[PATCH] arm: ep93xx: use gpio_led_register_device

[Ryan Mallon]

On 05/04/12 03:42, H Hartley Sweeten wrote:

> Use gpio_led_register_device to register the two leds connected to
> the ep93xx.
> 
> Add a SOC_EP93XX Kconfig option for common options needed by ep93xx
> and use that option to select LEDS_GPIO_REGISTER.
> 
> Signed-off-by: Hartley Sweeten <hsweeten at visionengravers.com>
> Cc: Ryan Mallon <rmallon at gmail.com>

Hi Hartley,

Just a couple of comments below.

~Ryan

> ---
> 
>  arch/arm/mach-ep93xx/Kconfig |   12 ++++++++++++
>  arch/arm/mach-ep93xx/core.c  |   16 ++++------------
>  2 files changed, 16 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
> index 97a2493..b27a8ad 100644
> --- a/arch/arm/mach-ep93xx/Kconfig
> +++ b/arch/arm/mach-ep93xx/Kconfig
> @@ -2,6 +2,10 @@ if ARCH_EP93XX
>  
>  menu "Cirrus EP93xx Implementation Options"
>  
> +config SOC_EP93XX
> +	bool
> +	select LEDS_GPIO_REGISTER
> +


So, this option is currently just used to indirectly select
LEDS_GPIO_REGISTER. Do you have plans for it to select other things?
Otherwise, its just a bunch of extra Kconfig lines for not much benefit.

>  config CRUNCH
>  	bool "Support for MaverickCrunch"
>  	help
> @@ -48,12 +52,14 @@ endchoice
>  config MACH_ADSSPHERE
>  	bool "Support ADS Sphere"
>  	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
> +	select SOC_EP93XX
>  	help
>  	  Say 'Y' here if you want your kernel to support the ADS
>  	  Sphere board.
>  
>  config MACH_EDB93XX
>  	bool
> +	select SOC_EP93XX
>  
>  config MACH_EDB9301
>  	bool "Support Cirrus Logic EDB9301"
> @@ -122,12 +128,14 @@ config MACH_EDB9315A
>  config MACH_GESBC9312
>  	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
>  	bool "Support Glomation GESBC-9312-sx"
> +	select SOC_EP93XX
>  	help
>  	  Say 'Y' here if you want your kernel to support the Glomation
>  	  GESBC-9312-sx board.
>  
>  config MACH_MICRO9
>  	bool
> +	select SOC_EP93XX
>  
>  config MACH_MICRO9H
>  	bool "Support Contec Micro9-High"
> @@ -164,6 +172,7 @@ config MACH_MICRO9S
>  config MACH_SIM_ONE
>          bool "Support Simplemachines Sim.One board"
>          depends on EP93XX_SDCE0_PHYS_OFFSET
> +	select SOC_EP93XX


The existing whitespace here is using spaces instead of tabs. If the
result looks terrible (not aligned) then we should maybe do a separate
patch to clean up the crappy whitespace.

>          help
>            Say 'Y' here if you want your kernel to support the
>            Simplemachines Sim.One board.
> @@ -171,6 +180,7 @@ config MACH_SIM_ONE
>  config MACH_SNAPPER_CL15
>  	bool "Support Bluewater Systems Snapper CL15 Module"
>  	depends on EP93XX_SDCE0_PHYS_OFFSET
> +	select SOC_EP93XX
>  	help
>  	  Say 'Y' here if you want your kernel to support the Bluewater
>  	  Systems Snapper CL15 Module.
> @@ -178,6 +188,7 @@ config MACH_SNAPPER_CL15
>  config MACH_TS72XX
>  	bool "Support Technologic Systems TS-72xx SBC"
>  	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
> +	select SOC_EP93XX
>  	help
>  	  Say 'Y' here if you want your kernel to support the
>  	  Technologic Systems TS-72xx board.
> @@ -185,6 +196,7 @@ config MACH_TS72XX
>  config MACH_VISION_EP9307
>  	bool "Support Vision Engraving Systems EP9307 SoM"
>  	depends on EP93XX_SDCE0_PHYS_OFFSET
> +	select SOC_EP93XX
>  	help
>  	  Say 'Y' here if you want your kernel to support the
>  	  Vision Engraving Systems EP9307 SoM.
> diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
> index 8d25895..257a124 100644
> --- a/arch/arm/mach-ep93xx/core.c
> +++ b/arch/arm/mach-ep93xx/core.c
> @@ -513,7 +513,7 @@ void __init ep93xx_register_spi(struct ep93xx_spi_info *info,
>  /*************************************************************************
>   * EP93xx LEDs
>   *************************************************************************/
> -static struct gpio_led ep93xx_led_pins[] = {
> +static const struct gpio_led ep93xx_led_pins[] __initconst = {


This fix, and related changes are not mentioned in the changelog.

>  	{
>  		.name	= "platform:grled",
>  		.gpio	= EP93XX_GPIO_LINE_GRLED,
> @@ -523,20 +523,11 @@ static struct gpio_led ep93xx_led_pins[] = {
>  	},
>  };
>  
> -static struct gpio_led_platform_data ep93xx_led_data = {
> +static const struct gpio_led_platform_data ep93xx_led_data __initconst = {
>  	.num_leds	= ARRAY_SIZE(ep93xx_led_pins),
>  	.leds		= ep93xx_led_pins,
>  };
>  
> -static struct platform_device ep93xx_leds = {
> -	.name		= "leds-gpio",
> -	.id		= -1,
> -	.dev		= {
> -		.platform_data	= &ep93xx_led_data,
> -	},
> -};
> -
> -
>  /*************************************************************************
>   * EP93xx pwm peripheral handling
>   *************************************************************************/
> @@ -889,8 +880,9 @@ void __init ep93xx_init_devices(void)
>  
>  	platform_device_register(&ep93xx_rtc_device);
>  	platform_device_register(&ep93xx_ohci_device);
> -	platform_device_register(&ep93xx_leds);
>  	platform_device_register(&ep93xx_wdt_device);
> +
> +	gpio_led_register_device(-1, &ep93xx_led_data);
>  }
>  
>  void ep93xx_restart(char mode, const char *cmd)