[PATCH/RFC 0/3] ARM: S5P: Add a common platform setup code for MIPI CSIS/DSIM

[Sylwester Nawrocki]

On 01/04/2011 04:09 PM, Sylwester Nawrocki wrote:
> Hello,
>
> the following patch series adds the common platform code for configuration
> of the MIPI CSIS and MIPI DSIM PHYs on S5PV210 and S5PV310 SoCs.
> The spinlock is used to avoid races while the common PHY control register
> is accessed from within MIPI DSIM and MIPI CSIS drivers.
> The common PHY enable bit is cleared only when both CSIS and DSIM devices
> are not in use.
>
>
> The patch series contains:
>
> [PATCH/RFC 1/3] ARM: S5P: Add a platform callback for MIPI CSIS PHY control
> [PATCH/RFC 2/3] ARM: S5PV310: Add a platform helper for MIPI DSIM/CSIS setup
> [PATCH/RFC 3/3] ARM: S5PV210: Add a platform helper for MIPI DSIM/CSIS setup
>

Any comments on this one?

Regards,
Sylwester