_cr & SNVS_LPCR_SRTC_ENV) == 0)
+ writel(lp_cr | SNVS_LPCR_SRTC_ENV, ioaddr + SNVS_LPCR);
+ udelay(100);
+
+ writel(0xFFFFFFFF, ioaddr + SNVS_LPSR);
+ udelay(100);
+
+ platform_set_drvdata(pdev, pdata);
+
+ rtc = rtc_device_register(pdev->name, &pdev->dev,
+ &snvs_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc)) {
+ ret = PTR_ERR(rtc);
+ goto err_out;
+ }
+
+ pdata->rtc = rtc;
+
+ tv.tv_nsec = 0;
+ tv.tv_sec = rtc_read_lp_counter(ioaddr);
+
+ /* By default, devices should wakeup if they can */
+ /* So snvs is set as "should wakeup" as it can */
+ device_init_wakeup(&pdev->dev, 1);
+
+ return ret;
+
+err_out:
+ iounmap(ioaddr);
+ if (pdata->irq >= 0)
+ free_irq(pdata->irq, pdev);
+
+ return ret;
+}
+
+static int __devexit snvs_rtc_remove(struct platform_device *pdev)
+{
+ struct rtc_drv_data *pdata = platform_get_drvdata(pdev);
+ rtc_device_unregister(pdata->rtc);
+ if (pdata->irq >= 0)
+ free_irq(pdata->irq, pdev);
+ iounmap(pdata->ioaddr);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+/**
+ * snvs_rtc_suspend() - handling suspend
+ *
+ * @pdev: device descriptor
+ * @state: power state to enter.
+ *
+ * The function always returns 0.
+ *
+ * This function is called to save the system time delta relative to
+ * the SNVS RTC when enterring a low power state. This time delta is
+ * then used on resume to adjust the system time to account for time
+ * loss while suspended.
+ */
+static int snvs_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct rtc_drv_data *pdata = platform_get_drvdata(pdev);
+
+ if (device_may_wakeup(&pdev->dev)) {
+ enable_irq_wake(pdata->irq);
+ } else {
+ if (pdata->irq_enable)
+ disable_irq(pdata->irq);
+ }
+
+ return 0;
+}
+
+/**
+ * snvs_rtc_resume() - handling resume
+ *
+ * @pdev: device descriptor
+ *
+ * The function always returns 0.
+ *
+ * This function is called to correct the system time based on the
+ * current SNVS RTC time relative to the time delta saved during
+ * suspend.
+ */
+static int snvs_rtc_resume(struct platform_device *pdev)
+{
+ struct rtc_drv_data *pdata = platform_get_drvdata(pdev);
+
+ if (device_may_wakeup(&pdev->dev)) {
+ disable_irq_wake(pdata->irq);
+ } else {
+ if (pdata->irq_enable)
+ enable_irq(pdata->irq);
+ }
+
+ return 0;
+}
+#endif
+
+static const struct of_device_id __devinitdata snvs_dt_ids[] = {
+ { .compatible = "fsl,snvs-rtc" },
+ { /* sentinel */ }
+};
+
+/* Contains pointers to the power management callback functions. */
+static struct platform_driver snvs_rtc_driver = {
+ .driver = {
+ .name = "snvs_rtc",
+ .owner = THIS_MODULE,
+ .of_match_table = snvs_dt_ids,
+ },
+ .probe = snvs_rtc_probe,
+ .remove = __exit_p(snvs_rtc_remove),
+#ifdef CONFIG_PM
+ .suspend = snvs_rtc_suspend,
+ .resume = snvs_rtc_resume,
+#endif
+};
+
+module_platform_driver(snvs_rtc_driver);
+
+MODULE_AUTHOR("Anish Trivedi <anish at freescale.com>, "
+ "Eric Miao <eric.miao at linaro.org>, "
+ "Anson Huang <b20788 at freescale.com>, "
+ "Ying-Chun Liu (PaulLiu) <paul.liu at linaro.org>");
+MODULE_DESCRIPTION("SNVS Realtime Clock Driver (RTC)");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:snvs-rtc");
--
1.7.9.5
More information about the linux-arm-kernel
mailing list