[PATCH 2/5] ARM: AT91: IIO: Add AT91 ADC driver.
Maxime Ripard
maxime.ripard at free-electrons.com
Mon Apr 9 11:39:20 EDT 2012
Hi,
Le 07/04/2012 05:27, Jean-Christophe PLAGNIOL-VILLARD a écrit :
> On 18:01 Thu 05 Apr , Maxime Ripard wrote:
>> Add the IIO driver for the AT91 ADCs. It only supports and has
>> been tested on the SAM9G20 evaluation boards, but support for
>> other boards will come eventually.
>>
>> This ADC is a multi-channel ADC with support for both hardware
>> and software triggers.
>>
>> This first version only supports software triggers.
>>
>> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
>>
>> Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
>> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
>> Cc: Patrice Vilchez <patrice.vilchez at atmel.com>
>> Cc: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
>> Cc: Jonathan Cameron <jic23 at cam.ac.uk>
>> ---
>> drivers/staging/iio/adc/Kconfig | 6 +
>> drivers/staging/iio/adc/Makefile | 1 +
>> drivers/staging/iio/adc/at91_adc.c | 382 ++++++++++++++++++++++++++++++++++++
>> 3 files changed, 389 insertions(+), 0 deletions(-)
>> create mode 100644 drivers/staging/iio/adc/at91_adc.c
>>
>> diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
>> index 592eabd..1494838 100644
>> --- a/drivers/staging/iio/adc/Kconfig
>> +++ b/drivers/staging/iio/adc/Kconfig
>> @@ -169,6 +169,12 @@ config AD7280
>> To compile this driver as a module, choose M here: the
>> module will be called ad7280a
>>
>> +config AT91_ADC
>> + tristate "Atmel AT91 ADC"
>> + depends on SYSFS && ARCH_AT91
>> + help
>> + Say yes here to build support for Atmel AT91 ADC.
>> +
>> config MAX1363
>> tristate "Maxim max1363 ADC driver"
>> depends on I2C
>> diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile
>> index f83ab95..8cb6d1c 100644
>> --- a/drivers/staging/iio/adc/Makefile
>> +++ b/drivers/staging/iio/adc/Makefile
>> @@ -38,3 +38,4 @@ obj-$(CONFIG_ADT7310) += adt7310.o
>> obj-$(CONFIG_ADT7410) += adt7410.o
>> obj-$(CONFIG_AD7280) += ad7280a.o
>> obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
>> +obj-$(CONFIG_AT91_ADC) += at91_adc.o
>> diff --git a/drivers/staging/iio/adc/at91_adc.c b/drivers/staging/iio/adc/at91_adc.c
>> new file mode 100644
>> index 0000000..c76516a
>> --- /dev/null
>> +++ b/drivers/staging/iio/adc/at91_adc.c
>> @@ -0,0 +1,382 @@
>> +/*
>> + * Driver for the ADC present in the Atmel AT91 evaluation boards.
>> + *
>> + * Copyright 2011 Free Electrons
>> + *
>> + * Licensed under the GPLv2 or later.
>> + */
>> +
>> +#include <linux/bitmap.h>
>> +#include <linux/bitops.h>
>> +#include <linux/clk.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/jiffies.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/sched.h>
>> +#include <linux/slab.h>
>> +#include <linux/wait.h>
>> +
>> +#include "../iio.h"
>> +#include <linux/platform_data/at91_adc.h>
>> +
>> +#include <mach/at91_adc.h>
>> +#include <mach/cpu.h>
>> +
>> +/**
>> + * struct at91_adc_desc - description of the ADC on the board
>> + * @clock: ADC clock as specified by the datasheet, in Hz.
>> + * @clock_name Name of the ADC clock as defined in the clock tree
>> + * @num_channels: global number of channels available on the board (to
>> + specify which channels are indeed in use on the
>> + board, see the channels_used bitmask in the platform
>> + data)
>> + * @startup_time: startup time of the ADC in microseconds
>> + */
>> +struct at91_adc_desc {
>> + u32 clock;
>> + char *clock_name;
>> + u8 num_channels;
>> + u8 startup_time;
>> +};
>> +
>> +struct at91_adc_state {
>> + unsigned long channels_mask;
>> + struct clk *clk;
>> + bool done;
>> + struct at91_adc_desc *desc;
>> + int irq;
>> + u16 last_value;
>> + struct mutex lock;
>> + void __iomem *reg_base;
>> + u32 vref_mv;
>> + wait_queue_head_t wq_data_avail;
>> +};
>> +
>> +static struct at91_adc_desc at91_adc_desc_sam9g20 = {
>> + .clock = 5000000,
> why 5Mhz?
This is the value given by the datasheet of the G20 SoC.
>> + .clock_name = "adc_clk",
>> + .num_channels = 4,
>> + .startup_time = 10,
>> +};
>> +
> this is soc specific nedd to be in the soc not in the driver
Some time ago, Nicolas Ferre asked me to move the SoC specific part to
the driver, mostly because of two things:
* *_devices.c files were suppose to disappear with the DT
* Triggers are not all supported by the driver, so only the driver
knows which triggers it can expose (pen-down or periodic triggers for
the G45 are not supported for example). This can't be done through the
SoC files.
>> +static int at91_adc_select_soc(struct at91_adc_state *st)
>> +{
>> + if (cpu_is_at91sam9g20()) {
>> + st->desc = &at91_adc_desc_sam9g20;
>> + return 0;
>> + }
>> +
>> + return -ENODEV;
>> +}
> ditto
>> +
>
>> +
>> +static int __devinit at91_adc_probe(struct platform_device *pdev)
>> +{
>> + unsigned int prsc, mstrclk, ticks;
>> + int ret;
>> + struct iio_dev *idev;
>> + struct at91_adc_state *st;
>> + struct resource *res;
>> + struct at91_adc_data *pdata = pdev->dev.platform_data;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + if (!res) {
>> + dev_err(&pdev->dev, "No resource defined\n");
>> + ret = -ENXIO;
>> + goto error_ret;
>> + }
>> +
>> + idev = iio_allocate_device(sizeof(struct at91_adc_state));
>> + if (idev == NULL) {
>> + ret = -ENOMEM;
>> + goto error_ret;
>> + }
>> +
>> + platform_set_drvdata(pdev, idev);
>> +
>> + idev->dev.parent = &pdev->dev;
>> + idev->name = dev_name(&pdev->dev);
>> + idev->modes = INDIO_DIRECT_MODE;
>> + idev->info = &at91_adc_info;
>> +
>> + st = iio_priv(idev);
>> + ret = at91_adc_select_soc(st);
>> + if (ret) {
>> + dev_err(&pdev->dev, "SoC unknown\n");
>> + goto error_free_device;
>> + }
>> +
>> + st->irq = platform_get_irq(pdev, 0);
>> + if (st->irq < 0) {
>> + dev_err(&pdev->dev, "No IRQ ID is designated\n");
>> + ret = -ENODEV;
>> + goto error_free_device;
>> + }
>> +
>> + if (!request_mem_region(res->start, resource_size(res),
>> + "AT91 adc registers")) {
>> + dev_err(&pdev->dev, "Resources are unavailable.\n");
>> + ret = -EBUSY;
>> + goto error_free_device;
>> + }
>> +
>> + st->reg_base = ioremap(res->start, resource_size(res));
>> + if (!st->reg_base) {
>> + dev_err(&pdev->dev, "Failed to map registers.\n");
>> + ret = -ENOMEM;
>> + goto error_release_mem;
>> + }
>> +
>> + /*
>> + * Disable all IRQs before setting up the handler
>> + */
>> + at91_adc_reg_write(st, AT91_ADC_CR, AT91_ADC_SWRST);
>> + at91_adc_reg_write(st, AT91_ADC_IDR, 0xFFFFFFFF);
>> + ret = request_irq(st->irq,
>> + at91_adc_eoc_trigger,
>> + 0,
>> + pdev->dev.driver->name,
>> + idev);
>> + if (ret) {
>> + dev_err(&pdev->dev, "Failed to allocate IRQ.\n");
>> + goto error_unmap_reg;
>> + }
>> +
>> + st->clk = clk_get(&pdev->dev, st->desc->clock_name);
> use a fixed clock name
I can't. The clock name is "adc_clk" for the G20, "tsc_clk" for the G45.
>> + if (IS_ERR(st->clk)) {
>> + dev_err(&pdev->dev, "Failed to get the clock.\n");
>> + ret = PTR_ERR(st->clk);
>> + goto error_free_irq;
>> + }
>> +
> use clk_prepare & co
Ok, I will look into this.
>> + clk_enable(st->clk);
>> + mstrclk = clk_get_rate(st->clk);
>> +
>> + if (!pdata) {
>> + dev_err(&pdev->dev, "No platform data available.\n");
>> + ret = -EINVAL;
>> + goto error_free_clk;
>> + }
> need to be check first
Ok
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
More information about the linux-arm-kernel
mailing list