[PATCH v4 09/10] ARM: mx28: read fec mac address from ocotp

[Uwe Kleine-König]

Hello Shawn,

$SUBJECT ~= s,mx28,mxs/mx28evk, please

On Thu, Jan 06, 2011 at 03:13:17PM +0800, Shawn Guo wrote:
> Read fec mac address from ocotp and save it into fec_platform_data
> mac field for fec driver to use.
> 
> Signed-off-by: Shawn Guo <shawn.guo at freescale.com>
> ---
> Changes for v2:
>  - It's not necessary to remove "const" for fec_platform_data from
>    platform-fec.c and devices-common.h, so add it back.
>  - Hard-coding Freescale OUI (00:04:9f) instead of just the first
>    two two octets.
>  - Correct the return of mx28evk_fec_get_mac() and check it
>    with caller
> 
>  arch/arm/mach-mxs/mach-mx28evk.c |   32 ++++++++++++++++++++++++++++++++
>  1 files changed, 32 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
> index def6519..54fa512 100644
> --- a/arch/arm/mach-mxs/mach-mx28evk.c
> +++ b/arch/arm/mach-mxs/mach-mx28evk.c
> @@ -129,12 +129,44 @@ static struct fec_platform_data mx28_fec_pdata[] = {
>  	},
>  };
>  
> +static int __init mx28evk_fec_get_mac(void)
> +{
> +	int i, ret;
> +	u32 val;
> +
> +	/*
> +	 * OCOTP only stores the last 4 octets for each mac address,
> +	 * so hard-code Freescale OUI (00:04:9f) here.
> +	 */
> +	for (i = 0; i < 2; i++) {
> +		ret = mxs_read_ocotp(0x20 + i * 0x10, 1, &val);
> +		if (ret)
> +			goto error;
> +
> +		mx28_fec_pdata[i].mac[0] = 0x00;
> +		mx28_fec_pdata[i].mac[1] = 0x04;
> +		mx28_fec_pdata[i].mac[2] = 0x9f;
> +		mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
> +		mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
> +		mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
> +	}
> +
> +	return 0;
> +
> +error:
> +	pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__);
> +	return ret;
> +}
> +
>  static void __init mx28evk_init(void)
>  {
>  	mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
>  
>  	mx28_add_duart();
>  
> +	if (mx28evk_fec_get_mac())
> +		pr_warn("%s: failed on fec mac setup\n", __func__);
> +
>  	mx28evk_fec_reset();
>  	mx28_add_fec(0, &mx28_fec_pdata[0]);
>  #ifdef CONFIG_FEC2
> -- 
> 1.7.1
> 
> 
> 

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |