[PATCH 3/6] omap4: powerdomain: Use intended PWRSTS_* flags instead of values

[Santosh Shilimkar]

IVAHD and ABE power domain logic state is populated using directly
value instead of the capability flags.

Fix the same.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
---
 arch/arm/mach-omap2/powerdomains44xx_data.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c
index 96cde98..daee255 100644
--- a/arch/arm/mach-omap2/powerdomains44xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains44xx_data.c
@@ -80,7 +80,7 @@ static struct powerdomain abe_44xx_pwrdm = {
 	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_OFF_RET_INA_ON,
-	.pwrsts_logic_ret = PWRDM_POWER_OFF,
+	.pwrsts_logic_ret = PWRSTS_OFF,
 	.banks		  = 2,
 	.pwrsts_mem_ret	= {
 		[0] = PWRDM_POWER_RET,	/* aessmem */
@@ -227,7 +227,7 @@ static struct powerdomain ivahd_44xx_pwrdm = {
 	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_OFF_RET_INA_ON,
-	.pwrsts_logic_ret = PWRDM_POWER_OFF,
+	.pwrsts_logic_ret = PWRSTS_OFF,
 	.banks		  = 4,
 	.pwrsts_mem_ret	= {
 		[0] = PWRDM_POWER_OFF,	/* hwa_mem */
-- 
1.6.0.4