[PATCH] ARM: OMAP: sram: fix BUG in dpll code for !PM case

[Tony Lindgren]

* Grazvydas Ignotas <notasas at gmail.com> [120406 14:56]:
> _omap3_sram_configure_core_dpll is called when SDRC is reprogrammed,
> which is done regardless of CONFIG_PM setting, so we always need it's
> setup code too. Without this, we hit a BUG() on OMAP3 when kernel is
> built without CONFIG_PM:
> 
> Reprogramming SDRC clock to 332000000 Hz
> ------------[ cut here ]------------
> kernel BUG at arch/arm/plat-omap/sram.c:342!
> Internal error: Oops - BUG: 0 [#1] ARM
> ...
> [<c001c694>] (omap3_configure_core_dpll+0x68/0x6c) from [<c001b2dc>] (omap3_core_dpll_m2_set_rate+0x1)
> [<c001b2dc>] (omap3_core_dpll_m2_set_rate+0x138/0x1b0) from [<c001a478>] (omap2_clk_set_rate+0x14/0x2)
> [<c001a478>] (omap2_clk_set_rate+0x14/0x20) from [<c001c9dc>] (clk_set_rate+0x54/0x74)
> [<c001c9dc>] (clk_set_rate+0x54/0x74) from [<c022b9c8>] (omap_sdrc_init+0x70/0x90)
> [<c022b9c8>] (omap_sdrc_init+0x70/0x90) from [<c022f178>] (omap3pandora_init+0x11c/0x164)
> [<c022f178>] (omap3pandora_init+0x11c/0x164) from [<c022849c>] (customize_machine+0x20/0x28)
> [<c022849c>] (customize_machine+0x20/0x28) from [<c0225810>] (do_one_initcall+0xa0/0x16c)
> [<c0225810>] (do_one_initcall+0xa0/0x16c) from [<c02259e0>] (kernel_init+0x104/0x1ac)
> [<c02259e0>] (kernel_init+0x104/0x1ac) from [<c0009cec>] (kernel_thread_exit+0x0/0x8)

Looks like this was caused by the added ifdef CONFIG_PM from
commit 3231fc88 (OMAP3: PM: restore SRAM functions after off-mode).

Tony