[PATCH] OMAP2/3: PM: remove unnecessary wakeup/sleep dependency clear

[Paul Walmsley]

The OMAP2 and OMAP3 PM code clears clockdomain wakeup and sleep
dependencies.  This is unnecessary after commit
6f7f63cc9adf3192e6fcac4e8bed5cc10fd924aa ("OMAP clockdomain:
initialize clockdomain registers when the clockdomain layer starts")
which clears these dependencies during clockdomain init.

Signed-off-by: Paul Walmsley <paul at pwsan.com>
Cc: Kevin Hilman <khilman at deeprootsystems.com>
---
Full-chip retention idle entry tested on OMAP35xx Beagleboard.

 arch/arm/mach-omap2/pm24xx.c |    8 +-------
 arch/arm/mach-omap2/pm34xx.c |   15 ---------------
 2 files changed, 1 insertions(+), 22 deletions(-)

diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 97feb3a..10f8747 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -363,9 +363,6 @@ static const struct platform_suspend_ops __initdata omap_pm_ops;
 /* XXX This function should be shareable between OMAP2xxx and OMAP3 */
 static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
 {
-	clkdm_clear_all_wkdeps(clkdm);
-	clkdm_clear_all_sleepdeps(clkdm);
-
 	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
 		omap2_clkdm_allow_idle(clkdm);
 	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
@@ -411,10 +408,7 @@ static void __init prcm_setup_regs(void)
 	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
 	omap2_clkdm_sleep(gfx_clkdm);
 
-	/*
-	 * Clear clockdomain wakeup dependencies and enable
-	 * hardware-supervised idle for all clkdms
-	 */
+	/* Enable hardware-supervised idle for all clkdms */
 	clkdm_for_each(clkdms_setup, NULL);
 	clkdm_add_wkdep(mpu_clkdm, wkup_clkdm);
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index a4aa192..0eb9738 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -694,21 +694,6 @@ static void __init prcm_setup_regs(void)
 	u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
 					OMAP3630_GRPSEL_UART4_MASK : 0;
 
-
-	/* XXX Reset all wkdeps. This should be done when initializing
-	 * powerdomains */
-	omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
-	omap2_prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
-	omap2_prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
-	omap2_prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
-	omap2_prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
-	omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
-	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		omap2_prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
-		omap2_prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
-	} else
-		omap2_prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
-
 	/*
 	 * Enable interface clock autoidle for all modules.
 	 * Note that in the long run this should be done by clockfw
-- 
1.7.2.3