[PATCH V5 00/63] Updating SPEAr Support
Viresh Kumar
viresh.kumar at st.com
Thu Jan 20 02:25:39 EST 2011
Following set of patches:
- updates SPEAr3xx, 6xx support
- Adds support for SPEAr13xx
- Removes Multiple defconfigs per machine family
Changes since V4:
- Following patch is added
SPEAr: Defining IOMEM(x) and updating declaration of MISC_BASE
- variables referring to register now have type void __iomem *, instead of u32 *
- using linux/gpio.h instead of mach/gpio.h in *evb files.
- return value of clk_get(), and clk_get_sys are checked using IS_ERR().
- unused routines removed from headsmp.S
- spear13*_pcie_port_is_host routines are declared static
- platsmp.c updated according to review comments.
- Added clk_round_rate routine() and used it to check possible rate before
calling cpufreq_notify_transition in cpufreq.c
- & removed before function names, while passing function pointer to other
routines.
Changes since V3:
- SPEAr13xx: gic init, smp and hotplug code updated w.r.t. latest linus/master
- Appending UL to VMALLOC_END Macros
- readl & writle _relaxed used instread _raw in uncompress.h
- infinite loop removed from arch_reset() in
mach-spear13xx/include/mach/system.h
- patch: ST-SPEAr13xx-Modified-static-mappings is broken into two patches.
Now, static mapping for SPEAr1310 RAS will be present only on 1310 machine.
- Updated commit message of: SPEAr Power Management: Added the support for
Standby mode
- Default ssp freq changed to 25MHz.
- patch: ST-SPEAr-13xx-Adding-support-for-SPEAr1310 is splitted into two
patches. Separate patch for 320 CAN is added.
- Wrapper routine spi_init() in spear*evb.c files is removed.
- routine i2c_register_board_devices() is renamed to
i2c_register_default_devices() in arch/arm/plat-spear/i2c_eval_board.c file
- Following patches are removed from this patchset, they will be added
separately:
ST-SPEAr-FSMC-Flexible-Static-Memory-Controller-NOR-.patch
- Following patches are already present in linus-next or already Acked, so they
are also removed from this patchset:
Newly-erased-page-read-workaround.patch
Changes since V2:
- Following patches are removed from this patchset, as they are still under
review:
ST SPEAr: PCIE gadget suppport
ST SPEAr13xx: Adding machine support for pci gadget
ST SPEAr: Add smi driver for serial NOR flash
ST SPEAr: Adding support for serial nor flash in all spear platforms
- Following patches are already present in linus-next, so they are also removed
from this patchset:
mtd/fsmc.h: including linux/io.h for definition of readl
Keyboard: Adding support for spear-keyboard
USB host: Adding USB ehci & ohci support for spear platform
- spear-keyboard machine support is updated according to updations in driver
(driver is already in linus-next)
- rtc driver is updated and ioctl routine is removed.
Changes since V1:
- sev definitions moved to system.h and removed from spear and omap archs
- bug fix added in system controller file sp810.h
- Review Comments incorporated
- Driver and machine support are divided into separate patches
- Nand Driver is removed from patch list as it is already floated by Linus
Walleij.
- Few later patches of SPEAr13xx Patches are merged with initial patches of
SPEAr13xx
- Smaller Defconfigs are used instead of large.
- Clock renaming & minor corrections are moved to clock specific patches from
peripheral machine support patches.
- Removed Commented code related to SPI
- [PATCH] Incrementing the ecc_pos array to contain 128 char - is removed from
list
- Board specific code is moved to *evb.c files from machine files for EMI NOR
- replaced readl with __raw_readl in uncompress.h in plat-spear/include/plat/
Rebased over linus: v2.6.37
e6f597a1425b5af64917be3448b29e2d5a585ac8
Bhupesh Sharma (1):
ST SPEAr 13xx : Adding support for SPEAr1310
Deepak Sikri (5):
ST SPEAr: Adding machine support for USB host
SPEAr Clock Framework: Adding support for PLL frequency change
SPEAr Power Management: Added the support for Standby mode.
SPEAr CPU freq: Adding support for CPU Freq framework
ST SPEAr13xx: Adding CPU hotplug support added for SMP platforms
Pratyush Anand (1):
ST SPEAr: Added PCIE host controller base driver support.
Rajeev Kumar (4):
rtc: Adding support for spear rtc
ST SPEAr: Adding machine support for rtc-spear
ST SPEAr: adding support for synopsis i2c designware
ST SPEAr: Adding machine support for keyboard
Ryan Mallon (5):
SPEAr3xx: Make local structures static
SPEAR3xx: Rename register/irq defines to remove naming conflicts
SPEAr3xx: Rework pmx_dev code to remove conflicts
SPEAr3xx: Rework KConfig to allow all boards to be compiled in
SPEAr3xx: Replace defconfigs with single unified defconfig
Shiraz Hashim (13):
sp810 Fix: Switch to slow mode before sysctl_soft_reset
ST SPEAr: Formalized timer support
ST SPEAr13XX: Adding machine specific header files
ST SPEAr13XX: Adding machine specific src files
ST SPEAr: Adding support for SPEAr13xx SoC in spear generic plat/
ST SPEAr13XX: Added compilation support in arch/arm/
ST SPEAr13xx: Adding default config file
ST SPEAr: Adding Debugfs support on clock framework
ST SPEAr: Replacing SIZE macro's with actual required size
SPEAr: defines base addresses as ulong.
ST SPEAr13xx: add L2 cache support
ST SPEAr13xx: Modified static mappings
ST SPEAr: Adding information in Documentation/ and MAINTAINERS
Vipin Kumar (5):
ST SPEAr: Adding machine support for nand
ST SPEAr : EMI (Extrenal Memory Interface) controller driver
SPEAr : Pad multiplexing handling modified
SPEAr13xx : Fixed part devices in SPEAr13xx addded to the generic
implementation
SPEAr : Updating pad multiplexing support
Vipul-kumar Samar (1):
ST SPEAr: Adding support for CLCD on SPEAr3xx/6xx
Viresh Kumar (28):
spear/vmalloc.h: Appending UL to VMALLOC_END
SPEAr: Defining IOMEM(x) and updating declaration of MISC_BASE
ST SPEAr: Padmux code Updated
ST SPEAr: Making clock functions more generic
ST SPEAr: Updating Clock Support
ST SPEAr: Correcting SOC Config base address for spear320
ST SPEAr: Adding PLGPIO driver for spear platform
ST SPEAr: Added ARM PL061 GPIO Support on SPEAr13xx and modified
resource size
ST SPEAr: Adding support for ST's PWM IP
ST SPEAr: Adding Watchdog support
ST SPEAr: Adding support for SSP PL022
ST SPEAr: Adding support for SDHCI (SDIO)
ST SPEAr: Changing resource size of amba devices to SZ_4K
ST SPEAr: Adding miscellaneous devices
SPEAr320: Adding support for CAN
ST SPEAr: Adding support for DDR in clock framework
ST SPEAr: replace readl, writel with readl_relaxed, writel_relaxed in
uncompress.h
SPEAr1310: Adding Static Mapping for RAS Area
SPEAr: Adding and Updating Clock definitions
ST SPEAr3xx: Passing pmx devices address from machine *.c files
ST SPEAr Clock Framework: Updating for single image solution
ST SPEAr: Appending spear3** with global structures
ST SPEAr3xx: Updating plgpio and emi source to make it compliant with
single image strategy
SPEAr6xx: Rework Kconfig for single image solution
ST SPEAR6xx: renaming spear600_defconfig as spear6xx_defconfig
ST SPEAr13xx: Pass default padmux settings as parameter to
spear13**_init routine
ST SPEAr: Adding devices & clocks
ST SPEAr: Updating defconfigs
Documentation/arm/SPEAr/overview.txt | 34 +-
MAINTAINERS | 6 +
arch/arm/Kconfig | 6 +-
arch/arm/Makefile | 2 +
arch/arm/configs/spear13xx_defconfig | 127 ++
arch/arm/configs/spear300_defconfig | 51 -
arch/arm/configs/spear310_defconfig | 52 -
arch/arm/configs/spear320_defconfig | 52 -
arch/arm/configs/spear3xx_defconfig | 119 ++
arch/arm/configs/spear600_defconfig | 49 -
arch/arm/configs/spear6xx_defconfig | 109 ++
arch/arm/include/asm/hardware/sp810.h | 3 +
arch/arm/mach-spear13xx/Kconfig | 32 +
arch/arm/mach-spear13xx/Makefile | 23 +
arch/arm/mach-spear13xx/Makefile.boot | 3 +
arch/arm/mach-spear13xx/clock.c | 1204 ++++++++++++++++++++
arch/arm/mach-spear13xx/headsmp.S | 42 +
arch/arm/mach-spear13xx/hotplug.c | 121 ++
arch/arm/mach-spear13xx/include/mach/clkdev.h | 19 +
arch/arm/mach-spear13xx/include/mach/debug-macro.S | 14 +
arch/arm/mach-spear13xx/include/mach/entry-macro.S | 22 +
arch/arm/mach-spear13xx/include/mach/generic.h | 275 +++++
arch/arm/mach-spear13xx/include/mach/gpio.h | 37 +
arch/arm/mach-spear13xx/include/mach/hardware.h | 38 +
arch/arm/mach-spear13xx/include/mach/io.h | 19 +
arch/arm/mach-spear13xx/include/mach/irqs.h | 153 +++
arch/arm/mach-spear13xx/include/mach/memory.h | 19 +
arch/arm/mach-spear13xx/include/mach/misc_regs.h | 386 +++++++
arch/arm/mach-spear13xx/include/mach/pcie.h | 170 +++
arch/arm/mach-spear13xx/include/mach/smp.h | 25 +
arch/arm/mach-spear13xx/include/mach/spear.h | 95 ++
arch/arm/mach-spear13xx/include/mach/spear1300.h | 21 +
arch/arm/mach-spear13xx/include/mach/spear1310.h | 64 +
arch/arm/mach-spear13xx/include/mach/suspend.h | 47 +
arch/arm/mach-spear13xx/include/mach/system.h | 35 +
arch/arm/mach-spear13xx/include/mach/timex.h | 19 +
arch/arm/mach-spear13xx/include/mach/uncompress.h | 19 +
arch/arm/mach-spear13xx/include/mach/vmalloc.h | 18 +
arch/arm/mach-spear13xx/localtimer.c | 25 +
arch/arm/mach-spear13xx/pcie.c | 862 ++++++++++++++
arch/arm/mach-spear13xx/platsmp.c | 162 +++
arch/arm/mach-spear13xx/pm.c | 107 ++
arch/arm/mach-spear13xx/sleep.S | 435 +++++++
arch/arm/mach-spear13xx/spear1300.c | 38 +
arch/arm/mach-spear13xx/spear1300_evb.c | 146 +++
arch/arm/mach-spear13xx/spear1310.c | 516 +++++++++
arch/arm/mach-spear13xx/spear1310_evb.c | 166 +++
arch/arm/mach-spear13xx/spear13xx.c | 1057 +++++++++++++++++
arch/arm/mach-spear3xx/Kconfig | 30 +-
arch/arm/mach-spear3xx/Kconfig300 | 17 -
arch/arm/mach-spear3xx/Kconfig310 | 17 -
arch/arm/mach-spear3xx/Kconfig320 | 17 -
arch/arm/mach-spear3xx/Makefile | 4 +
arch/arm/mach-spear3xx/clock.c | 576 ++++++++--
arch/arm/mach-spear3xx/emi.c | 117 ++
arch/arm/mach-spear3xx/include/mach/emi.h | 65 ++
arch/arm/mach-spear3xx/include/mach/generic.h | 280 +++--
arch/arm/mach-spear3xx/include/mach/gpio.h | 143 +++
arch/arm/mach-spear3xx/include/mach/hardware.h | 2 +
arch/arm/mach-spear3xx/include/mach/irqs.h | 206 ++--
arch/arm/mach-spear3xx/include/mach/misc_regs.h | 148 ++--
arch/arm/mach-spear3xx/include/mach/spear.h | 134 +--
arch/arm/mach-spear3xx/include/mach/spear300.h | 86 +-
arch/arm/mach-spear3xx/include/mach/spear310.h | 85 +-
arch/arm/mach-spear3xx/include/mach/spear320.h | 121 +--
arch/arm/mach-spear3xx/include/mach/suspend.h | 44 +
arch/arm/mach-spear3xx/spear300.c | 640 ++++++++---
arch/arm/mach-spear3xx/spear300_evb.c | 109 ++-
arch/arm/mach-spear3xx/spear310.c | 423 ++++++--
arch/arm/mach-spear3xx/spear310_evb.c | 135 ++-
arch/arm/mach-spear3xx/spear320.c | 844 +++++++++++----
arch/arm/mach-spear3xx/spear320_evb.c | 120 ++-
arch/arm/mach-spear3xx/spear3xx.c | 741 ++++++++++---
arch/arm/mach-spear6xx/Kconfig | 15 +-
arch/arm/mach-spear6xx/Kconfig600 | 17 -
arch/arm/mach-spear6xx/clock.c | 438 ++++++--
arch/arm/mach-spear6xx/include/mach/generic.h | 19 +-
arch/arm/mach-spear6xx/include/mach/gpio.h | 27 +
arch/arm/mach-spear6xx/include/mach/hardware.h | 3 +-
arch/arm/mach-spear6xx/include/mach/misc_regs.h | 148 ++--
arch/arm/mach-spear6xx/include/mach/spear.h | 174 +---
arch/arm/mach-spear6xx/include/mach/suspend.h | 44 +
arch/arm/mach-spear6xx/spear600_evb.c | 33 +-
arch/arm/mach-spear6xx/spear6xx.c | 344 ++++++-
arch/arm/mm/Kconfig | 2 +-
arch/arm/plat-spear/Kconfig | 17 +
arch/arm/plat-spear/Makefile | 21 +-
arch/arm/plat-spear/clcd.c | 114 ++
arch/arm/plat-spear/clock.c | 922 +++++++++++++---
arch/arm/plat-spear/cpufreq.c | 166 +++
arch/arm/plat-spear/i2c_eval_board.c | 29 +
arch/arm/plat-spear/include/plat/clock.h | 191 +++-
arch/arm/plat-spear/include/plat/fsmc.h | 36 +
arch/arm/plat-spear/include/plat/gpio.h | 35 +
arch/arm/plat-spear/include/plat/hardware.h | 23 +
arch/arm/plat-spear/include/plat/padmux.h | 34 +-
arch/arm/plat-spear/include/plat/spi.h | 74 ++
arch/arm/plat-spear/include/plat/uncompress.h | 4 +-
arch/arm/plat-spear/include/plat/vmalloc.h | 2 +-
arch/arm/plat-spear/padmux.c | 54 +-
arch/arm/plat-spear/plgpio.c | 474 ++++++++
arch/arm/plat-spear/pll_clk.S | 187 +++
arch/arm/plat-spear/pm.c | 104 ++
arch/arm/plat-spear/pwm.c | 484 ++++++++
arch/arm/plat-spear/sleep.S | 288 +++++
arch/arm/plat-spear/time.c | 21 +-
drivers/rtc/Kconfig | 8 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-spear.c | 534 +++++++++
drivers/video/Kconfig | 14 +-
110 files changed, 15124 insertions(+), 2125 deletions(-)
create mode 100644 arch/arm/configs/spear13xx_defconfig
delete mode 100644 arch/arm/configs/spear300_defconfig
delete mode 100644 arch/arm/configs/spear310_defconfig
delete mode 100644 arch/arm/configs/spear320_defconfig
create mode 100644 arch/arm/configs/spear3xx_defconfig
delete mode 100644 arch/arm/configs/spear600_defconfig
create mode 100644 arch/arm/configs/spear6xx_defconfig
create mode 100644 arch/arm/mach-spear13xx/Kconfig
create mode 100644 arch/arm/mach-spear13xx/Makefile
create mode 100644 arch/arm/mach-spear13xx/Makefile.boot
create mode 100644 arch/arm/mach-spear13xx/clock.c
create mode 100644 arch/arm/mach-spear13xx/headsmp.S
create mode 100644 arch/arm/mach-spear13xx/hotplug.c
create mode 100644 arch/arm/mach-spear13xx/include/mach/clkdev.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/debug-macro.S
create mode 100644 arch/arm/mach-spear13xx/include/mach/entry-macro.S
create mode 100644 arch/arm/mach-spear13xx/include/mach/generic.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/gpio.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/hardware.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/io.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/irqs.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/memory.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/misc_regs.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/pcie.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/smp.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/spear.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/spear1300.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/spear1310.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/suspend.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/system.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/timex.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/uncompress.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/vmalloc.h
create mode 100644 arch/arm/mach-spear13xx/localtimer.c
create mode 100644 arch/arm/mach-spear13xx/pcie.c
create mode 100644 arch/arm/mach-spear13xx/platsmp.c
create mode 100644 arch/arm/mach-spear13xx/pm.c
create mode 100644 arch/arm/mach-spear13xx/sleep.S
create mode 100644 arch/arm/mach-spear13xx/spear1300.c
create mode 100644 arch/arm/mach-spear13xx/spear1300_evb.c
create mode 100644 arch/arm/mach-spear13xx/spear1310.c
create mode 100644 arch/arm/mach-spear13xx/spear1310_evb.c
create mode 100644 arch/arm/mach-spear13xx/spear13xx.c
delete mode 100644 arch/arm/mach-spear3xx/Kconfig300
delete mode 100644 arch/arm/mach-spear3xx/Kconfig310
delete mode 100644 arch/arm/mach-spear3xx/Kconfig320
create mode 100644 arch/arm/mach-spear3xx/emi.c
create mode 100644 arch/arm/mach-spear3xx/include/mach/emi.h
create mode 100644 arch/arm/mach-spear3xx/include/mach/suspend.h
delete mode 100644 arch/arm/mach-spear6xx/Kconfig600
create mode 100644 arch/arm/mach-spear6xx/include/mach/suspend.h
create mode 100644 arch/arm/plat-spear/clcd.c
create mode 100644 arch/arm/plat-spear/cpufreq.c
create mode 100644 arch/arm/plat-spear/i2c_eval_board.c
create mode 100644 arch/arm/plat-spear/include/plat/fsmc.h
create mode 100644 arch/arm/plat-spear/include/plat/hardware.h
create mode 100644 arch/arm/plat-spear/include/plat/spi.h
create mode 100644 arch/arm/plat-spear/plgpio.c
create mode 100644 arch/arm/plat-spear/pll_clk.S
create mode 100644 arch/arm/plat-spear/pm.c
create mode 100644 arch/arm/plat-spear/pwm.c
create mode 100644 arch/arm/plat-spear/sleep.S
create mode 100644 drivers/rtc/rtc-spear.c
--
1.7.3.4
More information about the linux-arm-kernel
mailing list