[PATCH 1/3] ARM: mach-mx5: Fix build for mx53_loco and mx53_smd

Richard Zhao richard.zhao at freescale.com
Thu Jan 27 04:30:44 EST 2011


Hi Fabio,

Sorry I didn't see your patch. I just sent out a patch to include all pad
configure for imx53_loco.

I have some comments below.

On Thu, Jan 27, 2011 at 08:30:09AM +0100, Sascha Hauer wrote:
> Yong,
> 
> Can you ack these?
> 
> Sascha
> 
> On Tue, Jan 25, 2011 at 01:08:33PM -0200, Fabio Estevam wrote:
> > Commit 816ad74 (ARM: i.MX53: Add full iomux support for mx53) renamed some of the pad names.
> > 
> > Make the changes accordingly so that mx53_loco and mx53_cmd can build without errors.
> > 
> > Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> > ---
> >  arch/arm/mach-mx5/board-mx53_loco.c |   25 +++++++++++++------------
> >  arch/arm/mach-mx5/board-mx53_smd.c  |   24 ++++++++++++------------
> >  2 files changed, 25 insertions(+), 24 deletions(-)
> > 
> > diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
> > index d1348e0..dadc856 100644
> > --- a/arch/arm/mach-mx5/board-mx53_loco.c
> > +++ b/arch/arm/mach-mx5/board-mx53_loco.c
> > @@ -39,20 +39,21 @@
> >  #define LOCO_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
> >  
> >  static iomux_v3_cfg_t mx53_loco_pads[] = {
> > -	MX53_PAD_CSI0_D10__UART1_TXD,
> > -	MX53_PAD_CSI0_D11__UART1_RXD,
> > -	MX53_PAD_ATA_DIOW__UART1_TXD,
> > -	MX53_PAD_ATA_DMACK__UART1_RXD,
> > -
> > -	MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
> > -	MX53_PAD_ATA_DMARQ__UART2_TXD,
> > -	MX53_PAD_ATA_DIOR__UART2_RTS,
> > -	MX53_PAD_ATA_INTRQ__UART2_CTS,
> > -
> > -	MX53_PAD_ATA_CS_0__UART3_TXD,
> > -	MX53_PAD_ATA_CS_1__UART3_RXD,
> > -	MX53_PAD_ATA_DA_1__UART3_CTS,
> > -	MX53_PAD_ATA_DA_2__UART3_RTS,
> > +	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
> > +	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
> > +	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
> > +	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
So many Pad configured to uart1?
> > +
> > +	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
> > +	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
> > +	MX53_PAD_PATA_DIOR__UART2_RTS,
> > +	MX53_PAD_PATA_INTRQ__UART2_CTS,
> > +
> > +	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
> > +	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
> > +	MX53_PAD_PATA_DA_1__UART3_CTS,
> > +	MX53_PAD_PATA_DA_2__UART3_RTS,
LoCo don't have uart2 and uart3.
> > +
> >  };
> >  
> >  static const struct imxuart_platform_data mx53_loco_uart_data __initconst = {
> > diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
> > index 7970f7a..06070c5 100644
> > --- a/arch/arm/mach-mx5/board-mx53_smd.c
> > +++ b/arch/arm/mach-mx5/board-mx53_smd.c
> > @@ -39,20 +39,20 @@
> >  #define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
> >  
> >  static iomux_v3_cfg_t mx53_smd_pads[] = {
> > -	MX53_PAD_CSI0_D10__UART1_TXD,
> > -	MX53_PAD_CSI0_D11__UART1_RXD,
> > -	MX53_PAD_ATA_DIOW__UART1_TXD,
> > -	MX53_PAD_ATA_DMACK__UART1_RXD,
> > -
> > -	MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
> > -	MX53_PAD_ATA_DMARQ__UART2_TXD,
> > -	MX53_PAD_ATA_DIOR__UART2_RTS,
> > -	MX53_PAD_ATA_INTRQ__UART2_CTS,
> > -
> > -	MX53_PAD_ATA_CS_0__UART3_TXD,
> > -	MX53_PAD_ATA_CS_1__UART3_RXD,
> > -	MX53_PAD_ATA_DA_1__UART3_CTS,
> > -	MX53_PAD_ATA_DA_2__UART3_RTS,
> > +	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
> > +	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
> > +	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
> > +	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
same as above.

Thanks
Richard
> > +
> > +	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
> > +	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
> > +	MX53_PAD_PATA_DIOR__UART2_RTS,
> > +	MX53_PAD_PATA_INTRQ__UART2_CTS,
> > +
> > +	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
> > +	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
> > +	MX53_PAD_PATA_DA_1__UART3_CTS,
> > +	MX53_PAD_PATA_DA_2__UART3_RTS,
> >  };
> >  
> >  static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
> > -- 
> > 1.6.0.4
> > 
> > 
> > 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 




More information about the linux-arm-kernel mailing list