[PATCH] ARM: mx53: fix pad definitions for MX53_PAD_EIM_D28__I2C1_SDA and MX53_PAD_GPIO_8__CAN1_RXCAN

[Lothar Waßmann]

MX53_PAD_EIM_D28__I2C1_SDA uses an undefined PAD_CTRL_I2C
MX53_PAD_GPIO_8__CAN1_RXCAN has an incorrect input_select value

Signed-off-by: Lothar Waßmann <LW at KARO-electronics.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx53.h |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
index 527f8fe..9761e00 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -573,7 +573,7 @@
 #define MX53_PAD_EIM_D28__UART2_CTS			IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
 #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO		IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D28__CSPI_MOSI			IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__I2C1_SDA			IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, PAD_CTRL_I2C)
+#define MX53_PAD_EIM_D28__I2C1_SDA			IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D28__IPU_EXT_TRIG			IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D28__IPU_DI0_PIN13			IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D29__EMI_WEIM_D_29			IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL)
@@ -1187,7 +1187,7 @@
 #define MX53_PAD_GPIO_8__ESAI1_TX5_RX0			IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL)
 #define MX53_PAD_GPIO_8__GPIO1_8			IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX53_PAD_GPIO_8__EPIT2_EPITO			IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__CAN1_RXCAN			IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__CAN1_RXCAN			IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 2, NO_PAD_CTRL)
 #define MX53_PAD_GPIO_8__UART2_RXD_MUX			IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL)
 #define MX53_PAD_GPIO_8__FIRI_TXD			IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL)
 #define MX53_PAD_GPIO_8__SPDIF_SRCLK			IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL)
-- 
1.7.2.5