[PATCH] pxa3xx: fix PXA GPIO IRQ handling

[Sven Neumann]

From: Lars-Peter Clausen <lars at metafoo.de>

Set the "set_wake" field of the irq_chip struct before calling
set_irq_chip() for all of the IRQs, so that the compat handler
actually gets installed.

Tested-by: Sven Neumann <s.neumann at raumfeld.com>
---
 arch/arm/mach-pxa/irq.c    |    7 ++++---
 arch/arm/mach-pxa/pxa3xx.c |    4 ++--
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 1beb40f..a5b42a7 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -111,13 +111,13 @@ static void __init pxa_init_low_gpio_irq(set_wake_t fn)
 	GRER0 &= ~0x3;
 	GEDR0 = 0x3;
 
+	pxa_low_gpio_chip.set_wake = fn;
+
 	for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
 		set_irq_chip(irq, &pxa_low_gpio_chip);
 		set_irq_handler(irq, handle_edge_irq);
 		set_irq_flags(irq, IRQF_VALID);
 	}
-
-	pxa_low_gpio_chip.set_wake = fn;
 }
 
 void __init pxa_init_irq(int irq_nr, set_wake_t fn)
@@ -142,13 +142,14 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 	/* only unmasked interrupts kick us out of idle */
 	ICCR = 1;
 
+	pxa_internal_irq_chip.set_wake = fn;
+
 	for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq++) {
 		set_irq_chip(irq, &pxa_internal_irq_chip);
 		set_irq_handler(irq, handle_level_irq);
 		set_irq_flags(irq, IRQF_VALID);
 	}
 
-	pxa_internal_irq_chip.set_wake = fn;
 	pxa_init_low_gpio_irq(fn);
 }
 
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 276e8fb..5a8fe5c 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -567,13 +567,13 @@ static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
 {
 	int irq;
 
+	pxa_ext_wakeup_chip.set_wake = fn;
+
 	for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) {
 		set_irq_chip(irq, &pxa_ext_wakeup_chip);
 		set_irq_handler(irq, handle_edge_irq);
 		set_irq_flags(irq, IRQF_VALID);
 	}
-
-	pxa_ext_wakeup_chip.set_wake = fn;
 }
 
 void __init pxa3xx_init_irq(void)
-- 
1.7.1