[PATCH] orion5x: Set links to solid on D-Link DNS-323

[Martin Michlmayr]

Among other changes, commit b2a731aa ("D-link DNS-323 revision A1 power
LED") changed the default behaviour of the power LED from solid to
blinking.  This was done to match the original DNS-323 firmware which
blinks during the boot process and sets the LED to solid when booting
has completed.  However, the downside of this behaviour is that it
requires userland code to change the LED, even for those who don't
care about the behaviour of the original firmware.  Therefore, change
it to solid again and let those who care about the original behaviour
change the behaviour from userland.

Signed-off-by: Martin Michlmayr <tbm at cyrius.com>

--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -262,7 +262,7 @@ static struct gpio_led dns323_leds[] = {
 	{
 		.name = "power:blue",
 		.gpio = DNS323_GPIO_LED_POWER2,
-		.default_trigger = "timer",
+		.default_trigger = "default-on",
 	}, {
 		.name = "right:amber",
 		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,

-- 
Martin Michlmayr
http://www.cyrius.com/