[PATCH v9 12/18] OMAP2, 3: DSS2: RFBI: create platform_driver, move init, exit to driver
Sumit Semwal
sumit.semwal at ti.com
Sat Jan 22 05:05:52 EST 2011
From: Senthilvadivu Guruswamy <svadivu at ti.com>
Hwmod adaptation design requires each of the DSS HW IP to be a platform driver.
So a platform_driver for RFBI is created and init exit methods are moved from core.c
to its driver probe,remove. pdev member has to be maintained by its own drivers.
RFBI platform driver is registered from inside omap_dss_probe, in the order desired.
Reviewed-by: Kevin Hilman <khilman at ti.com>
Tested-by: Kevin Hilman <khilman at ti.com>
Signed-off-by: Senthilvadivu Guruswamy <svadivu at ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal at ti.com>
---
drivers/video/omap2/dss/core.c | 8 ++--
drivers/video/omap2/dss/dss.h | 8 ++--
drivers/video/omap2/dss/rfbi.c | 110 ++++++++++++++++++++++++----------------
3 files changed, 74 insertions(+), 52 deletions(-)
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index bdb952f..d4b3da3 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -201,9 +201,9 @@ static int omap_dss_probe(struct platform_device *pdev)
/* keep clocks enabled to prevent context saves/restores during init */
dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
- r = rfbi_init();
+ r = rfbi_init_platform_driver();
if (r) {
- DSSERR("Failed to initialize rfbi\n");
+ DSSERR("Failed to initialize rfbi platform driver\n");
goto err_rfbi;
}
@@ -285,7 +285,7 @@ err_venc:
err_dispc:
dpi_exit();
err_dpi:
- rfbi_exit();
+ rfbi_uninit_platform_driver();
err_rfbi:
dss_uninit_platform_driver();
err_dss:
@@ -303,7 +303,7 @@ static int omap_dss_remove(struct platform_device *pdev)
venc_exit();
dispc_exit();
dpi_exit();
- rfbi_exit();
+ rfbi_uninit_platform_driver();
if (cpu_is_omap34xx()) {
dsi_exit();
sdi_exit();
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index c535ee1..0ba4bdb 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -428,8 +428,8 @@ static inline void venc_exit(void)
/* RFBI */
#ifdef CONFIG_OMAP2_DSS_RFBI
-int rfbi_init(void);
-void rfbi_exit(void);
+int rfbi_init_platform_driver(void);
+void rfbi_uninit_platform_driver(void);
void rfbi_dump_regs(struct seq_file *s);
int rfbi_configure(int rfbi_module, int bpp, int lines);
@@ -440,11 +440,11 @@ void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t);
unsigned long rfbi_get_max_tx_rate(void);
int rfbi_init_display(struct omap_dss_device *display);
#else
-static inline int rfbi_init(void)
+static inline int rfbi_init_platform_driver(void)
{
return 0;
}
-static inline void rfbi_exit(void)
+static inline void rfbi_uninit_platform_driver(void)
{
}
#endif
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 10a2ffe..a64e119 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -100,6 +100,7 @@ static int rfbi_convert_timings(struct rfbi_timings *t);
static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div);
static struct {
+ struct platform_device *pdev;
void __iomem *base;
unsigned long l4_khz;
@@ -957,50 +958,6 @@ void rfbi_dump_regs(struct seq_file *s)
#undef DUMPREG
}
-int rfbi_init(void)
-{
- u32 rev;
- u32 l;
-
- spin_lock_init(&rfbi.cmd_lock);
-
- init_completion(&rfbi.cmd_done);
- atomic_set(&rfbi.cmd_fifo_full, 0);
- atomic_set(&rfbi.cmd_pending, 0);
-
- rfbi.base = ioremap(RFBI_BASE, SZ_256);
- if (!rfbi.base) {
- DSSERR("can't ioremap RFBI\n");
- return -ENOMEM;
- }
-
- rfbi_enable_clocks(1);
-
- msleep(10);
-
- rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000;
-
- /* Enable autoidle and smart-idle */
- l = rfbi_read_reg(RFBI_SYSCONFIG);
- l |= (1 << 0) | (2 << 3);
- rfbi_write_reg(RFBI_SYSCONFIG, l);
-
- rev = rfbi_read_reg(RFBI_REVISION);
- printk(KERN_INFO "OMAP RFBI rev %d.%d\n",
- FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
-
- rfbi_enable_clocks(0);
-
- return 0;
-}
-
-void rfbi_exit(void)
-{
- DSSDBG("rfbi_exit\n");
-
- iounmap(rfbi.base);
-}
-
int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
{
int r;
@@ -1056,3 +1013,68 @@ int rfbi_init_display(struct omap_dss_device *dssdev)
dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
return 0;
}
+
+/* RFBI HW IP initialisation */
+static int omap_rfbihw_probe(struct platform_device *pdev)
+{
+ u32 rev;
+ u32 l;
+
+ rfbi.pdev = pdev;
+
+ spin_lock_init(&rfbi.cmd_lock);
+
+ init_completion(&rfbi.cmd_done);
+ atomic_set(&rfbi.cmd_fifo_full, 0);
+ atomic_set(&rfbi.cmd_pending, 0);
+
+ rfbi.base = ioremap(RFBI_BASE, SZ_256);
+ if (!rfbi.base) {
+ DSSERR("can't ioremap RFBI\n");
+ return -ENOMEM;
+ }
+
+ rfbi_enable_clocks(1);
+
+ msleep(10);
+
+ rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000;
+
+ /* Enable autoidle and smart-idle */
+ l = rfbi_read_reg(RFBI_SYSCONFIG);
+ l |= (1 << 0) | (2 << 3);
+ rfbi_write_reg(RFBI_SYSCONFIG, l);
+
+ rev = rfbi_read_reg(RFBI_REVISION);
+ printk(KERN_INFO "OMAP RFBI rev %d.%d\n",
+ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
+
+ rfbi_enable_clocks(0);
+
+ return 0;
+}
+
+static int omap_rfbihw_remove(struct platform_device *pdev)
+{
+ iounmap(rfbi.base);
+ return 0;
+}
+
+static struct platform_driver omap_rfbihw_driver = {
+ .probe = omap_rfbihw_probe,
+ .remove = omap_rfbihw_remove,
+ .driver = {
+ .name = "omap_rfbi",
+ .owner = THIS_MODULE,
+ },
+};
+
+int rfbi_init_platform_driver(void)
+{
+ return platform_driver_register(&omap_rfbihw_driver);
+}
+
+void rfbi_uninit_platform_driver(void)
+{
+ return platform_driver_unregister(&omap_rfbihw_driver);
+}
--
1.7.1
More information about the linux-arm-kernel
mailing list