Bug in arch-mmp board selection

[Haojian Zhuang]

On Wed, Jan 5, 2011 at 12:57 PM, Mark F. Brown <mark.brown314 at gmail.com> wrote:
> Hi Eric,
>
> PXA168 and PXA910 are based on PJ1 which is an ARMv5 compatible architecture
> MMP2 is a based on PJ4 which configured as ARMv6 currently (there are
> ARMv7 versions as well)
>
> Currently all SoCs are selectable under the "PXA168/910/MMP2" menu
> option which allows you to then select PXA168, PXA910, and MMP2 boards
> for one image. If you build this configuration this error occurs:
>
>  AS      arch/arm/kernel/entry-armv.o
> arch/arm/kernel/entry-armv.S: Assembler messages:
> arch/arm/kernel/entry-armv.S:212: Error: selected processor does not
> support `clrex'
> arch/arm/kernel/entry-armv.S:244: Error: selected processor does not
> support `clrex'
> arch/arm/kernel/entry-armv.S:302: Error: selected processor does not
> support `clrex'
> arch/arm/kernel/entry-armv.S:338: Error: selected processor does not
> support `clrex'
> make[1]: *** [arch/arm/kernel/entry-armv.o] Error 1
> make: *** [arch/arm/kernel] Error 2
>
You must build PJ1 and PJ4 together. Actually, I plan to add
ARCH_MMP2. So we can avoid this issue.

> I am aware we can resolve this by adding KConfig rules to prevent this
> scenario, but it leads to a deeper question. Why does selecting the
> board in turn select the CPU type instead of the user enabling the CPU
> type and then providing a set of boards for selection?
>
> e.g.
> config MACH_ZYLONITE2
>        bool "Marvell's PXA168 Zylonite2 Development Board"
>       --> select CPU_PXA168
>