[PATCH] arm: mach-omap2: potential NULL dereference
Vasiliy Kulikov
segoon at openwall.com
Mon Jan 17 05:08:32 EST 2011
If kzalloc() failed, return -ENOMEM.
sr_dev_init() should signal by return value that there is an error.
Signed-off-by: Vasiliy Kulikov <segoon at openwall.com>
---
Cannot compile this driver, so it is not tested at all.
arch/arm/mach-omap2/sr_device.c | 19 +++++++++++++++----
1 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index b1e0af1..20fccfb 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -40,7 +40,7 @@ static struct omap_device_pm_latency omap_sr_latency[] = {
};
/* Read EFUSE values from control registers for OMAP3430 */
-static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
+static int __init sr_set_nvalues(struct omap_volt_data *volt_data,
struct omap_sr_data *sr_data)
{
struct omap_sr_nvalue_table *nvalue_table;
@@ -51,6 +51,8 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
nvalue_table = kzalloc(sizeof(struct omap_sr_nvalue_table)*count,
GFP_KERNEL);
+ if (nvalue_table == NULL)
+ return -ENOMEM;
for (i = 0; i < count; i++) {
u32 v;
@@ -75,6 +77,8 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
sr_data->nvalue_table = nvalue_table;
sr_data->nvalue_count = count;
+
+ return 0;
}
static int sr_dev_init(struct omap_hwmod *oh, void *user)
@@ -84,15 +88,18 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user)
struct omap_volt_data *volt_data;
char *name = "smartreflex";
static int i;
+ int err = 0;
sr_data = kzalloc(sizeof(struct omap_sr_data), GFP_KERNEL);
if (!sr_data) {
+ err = -ENOMEM;
pr_err("%s: Unable to allocate memory for %s sr_data.Error!\n",
__func__, oh->name);
- return -ENOMEM;
+ goto exit;
}
if (!oh->vdd_name) {
+ err = -EINVAL;
pr_err("%s: No voltage domain specified for %s."
"Cannot initialize\n", __func__, oh->name);
goto exit;
@@ -104,6 +111,7 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user)
sr_data->voltdm = omap_voltage_domain_lookup(oh->vdd_name);
if (IS_ERR(sr_data->voltdm)) {
+ err = PTR_ERR(sr_data->voltdm);
pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
__func__, oh->vdd_name);
goto exit;
@@ -111,12 +119,15 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user)
omap_voltage_get_volttable(sr_data->voltdm, &volt_data);
if (!volt_data) {
+ err = -EINVAL;
pr_warning("%s: No Voltage table registerd fo VDD%d."
"Something really wrong\n\n", __func__, i + 1);
goto exit;
}
- sr_set_nvalues(volt_data, sr_data);
+ err = sr_set_nvalues(volt_data, sr_data);
+ if (err)
+ goto exit;
sr_data->enable_on_init = sr_enable_on_init;
@@ -129,7 +140,7 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user)
exit:
i++;
kfree(sr_data);
- return 0;
+ return err;
}
/*
--
1.7.0.4
More information about the linux-arm-kernel
mailing list