[PATCH v2] OMAP: use fncpy to copy the PM code functions to SRAM
Kevin Hilman
khilman at ti.com
Wed Jan 19 13:31:33 EST 2011
jean.pihet at newoldbits.com writes:
> From: Jean Pihet <j-pihet at ti.com>
>
> The new fncpy API is better suited for copying some
> code to SRAM at runtime. This patch changes the ad-hoc
> code to the more generic fncpy API.
>
> Tested OK on OMAP3 in low power modes (RET/OFF)
> using omap2plus_defconfig with !CONFIG_THUMB2_KERNEL.
> Compile tested on OMAP1/2 using omap1_defconfig.
>
> Signed-off-by: Jean Pihet <j-pihet at ti.com>
Acked-by: Kevin Hilman <khilman at ti.com>
Boot tested on OMAP1 & OMAP2 as well. Note that neither OMAP1 or OMAP2
has had working suspend/resume for a long time now, so I did not test
suspend/resume.
Kevin
> ---
> arch/arm/mach-omap1/pm.h | 6 +++---
> arch/arm/mach-omap1/sleep.S | 3 +++
> arch/arm/mach-omap1/sram.S | 1 +
> arch/arm/mach-omap2/pm.h | 2 +-
> arch/arm/mach-omap2/sleep24xx.S | 2 ++
> arch/arm/mach-omap2/sleep34xx.S | 2 ++
> arch/arm/mach-omap2/sram242x.S | 3 +++
> arch/arm/mach-omap2/sram243x.S | 3 +++
> arch/arm/mach-omap2/sram34xx.S | 1 +
> arch/arm/plat-omap/include/plat/sram.h | 14 +++++++++++++-
> arch/arm/plat-omap/sram.c | 14 +++++++++-----
> 11 files changed, 41 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
> index 56a6479..cd926dc 100644
> --- a/arch/arm/mach-omap1/pm.h
> +++ b/arch/arm/mach-omap1/pm.h
> @@ -123,9 +123,9 @@ extern void allow_idle_sleep(void);
> extern void omap1_pm_idle(void);
> extern void omap1_pm_suspend(void);
>
> -extern void omap7xx_cpu_suspend(unsigned short, unsigned short);
> -extern void omap1510_cpu_suspend(unsigned short, unsigned short);
> -extern void omap1610_cpu_suspend(unsigned short, unsigned short);
> +extern void omap7xx_cpu_suspend(unsigned long, unsigned long);
> +extern void omap1510_cpu_suspend(unsigned long, unsigned long);
> +extern void omap1610_cpu_suspend(unsigned long, unsigned long);
> extern void omap7xx_idle_loop_suspend(void);
> extern void omap1510_idle_loop_suspend(void);
> extern void omap1610_idle_loop_suspend(void);
> diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
> index ef771ce..c875bdc 100644
> --- a/arch/arm/mach-omap1/sleep.S
> +++ b/arch/arm/mach-omap1/sleep.S
> @@ -58,6 +58,7 @@
> */
>
> #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
> + .align 3
> ENTRY(omap7xx_cpu_suspend)
>
> @ save registers on stack
> @@ -137,6 +138,7 @@ ENTRY(omap7xx_cpu_suspend_sz)
> #endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
>
> #ifdef CONFIG_ARCH_OMAP15XX
> + .align 3
> ENTRY(omap1510_cpu_suspend)
>
> @ save registers on stack
> @@ -211,6 +213,7 @@ ENTRY(omap1510_cpu_suspend_sz)
> #endif /* CONFIG_ARCH_OMAP15XX */
>
> #if defined(CONFIG_ARCH_OMAP16XX)
> + .align 3
> ENTRY(omap1610_cpu_suspend)
>
> @ save registers on stack
> diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
> index 7724e52..692587d 100644
> --- a/arch/arm/mach-omap1/sram.S
> +++ b/arch/arm/mach-omap1/sram.S
> @@ -18,6 +18,7 @@
> /*
> * Reprograms ULPD and CKCTL.
> */
> + .align 3
> ENTRY(omap1_sram_reprogram_clock)
> stmfd sp!, {r0 - r12, lr} @ save registers on stack
>
> diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
> index 1c1b0ab..39580e6 100644
> --- a/arch/arm/mach-omap2/pm.h
> +++ b/arch/arm/mach-omap2/pm.h
> @@ -92,7 +92,7 @@ extern void omap24xx_idle_loop_suspend(void);
> extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
> void __iomem *sdrc_power);
> extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
> -extern void save_secure_ram_context(u32 *addr);
> +extern int save_secure_ram_context(u32 *addr);
> extern void omap3_save_scratchpad_contents(void);
>
> extern unsigned int omap24xx_idle_loop_suspend_sz;
> diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
> index c7780cc..b5071a4 100644
> --- a/arch/arm/mach-omap2/sleep24xx.S
> +++ b/arch/arm/mach-omap2/sleep24xx.S
> @@ -47,6 +47,7 @@
> * Note: This code get's copied to internal SRAM at boot. When the OMAP
> * wakes up it continues execution at the point it went to sleep.
> */
> + .align 3
> ENTRY(omap24xx_idle_loop_suspend)
> stmfd sp!, {r0, lr} @ save registers on stack
> mov r0, #0 @ clear for mcr setup
> @@ -82,6 +83,7 @@ ENTRY(omap24xx_idle_loop_suspend_sz)
> * The DLL load value is not kept in RETENTION or OFF. It needs to be restored
> * at wake
> */
> + .align 3
> ENTRY(omap24xx_cpu_suspend)
> stmfd sp!, {r0 - r12, lr} @ save registers on stack
> mov r3, #0x0 @ clear for mcr call
> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
> index 98d8232..951a0be 100644
> --- a/arch/arm/mach-omap2/sleep34xx.S
> +++ b/arch/arm/mach-omap2/sleep34xx.S
> @@ -118,6 +118,7 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
>
> .text
> /* Function to call rom code to save secure ram context */
> + .align 3
> ENTRY(save_secure_ram_context)
> stmfd sp!, {r1-r12, lr} @ save registers on stack
> adr r3, api_params @ r3 points to parameters
> @@ -169,6 +170,7 @@ ENTRY(save_secure_ram_context_sz)
> * depending on the low power mode (non-OFF vs OFF modes),
> * cf. 'Resume path for xxx mode' comments.
> */
> + .align 3
> ENTRY(omap34xx_cpu_suspend)
> stmfd sp!, {r0-r12, lr} @ save registers on stack
>
> diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
> index 055310c..ff9b9db 100644
> --- a/arch/arm/mach-omap2/sram242x.S
> +++ b/arch/arm/mach-omap2/sram242x.S
> @@ -39,6 +39,7 @@
>
> .text
>
> + .align 3
> ENTRY(omap242x_sram_ddr_init)
> stmfd sp!, {r0 - r12, lr} @ save registers on stack
>
> @@ -143,6 +144,7 @@ ENTRY(omap242x_sram_ddr_init_sz)
> * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
> * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
> */
> + .align 3
> ENTRY(omap242x_sram_reprogram_sdrc)
> stmfd sp!, {r0 - r10, lr} @ save registers on stack
> mov r3, #0x0 @ clear for mrc call
> @@ -238,6 +240,7 @@ ENTRY(omap242x_sram_reprogram_sdrc_sz)
> /*
> * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
> */
> + .align 3
> ENTRY(omap242x_sram_set_prcm)
> stmfd sp!, {r0-r12, lr} @ regs to stack
> adr r4, pbegin @ addr of preload start
> diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
> index f900758..7673020 100644
> --- a/arch/arm/mach-omap2/sram243x.S
> +++ b/arch/arm/mach-omap2/sram243x.S
> @@ -39,6 +39,7 @@
>
> .text
>
> + .align 3
> ENTRY(omap243x_sram_ddr_init)
> stmfd sp!, {r0 - r12, lr} @ save registers on stack
>
> @@ -143,6 +144,7 @@ ENTRY(omap243x_sram_ddr_init_sz)
> * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
> * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
> */
> + .align 3
> ENTRY(omap243x_sram_reprogram_sdrc)
> stmfd sp!, {r0 - r10, lr} @ save registers on stack
> mov r3, #0x0 @ clear for mrc call
> @@ -238,6 +240,7 @@ ENTRY(omap243x_sram_reprogram_sdrc_sz)
> /*
> * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
> */
> + .align 3
> ENTRY(omap243x_sram_set_prcm)
> stmfd sp!, {r0-r12, lr} @ regs to stack
> adr r4, pbegin @ addr of preload start
> diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
> index 7f893a2..25011ca 100644
> --- a/arch/arm/mach-omap2/sram34xx.S
> +++ b/arch/arm/mach-omap2/sram34xx.S
> @@ -111,6 +111,7 @@
> * since it will cause the ARM MMU to attempt to walk the page tables.
> * These crashes may be intermittent.
> */
> + .align 3
> ENTRY(omap3_sram_configure_core_dpll)
> stmfd sp!, {r1-r12, lr} @ store regs to stack
>
> diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
> index 9967d5e..d673f2c 100644
> --- a/arch/arm/plat-omap/include/plat/sram.h
> +++ b/arch/arm/plat-omap/include/plat/sram.h
> @@ -12,7 +12,19 @@
> #define __ARCH_ARM_OMAP_SRAM_H
>
> #ifndef __ASSEMBLY__
> -extern void * omap_sram_push(void * start, unsigned long size);
> +#include <asm/fncpy.h>
> +
> +extern void *omap_sram_push_address(unsigned long size);
> +
> +/* Macro to push a function to the internal SRAM, using the fncpy API */
> +#define omap_sram_push(funcp, size) ({ \
> + typeof(&funcp) _res = NULL; \
> + void *_sram_address = omap_sram_push_address(size); \
> + if (_sram_address) \
> + _res = fncpy(_sram_address, &funcp, size); \
> + _res; \
> +})
> +
> extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
>
> extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
> diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
> index e26e504..68fcc7d 100644
> --- a/arch/arm/plat-omap/sram.c
> +++ b/arch/arm/plat-omap/sram.c
> @@ -242,7 +242,14 @@ static void __init omap_map_sram(void)
> omap_sram_size - SRAM_BOOTLOADER_SZ);
> }
>
> -void * omap_sram_push(void * start, unsigned long size)
> +/*
> + * Memory allocator for SRAM: calculates the new ceiling address
> + * for pushing a function using the fncpy API.
> + *
> + * Note that fncpy requires the returned address to be aligned
> + * to an 8-byte boundary.
> + */
> +void *omap_sram_push_address(unsigned long size)
> {
> if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
> printk(KERN_ERR "Not enough space in SRAM\n");
> @@ -250,10 +257,7 @@ void * omap_sram_push(void * start, unsigned long size)
> }
>
> omap_sram_ceil -= size;
> - omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
> - memcpy((void *)omap_sram_ceil, start, size);
> - flush_icache_range((unsigned long)omap_sram_ceil,
> - (unsigned long)(omap_sram_ceil + size));
> + omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, FNCPY_ALIGN);
>
> return (void *)omap_sram_ceil;
> }
More information about the linux-arm-kernel
mailing list