[PATCH 1/9] ARM: at91: add at91sam9260 DT support
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Wed Apr 11 12:01:11 EDT 2012
The at91sam9260 and at91sam9g20 share most of the same IP.
So udpate the node property in the at91sam9g20 only.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
.../dts/{at91sam9g20.dtsi => at91sam9260.dtsi} | 8 +-
arch/arm/boot/dts/at91sam9g20.dtsi | 257 ++------------------
arch/arm/mach-at91/Makefile.boot | 1 +
3 files changed, 23 insertions(+), 243 deletions(-)
rename arch/arm/boot/dts/{at91sam9g20.dtsi => at91sam9260.dtsi} (96%)
rewrite arch/arm/boot/dts/at91sam9g20.dtsi (95%)
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
similarity index 96%
rename from arch/arm/boot/dts/at91sam9g20.dtsi
rename to arch/arm/boot/dts/at91sam9260.dtsi
index 799ad18..71c78d1 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -1,5 +1,5 @@
/*
- * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
+ * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
*
* Copyright (C) 2011 Atmel,
* 2011 Nicolas Ferre <nicolas.ferre at atmel.com>,
@@ -11,8 +11,8 @@
/include/ "skeleton.dtsi"
/ {
- model = "Atmel AT91SAM9G20 family SoC";
- compatible = "atmel,at91sam9g20";
+ model = "Atmel AT91SAM9260 family SoC";
+ compatible = "atmel,at91sam9260";
interrupt-parent = <&aic>;
aliases {
@@ -36,7 +36,7 @@
};
memory {
- reg = <0x20000000 0x08000000>;
+ reg = <0x20000000 0x04000000>;
};
ahb {
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
dissimilarity index 95%
index 799ad18..0eb1a75 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -1,239 +1,18 @@
-/*
- * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
- *
- * Copyright (C) 2011 Atmel,
- * 2011 Nicolas Ferre <nicolas.ferre at atmel.com>,
- * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
- model = "Atmel AT91SAM9G20 family SoC";
- compatible = "atmel,at91sam9g20";
- interrupt-parent = <&aic>;
-
- aliases {
- serial0 = &dbgu;
- serial1 = &usart0;
- serial2 = &usart1;
- serial3 = &usart2;
- serial4 = &usart3;
- serial5 = &usart4;
- serial6 = &usart5;
- gpio0 = &pioA;
- gpio1 = &pioB;
- gpio2 = &pioC;
- tcb0 = &tcb0;
- tcb1 = &tcb1;
- };
- cpus {
- cpu at 0 {
- compatible = "arm,arm926ejs";
- };
- };
-
- memory {
- reg = <0x20000000 0x08000000>;
- };
-
- ahb {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- apb {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- aic: interrupt-controller at fffff000 {
- #interrupt-cells = <2>;
- compatible = "atmel,at91rm9200-aic";
- interrupt-controller;
- interrupt-parent;
- reg = <0xfffff000 0x200>;
- };
-
- ramc0: ramc at ffffea00 {
- compatible = "atmel,at91sam9260-sdramc";
- reg = <0xffffea00 0x200>;
- };
-
- pmc: pmc at fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
- reg = <0xfffffc00 0x100>;
- };
-
- rstc at fffffd00 {
- compatible = "atmel,at91sam9260-rstc";
- reg = <0xfffffd00 0x10>;
- };
-
- shdwc at fffffd10 {
- compatible = "atmel,at91sam9260-shdwc";
- reg = <0xfffffd10 0x10>;
- };
-
- pit: timer at fffffd30 {
- compatible = "atmel,at91sam9260-pit";
- reg = <0xfffffd30 0xf>;
- interrupts = <1 4>;
- };
-
- tcb0: timer at fffa0000 {
- compatible = "atmel,at91rm9200-tcb";
- reg = <0xfffa0000 0x100>;
- interrupts = <17 4 18 4 19 4>;
- };
-
- tcb1: timer at fffdc000 {
- compatible = "atmel,at91rm9200-tcb";
- reg = <0xfffdc000 0x100>;
- interrupts = <26 4 27 4 28 4>;
- };
-
- pioA: gpio at fffff400 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <2 4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
-
- pioB: gpio at fffff600 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <3 4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
-
- pioC: gpio at fffff800 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <4 4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
-
- dbgu: serial at fffff200 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffff200 0x200>;
- interrupts = <1 4>;
- status = "disabled";
- };
-
- usart0: serial at fffb0000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffb0000 0x200>;
- interrupts = <6 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart1: serial at fffb4000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffb4000 0x200>;
- interrupts = <7 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart2: serial at fffb8000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffb8000 0x200>;
- interrupts = <8 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart3: serial at fffd0000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffd0000 0x200>;
- interrupts = <23 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart4: serial at fffd4000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffd4000 0x200>;
- interrupts = <24 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- usart5: serial at fffd8000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfffd8000 0x200>;
- interrupts = <25 4>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "disabled";
- };
-
- macb0: ethernet at fffc4000 {
- compatible = "cdns,at32ap7000-macb", "cdns,macb";
- reg = <0xfffc4000 0x100>;
- interrupts = <21 4>;
- status = "disabled";
- };
-
- usb1: gadget at fffa4000 {
- compatible = "atmel,at91rm9200-udc";
- reg = <0xfffa4000 0x4000>;
- interrupts = <10 4>;
- status = "disabled";
- };
- };
-
- nand0: nand at 40000000 {
- compatible = "atmel,at91rm9200-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x40000000 0x10000000
- 0xffffe800 0x200
- >;
- atmel,nand-addr-offset = <21>;
- atmel,nand-cmd-offset = <22>;
- gpios = <&pioC 13 0
- &pioC 14 0
- 0
- >;
- status = "disabled";
- };
-
- usb0: ohci at 00500000 {
- compatible = "atmel,at91rm9200-ohci", "usb-ohci";
- reg = <0x00500000 0x100000>;
- interrupts = <20 4>;
- status = "disabled";
- };
- };
-
- i2c at 0 {
- compatible = "i2c-gpio";
- gpios = <&pioA 23 0 /* sda */
- &pioA 24 0 /* scl */
- >;
- i2c-gpio,sda-open-drain;
- i2c-gpio,scl-open-drain;
- i2c-gpio,delay-us = <2>; /* ~100 kHz */
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-};
+/*
+ * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9260.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G20 family SoC";
+ compatible = "atmel,at91sam9g20";
+
+ memory {
+ reg = <0x20000000 0x08000000>;
+ };
+};
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 0da66ca..0c2336c 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -14,6 +14,7 @@ initrd_phys-y := 0x20410000
endif
# Keep dtb files sorted alphabetically for each SoC
+# sam9260
# sam9g20
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
# sam9g45
--
1.7.9.1
More information about the linux-arm-kernel
mailing list