[PATCH 1/3] ARM: mach-mx5: Fix build for mx53_loco and mx53_smd

[Fabio Estevam]

Commit 816ad74 (ARM: i.MX53: Add full iomux support for mx53) renamed some of the pad names.

Make the changes accordingly so that mx53_loco and mx53_cmd can build without errors.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/mach-mx5/board-mx53_loco.c |   25 +++++++++++++------------
 arch/arm/mach-mx5/board-mx53_smd.c  |   24 ++++++++++++------------
 2 files changed, 25 insertions(+), 24 deletions(-)

diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index d1348e0..dadc856 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -39,20 +39,21 @@
 #define LOCO_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
 
 static iomux_v3_cfg_t mx53_loco_pads[] = {
-	MX53_PAD_CSI0_D10__UART1_TXD,
-	MX53_PAD_CSI0_D11__UART1_RXD,
-	MX53_PAD_ATA_DIOW__UART1_TXD,
-	MX53_PAD_ATA_DMACK__UART1_RXD,
-
-	MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
-	MX53_PAD_ATA_DMARQ__UART2_TXD,
-	MX53_PAD_ATA_DIOR__UART2_RTS,
-	MX53_PAD_ATA_INTRQ__UART2_CTS,
-
-	MX53_PAD_ATA_CS_0__UART3_TXD,
-	MX53_PAD_ATA_CS_1__UART3_RXD,
-	MX53_PAD_ATA_DA_1__UART3_CTS,
-	MX53_PAD_ATA_DA_2__UART3_RTS,
+	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
+	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
+	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
+	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
+
+	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
+	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
+	MX53_PAD_PATA_DIOR__UART2_RTS,
+	MX53_PAD_PATA_INTRQ__UART2_CTS,
+
+	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
+	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
+	MX53_PAD_PATA_DA_1__UART3_CTS,
+	MX53_PAD_PATA_DA_2__UART3_RTS,
+
 };
 
 static const struct imxuart_platform_data mx53_loco_uart_data __initconst = {
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index 7970f7a..06070c5 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -39,20 +39,20 @@
 #define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
 
 static iomux_v3_cfg_t mx53_smd_pads[] = {
-	MX53_PAD_CSI0_D10__UART1_TXD,
-	MX53_PAD_CSI0_D11__UART1_RXD,
-	MX53_PAD_ATA_DIOW__UART1_TXD,
-	MX53_PAD_ATA_DMACK__UART1_RXD,
-
-	MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
-	MX53_PAD_ATA_DMARQ__UART2_TXD,
-	MX53_PAD_ATA_DIOR__UART2_RTS,
-	MX53_PAD_ATA_INTRQ__UART2_CTS,
-
-	MX53_PAD_ATA_CS_0__UART3_TXD,
-	MX53_PAD_ATA_CS_1__UART3_RXD,
-	MX53_PAD_ATA_DA_1__UART3_CTS,
-	MX53_PAD_ATA_DA_2__UART3_RTS,
+	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
+	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
+	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
+	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
+
+	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
+	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
+	MX53_PAD_PATA_DIOR__UART2_RTS,
+	MX53_PAD_PATA_INTRQ__UART2_CTS,
+
+	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
+	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
+	MX53_PAD_PATA_DA_1__UART3_CTS,
+	MX53_PAD_PATA_DA_2__UART3_RTS,
 };
 
 static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
-- 
1.6.0.4