[PATCH 3/7] drivers/gpio: gpio-nomadik: Apply Device Tree bindings
Lee Jones
lee.jones at linaro.org
Thu Apr 5 06:25:30 EDT 2012
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
arch/arm/boot/dts/db8500.dtsi | 18 +++++++++++++++
arch/arm/boot/dts/snowball.dts | 10 ++++----
arch/arm/mach-ux500/board-mop500.c | 12 ++++++++++
drivers/gpio/gpio-nomadik.c | 41 +++++++++++++++++++++++++++++++++--
4 files changed, 73 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi
index d73dce6..b8591fa 100644
--- a/arch/arm/boot/dts/db8500.dtsi
+++ b/arch/arm/boot/dts/db8500.dtsi
@@ -61,6 +61,8 @@
interrupts = <0 119 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <0>;
};
gpio1: gpio at 8012e080 {
@@ -70,6 +72,8 @@
interrupts = <0 120 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <1>;
};
gpio2: gpio at 8000e000 {
@@ -79,6 +83,8 @@
interrupts = <0 121 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <2>;
};
gpio3: gpio at 8000e080 {
@@ -88,6 +94,8 @@
interrupts = <0 122 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <3>;
};
gpio4: gpio at 8000e100 {
@@ -97,6 +105,8 @@
interrupts = <0 123 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <4>;
};
gpio5: gpio at 8000e180 {
@@ -106,6 +116,8 @@
interrupts = <0 124 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <5>;
};
gpio6: gpio at 8011e000 {
@@ -115,6 +127,8 @@
interrupts = <0 125 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <6>;
};
gpio7: gpio at 8011e080 {
@@ -124,6 +138,8 @@
interrupts = <0 126 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <7>;
};
gpio8: gpio at a03fe000 {
@@ -133,6 +149,8 @@
interrupts = <0 127 0x4>;
supports-sleepmode;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <8>;
};
usb at a03e0000 {
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 359c6d6..738959d 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -30,35 +30,35 @@
wakeup = <1>;
linux,code = <2>;
label = "userpb";
- gpios = <&gpio1 0>;
+ gpios = <&gpio1 0 0>;
};
button at 2 {
debounce_interval = <50>;
wakeup = <1>;
linux,code = <3>;
label = "userpb";
- gpios = <&gpio4 23>;
+ gpios = <&gpio4 23 0>;
};
button at 3 {
debounce_interval = <50>;
wakeup = <1>;
linux,code = <4>;
label = "userpb";
- gpios = <&gpio4 23>;
+ gpios = <&gpio4 24 0>;
};
button at 4 {
debounce_interval = <50>;
wakeup = <1>;
linux,code = <5>;
label = "userpb";
- gpios = <&gpio5 1>;
+ gpios = <&gpio5 1 0>;
};
button at 5 {
debounce_interval = <50>;
wakeup = <1>;
linux,code = <6>;
label = "userpb";
- gpios = <&gpio5 2>;
+ gpios = <&gpio5 2 0>;
};
};
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 4d4aeda..a47d6bd 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -753,10 +753,22 @@ MACHINE_END
#ifdef CONFIG_MACH_UX500_DT
struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
+ /* Requires DMA and call-back bindings. */
OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
+ /* Requires DMA bindings. */
OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
+ /* Requires clock name bindings. */
+ OF_DEV_AUXDATA("stmicroelectronics,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
+ OF_DEV_AUXDATA("stmicroelectronics,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
+ OF_DEV_AUXDATA("stmicroelectronics,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
+ OF_DEV_AUXDATA("stmicroelectronics,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
+ OF_DEV_AUXDATA("stmicroelectronics,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
+ OF_DEV_AUXDATA("stmicroelectronics,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
+ OF_DEV_AUXDATA("stmicroelectronics,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
+ OF_DEV_AUXDATA("stmicroelectronics,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
+ OF_DEV_AUXDATA("stmicroelectronics,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
{},
};
diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index 839624f..750a971 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -1071,6 +1071,7 @@ void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up)
static int __devinit nmk_gpio_probe(struct platform_device *dev)
{
struct nmk_gpio_platform_data *pdata = dev->dev.platform_data;
+ struct device_node *np = dev->dev.of_node;
struct nmk_gpio_chip *nmk_chip;
struct gpio_chip *chip;
struct resource *res;
@@ -1079,8 +1080,28 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
int irq;
int ret;
- if (!pdata)
+ if (!pdata && !np) {
+ dev_err(&dev->dev, "No platform data or device tree found\n");
return -ENODEV;
+ }
+
+ if (np) {
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ if (of_get_property(np, "supports-sleepmode", NULL))
+ pdata->supports_sleepmode = true;
+
+ if (of_property_read_u32(np, "gpio-bank", &dev->id)) {
+ dev_err(&dev->dev, "gpio-bank property not found\n");
+ ret = -EINVAL;
+ goto out_dt;
+ }
+
+ pdata->first_gpio = dev->id * NMK_GPIO_PER_CHIP;
+ pdata->num_gpio = NMK_GPIO_PER_CHIP;
+ }
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!res) {
@@ -1117,6 +1138,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
ret = -ENOMEM;
goto out_clk;
}
+
/*
* The virt address in nmk_chip->addr is in the nomadik register space,
* so we can simply convert the resource address, without remapping
@@ -1139,6 +1161,8 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
chip->dev = &dev->dev;
chip->owner = THIS_MODULE;
+ chip->of_node = np;
+
ret = gpiochip_add(&nmk_chip->chip);
if (ret)
goto out_free;
@@ -1146,12 +1170,13 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
BUG_ON(nmk_chip->bank >= ARRAY_SIZE(nmk_gpio_chips));
nmk_gpio_chips[nmk_chip->bank] = nmk_chip;
+
platform_set_drvdata(dev, nmk_chip);
nmk_gpio_init_irq(nmk_chip);
- dev_info(&dev->dev, "at address %p\n",
- nmk_chip->addr);
+ dev_info(&dev->dev, "at address %p\n", nmk_chip->addr);
+
return 0;
out_free:
@@ -1164,13 +1189,23 @@ out_release:
out:
dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
pdata->first_gpio, pdata->first_gpio+31);
+out_dt:
+ if (np)
+ kfree(pdata);
+
return ret;
}
+static const struct of_device_id nmk_gpio_match[] = {
+ { .compatible = "stmicroelectronics,nomadik-gpio", },
+ {}
+};
+
static struct platform_driver nmk_gpio_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "gpio",
+ .of_match_table = nmk_gpio_match,
},
.probe = nmk_gpio_probe,
};
--
1.7.9.1
More information about the linux-arm-kernel
mailing list