[PATCH 04/14] ARM: v6k: introduce CPU_V6K option
Russell King - ARM Linux
linux at arm.linux.org.uk
Mon Jan 17 14:22:21 EST 2011
Introduce a CPU_V6K configuration option for platforms to select if they
have a V6K CPU core. This allows us to identify whether we need to
support ARMv6 CPUs without the V6K SMP extensions at build time.
Currently CPU_V6K is just an alias for CPU_V6, and all places which
reference CPU_V6 are replaced by (CPU_V6 || CPU_V6K).
Select CPU_V6K from platforms which are known to be V6K-only.
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
arch/arm/Kconfig | 10 ++++----
arch/arm/Makefile | 1 +
arch/arm/boot/compressed/head.S | 2 +-
arch/arm/boot/compressed/misc.c | 2 +-
arch/arm/include/asm/cacheflush.h | 5 ++-
arch/arm/include/asm/proc-fns.h | 2 +-
arch/arm/kernel/debug.S | 2 +-
arch/arm/kernel/perf_event_v6.c | 4 +-
arch/arm/mm/Kconfig | 47 +++++++++++++++++++++++-------------
arch/arm/mm/Makefile | 1 +
arch/arm/mm/mmap.c | 2 +-
11 files changed, 47 insertions(+), 31 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5cff165..95ba92f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -24,7 +24,7 @@ config ARM
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
select HAVE_REGS_AND_STACK_ACCESS_API
- select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7))
+ select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
select HAVE_C_RECORDMCOUNT
select HAVE_GENERIC_HARDIRQS
select HAVE_SPARSE_IRQ
@@ -1048,7 +1048,7 @@ config XSCALE_PMU
default y
config CPU_HAS_PMU
- depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \
+ depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \
(!ARCH_OMAP3 || OMAP3_EMU)
default y
bool
@@ -1064,7 +1064,7 @@ endif
config ARM_ERRATA_411920
bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
- depends on CPU_V6
+ depends on CPU_V6 || CPU_V6K
help
Invalidation of the Instruction Cache operation can
fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
@@ -1361,7 +1361,7 @@ config HZ
config THUMB2_KERNEL
bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
- depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
+ depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL
select AEABI
select ARM_ASM_UNIFIED
help
@@ -1852,7 +1852,7 @@ config FPE_FASTFPE
config VFP
bool "VFP-format floating point maths"
- depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
+ depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
help
Say Y to include VFP support code in the kernel. This is needed
if your hardware includes a VFP unit.
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c22c1ad..9c43052 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -89,6 +89,7 @@ tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110)
tune-$(CONFIG_CPU_XSC3) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
tune-$(CONFIG_CPU_FEROCEON) :=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_V6K) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
ifeq ($(CONFIG_AEABI),y)
CFLAGS_ABI :=-mabi=aapcs-linux -mno-thumb-interwork
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 7193884..91f20f0 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -21,7 +21,7 @@
#if defined(CONFIG_DEBUG_ICEDCC)
-#ifdef CONFIG_CPU_V6
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
.macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index e653a6d..4657e87 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -36,7 +36,7 @@ extern void error(char *x);
#ifdef CONFIG_DEBUG_ICEDCC
-#ifdef CONFIG_CPU_V6
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
static void icedcc_putc(int ch)
{
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 3acd8fa..7d0614f 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -116,7 +116,7 @@
# define MULTI_CACHE 1
#endif
-#if defined(CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
//# ifdef _CACHE
# define MULTI_CACHE 1
//# else
@@ -316,7 +316,8 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *,
* Optimized __flush_icache_all for the common cases. Note that UP ARMv7
* will fall through to use __flush_icache_all_generic.
*/
-#if (defined(CONFIG_CPU_V7) && defined(CONFIG_CPU_V6)) || \
+#if (defined(CONFIG_CPU_V7) && \
+ (defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K))) || \
defined(CONFIG_SMP_ON_UP)
#define __flush_icache_preferred __cpuc_flush_icache_all
#elif __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 8fdae9b..296ca47 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -231,7 +231,7 @@
# endif
#endif
-#ifdef CONFIG_CPU_V6
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
# ifdef CPU_NAME
# undef MULTI_CPU
# define MULTI_CPU
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index a0f0752..d2d983b 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -25,7 +25,7 @@
.macro addruart, rp, rv
.endm
-#if defined(CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
.macro senduart, rd, rx
mcr p14, 0, \rd, c0, c5, 0
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index c058bfc..6fc2d22 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -30,7 +30,7 @@
* enable the interrupt.
*/
-#ifdef CONFIG_CPU_V6
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
enum armv6_perf_types {
ARMV6_PERFCTR_ICACHE_MISS = 0x0,
ARMV6_PERFCTR_IBUF_STALL = 0x1,
@@ -669,4 +669,4 @@ static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
{
return NULL;
}
-#endif /* CONFIG_CPU_V6 */
+#endif /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9d30c6f..559e933 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -402,16 +402,18 @@ config CPU_V6
select CPU_TLB_V6 if MMU
# ARMv6k
-config CPU_32v6K
- bool "Support ARM V6K processor extensions" if !SMP
- depends on CPU_V6 || CPU_V7
- default y if SMP && !(ARCH_MX3 || ARCH_OMAP2)
- help
- Say Y here if your ARMv6 processor supports the 'K' extension.
- This enables the kernel to use some instructions not present
- on previous processors, and as such a kernel build with this
- enabled will not boot on processors with do not support these
- instructions.
+config CPU_V6K
+ bool "Support ARM V6K processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
+ select CPU_32v6
+ select CPU_32v6K if !ARCH_OMAP2
+ select CPU_ABRT_EV6
+ select CPU_PABRT_V6
+ select CPU_CACHE_V6
+ select CPU_CACHE_VIPT
+ select CPU_CP15_MMU
+ select CPU_HAS_ASID if MMU
+ select CPU_COPY_V6 if MMU
+ select CPU_TLB_V6 if MMU
# ARMv7
config CPU_V7
@@ -453,6 +455,17 @@ config CPU_32v6
bool
select TLS_REG_EMUL if !CPU_32v6K && !MMU
+config CPU_32v6K
+ bool "Support ARM V6K processor extensions" if !SMP
+ depends on CPU_V6 || CPU_V6K || CPU_V7
+ default y if SMP && !(ARCH_MX3 || ARCH_OMAP2)
+ help
+ Say Y here if your ARMv6 processor supports the 'K' extension.
+ This enables the kernel to use some instructions not present
+ on previous processors, and as such a kernel build with this
+ enabled will not boot on processors with do not support these
+ instructions.
+
config CPU_32v7
bool
@@ -623,7 +636,7 @@ comment "Processor Features"
config ARM_THUMB
bool "Support Thumb user binaries"
- depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V7 || CPU_FEROCEON
+ depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON
default y
help
Say Y if you want to include kernel support for running user space
@@ -681,7 +694,7 @@ config CPU_BIG_ENDIAN
config CPU_ENDIAN_BE8
bool
depends on CPU_BIG_ENDIAN
- default CPU_V6 || CPU_V7
+ default CPU_V6 || CPU_V6K || CPU_V7
help
Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
@@ -747,7 +760,7 @@ config CPU_CACHE_ROUND_ROBIN
config CPU_BPREDICT_DISABLE
bool "Disable branch prediction"
- depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526
+ depends on CPU_ARM1020 || CPU_V6 || CPU_V6K || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526
help
Say Y here to disable branch prediction. If unsure, say N.
@@ -767,7 +780,7 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
config DMA_CACHE_RWFO
bool "Enable read/write for ownership DMA cache maintenance"
- depends on CPU_V6 && SMP
+ depends on (CPU_V6 || CPU_V6K) && SMP
default y
help
The Snoop Control Unit on ARM11MPCore does not detect the
@@ -823,7 +836,7 @@ config CACHE_L2X0
config CACHE_PL310
bool
depends on CACHE_L2X0
- default y if CPU_V7 && !CPU_V6
+ default y if CPU_V7 && !(CPU_V6 || CPU_V6K)
help
This option enables optimisations for the PL310 cache
controller.
@@ -851,10 +864,10 @@ config ARM_L1_CACHE_SHIFT
default 5
config ARM_DMA_MEM_BUFFERABLE
- bool "Use non-cacheable memory for DMA" if CPU_V6 && !CPU_V7
+ bool "Use non-cacheable memory for DMA" if (CPU_V6 || CPU_V6K) && !CPU_V7
depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \
MACH_REALVIEW_PB11MP)
- default y if CPU_V6 || CPU_V7
+ default y if CPU_V6 || CPU_V6K || CPU_V7
help
Historically, the kernel has used strongly ordered mappings to
provide DMA coherent memory. With the advent of ARMv7, mapping
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 00d74a0..bca7e61 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -90,6 +90,7 @@ obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o
obj-$(CONFIG_CPU_MOHAWK) += proc-mohawk.o
obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o
obj-$(CONFIG_CPU_V6) += proc-v6.o
+obj-$(CONFIG_CPU_V6K) += proc-v6.o
obj-$(CONFIG_CPU_V7) += proc-v7.o
AFLAGS_proc-v6.o :=-Wa,-march=armv6
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index b0a9830..afe209e 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -31,7 +31,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
unsigned long start_addr;
-#ifdef CONFIG_CPU_V6
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
unsigned int cache_type;
int do_align = 0, aliasing = 0;
--
1.6.2.5
More information about the linux-arm-kernel
mailing list