[PATCH 1/1] arm: mxc: move IOMUX_CONFIG_SION definition to iomux-v3.h

[Richard Zhao]

Hi Sascha,
On Thu, Jan 6, 2011 at 7:05 PM, Richard Zhao <richard.zhao at freescale.com> wrote:
> Signed-off-by: Richard Zhao <richard.zhao at freescale.com>
Will you accept this patch?

Thanks
Richard
> ---
>  arch/arm/plat-mxc/include/mach/iomux-mx53.h |    1 -
>  arch/arm/plat-mxc/include/mach/iomux-v3.h   |    1 +
>  2 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
> index 5deee01..2673007 100644
> --- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
> +++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
> @@ -34,7 +34,6 @@ typedef enum iomux_config {
>        IOMUX_CONFIG_ALT6,
>        IOMUX_CONFIG_ALT7,
>        IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */
> -       IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */
>  } iomux_pin_cfg_t;
>
>  /* These 2 defines are for pins that may not have a mux register, but could
> diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
> index 2277b01..82620af 100644
> --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
> +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
> @@ -105,6 +105,7 @@ typedef u64 iomux_v3_cfg_t;
>  #define PAD_CTL_SRE_FAST               (1 << 0)
>  #define PAD_CTL_SRE_SLOW               (0 << 0)
>
> +#define IOMUX_CONFIG_SION              (0x1 << 4)
>
>  #define MX51_NUM_GPIO_PORT     4
>
> --
> 1.6.3.3
>
>
>