[PATCH V4 28/62] ST SPEAr: Changing resource size of amba devices to SZ_4K
Viresh Kumar
viresh.kumar at st.com
Tue Jan 18 02:11:55 EST 2011
Signed-off-by: Viresh Kumar <viresh.kumar at st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar at st.com>
---
arch/arm/mach-spear3xx/spear300.c | 2 +-
arch/arm/mach-spear3xx/spear320.c | 2 +-
arch/arm/mach-spear3xx/spear3xx.c | 2 +-
arch/arm/mach-spear6xx/spear6xx.c | 8 +++-----
4 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index fceb71f..6989407 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -382,7 +382,7 @@ struct amba_device clcd_device = {
},
.res = {
.start = SPEAR300_CLCD_BASE,
- .end = SPEAR300_CLCD_BASE + SPEAR300_CLCD_SIZE - 1,
+ .end = SPEAR300_CLCD_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.dma_mask = ~0,
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 6ab35db..ab4ad8e 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -399,7 +399,7 @@ struct amba_device clcd_device = {
},
.res = {
.start = SPEAR320_CLCD_BASE,
- .end = SPEAR320_CLCD_BASE + SPEAR320_CLCD_SIZE - 1,
+ .end = SPEAR320_CLCD_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.dma_mask = ~0,
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index d8efad2..61db0b2f 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -79,7 +79,7 @@ struct amba_device uart_device = {
},
.res = {
.start = SPEAR3XX_ICM1_UART_BASE,
- .end = SPEAR3XX_ICM1_UART_BASE + SPEAR3XX_ICM1_UART_SIZE - 1,
+ .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART, NO_IRQ},
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index 58f1a15..d00b581 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -35,7 +35,7 @@ struct amba_device clcd_device = {
},
.res = {
.start = SPEAR6XX_ICM3_CLCD_BASE,
- .end = SPEAR6XX_ICM3_CLCD_BASE + SPEAR6XX_ICM3_CLCD_SIZE - 1,
+ .end = SPEAR6XX_ICM3_CLCD_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.dma_mask = ~0,
@@ -117,8 +117,7 @@ struct amba_device uart_device[] = {
},
.res = {
.start = SPEAR6XX_ICM1_UART0_BASE,
- .end = SPEAR6XX_ICM1_UART0_BASE +
- SPEAR6XX_ICM1_UART0_SIZE - 1,
+ .end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART_0, NO_IRQ},
@@ -128,8 +127,7 @@ struct amba_device uart_device[] = {
},
.res = {
.start = SPEAR6XX_ICM1_UART1_BASE,
- .end = SPEAR6XX_ICM1_UART1_BASE +
- SPEAR6XX_ICM1_UART1_SIZE - 1,
+ .end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART_1, NO_IRQ},
--
1.7.2.2
More information about the linux-arm-kernel
mailing list