[PATCH v4 08/10] ARM: mxs: add ocotp read function

Uwe Kleine-König u.kleine-koenig at pengutronix.de
Thu Jan 13 10:19:39 EST 2011


On Thu, Jan 06, 2011 at 03:13:16PM +0800, Shawn Guo wrote:
> Signed-off-by: Shawn Guo <shawn.guo at freescale.com>
> ---
> Changes for v4:
>  - Call cpu_relax() during polling
> 
> Changes for v2:
>  - Add mutex locking for mxs_read_ocotp()
>  - Use type size_t for count and i
>  - Add comment for clk_enable/disable skipping
>  - Add ERROR bit clearing and polling step
> 
>  arch/arm/mach-mxs/Makefile              |    2 +-
>  arch/arm/mach-mxs/include/mach/common.h |    1 +
>  arch/arm/mach-mxs/ocotp.c               |   79 +++++++++++++++++++++++++++++++
>  3 files changed, 81 insertions(+), 1 deletions(-)
>  create mode 100644 arch/arm/mach-mxs/ocotp.c
> 
> diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
> index 39d3f9c..f23ebbd 100644
> --- a/arch/arm/mach-mxs/Makefile
> +++ b/arch/arm/mach-mxs/Makefile
> @@ -1,5 +1,5 @@
>  # Common support
> -obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o
> +obj-y := clock.o devices.o gpio.o icoll.o iomux.o ocotp.o system.o timer.o
is it worth to make ocotp optional?  (and let evk select
CONFIG_MXS_OCOTP)

Best regards
Uwe
>  
>  obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o
>  obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o
> diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
> index 59133eb..cf02552 100644
> --- a/arch/arm/mach-mxs/include/mach/common.h
> +++ b/arch/arm/mach-mxs/include/mach/common.h
> @@ -13,6 +13,7 @@
>  
>  struct clk;
>  
> +extern int mxs_read_ocotp(int offset, int count, u32 *values);
>  extern int mxs_reset_block(void __iomem *);
>  extern void mxs_timer_init(struct clk *, int);
>  
> diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c
> new file mode 100644
> index 0000000..e2d39aa
> --- /dev/null
> +++ b/arch/arm/mach-mxs/ocotp.c
> @@ -0,0 +1,79 @@
> +/*
> + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/mutex.h>
> +
> +#include <mach/mxs.h>
> +
> +#define BM_OCOTP_CTRL_BUSY		(1 << 8)
> +#define BM_OCOTP_CTRL_ERROR		(1 << 9)
> +#define BM_OCOTP_CTRL_RD_BANK_OPEN	(1 << 12)
> +
> +static DEFINE_MUTEX(ocotp_mutex);
> +
> +int mxs_read_ocotp(unsigned offset, size_t count, u32 *values)
> +{
> +	void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR);
> +	int timeout = 0x400;
> +	size_t i;
> +
> +	mutex_lock(&ocotp_mutex);
> +
> +	/*
> +	 * clk_enable(hbus_clk) for ocotp can be skipped
> +	 * as it must be on when system is running.
> +	 */
> +
> +	/* try to clear ERROR bit */
> +	__mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
> +
> +	/* check both BUSY and ERROR cleared */
> +	while ((__raw_readl(ocotp_base) &
> +		(BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
> +		cpu_relax();
> +
> +	if (unlikely(!timeout))
> +		goto error_unlock;
> +
> +	/* open OCOTP banks for read */
> +	__mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
> +
> +	/* approximately wait 32 hclk cycles */
> +	udelay(1);
> +
> +	/* poll BUSY bit becoming cleared */
> +	timeout = 0x400;
> +	while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
> +		cpu_relax();
> +
> +	if (unlikely(!timeout))
> +		goto error_unlock;
> +
> +	for (i = 0; i < count; i++, offset += 4)
> +		*values++ = __raw_readl(ocotp_base + offset);
> +
> +	/* close banks for power saving */
> +	__mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
> +
> +	mutex_unlock(&ocotp_mutex);
> +
> +	return 0;
> +
> +error_unlock:
> +	mutex_unlock(&ocotp_mutex);
> +	pr_err("%s: timeout in reading OCOTP\n", __func__);
> +	return -ETIMEDOUT;
> +}
> -- 
> 1.7.1
> 
> 
> 

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |



More information about the linux-arm-kernel mailing list