[PATCH 5/5] S5PC110: add MIPI-DSI based sample lcd panel driver.

daeinki inki.dae at samsung.com
Sun Jan 2 21:08:52 EST 2011


Kukjin Kim 쓴 글:
> Inki Dae wrote:
>> this patch addes MIPI-DSI based sample panel driver.
>> to write MIPI-DSI based lcd panel driver, you can refer to
>> this sample driver.
>>
>> Signed-off-by: Inki Dae <inki.dae at samsung.com>
>> ---
>>  drivers/video/Kconfig           |    7 ++
>>  drivers/video/Makefile          |    1 +
>>  drivers/video/s5p_mipi_sample.c |  220
>> +++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 228 insertions(+), 0 deletions(-)
>>  create mode 100644 drivers/video/s5p_mipi_sample.c
>>
>> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
>> index aa305c5..325ce86 100644
>> --- a/drivers/video/Kconfig
>> +++ b/drivers/video/Kconfig
>> @@ -2003,6 +2003,13 @@ config S5P_MIPI_DSI
>>  	---help---
>>  	  This enables support for MIPI-DSI device.
>>
>> +config S5P_MIPI_SAMPLE
>> +	tristate "Samsung SoC MIPI-DSI based sample driver."
>> +	depends on S5P_MIPI_DSI && BACKLIGHT_LCD_SUPPORT
> 
> Do we really need SAMPLE driver?...
> And is this MIPI SAMPLE not MIPI DSIM sample?
> 
I added this one for that someone who uses my mipi-dsi driver could 
understand my driver easily. it is just for reference driver.
this sample driver has some problem?

>> +	default n
>> +	---help---
>> +	  This enables support for MIPI-DSI based sample driver.
>> +
>>  config FB_NUC900
>>          bool "NUC900 LCD framebuffer support"
>>          depends on FB && ARCH_W90X900
>> diff --git a/drivers/video/Makefile b/drivers/video/Makefile
>> index f4baed6..c8ac591 100644
>> --- a/drivers/video/Makefile
>> +++ b/drivers/video/Makefile
>> @@ -117,6 +117,7 @@ obj-$(CONFIG_FB_S3C)		  += s3c-fb.o
>>  obj-$(CONFIG_FB_S3C2410)	  += s3c2410fb.o
>>  obj-$(CONFIG_S5P_MIPI_DSI)	  += s5p_mipi_dsi.o s5p_mipi_dsi_common.o \
>>      					s5p_mipi_dsi_lowlevel.o
>> +obj-$(CONFIG_S5P_MIPI_SAMPLE)		+= s5p_mipi_sample.o
>>  obj-$(CONFIG_FB_FSL_DIU)	  += fsl-diu-fb.o
>>  obj-$(CONFIG_FB_COBALT)           += cobalt_lcdfb.o
>>  obj-$(CONFIG_FB_PNX4008_DUM)	  += pnx4008/
> 
> (snip)
> 
> Happy New Year!
> Thanks.
> 
> Best regards,
> Kgene.
> --
> Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
> SW Solution Development Team, Samsung Electronics Co., Ltd.
> 
> 




More information about the linux-arm-kernel mailing list