[PATCH 2/3] imx3: Add rtc platform device support

[Vladimir Zapolskiy]

Hi Sasha,

>
> On Wed, Mar 24, 2010 at 02:32:17PM +0300, Vladimir Zapolskiy wrote:
>> This patch adds support for build-in RTC device found on
>> Freescale imx31 and imx35 SoCs.
>> 
>> Signed-off-by: Vladimir Zapolskiy <vzapolskiy at gmail.com>
>> Cc: Sascha Hauer <s.hauer at pengutronix.de>
>> ---
>>  arch/arm/mach-mx3/devices.c |   19 +++++++++++++++++++
>>  arch/arm/mach-mx3/devices.h |    1 +
>>  2 files changed, 20 insertions(+), 0 deletions(-)
>> 
>> diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
>> index f891115..1ffed28 100644
>> --- a/arch/arm/mach-mx3/devices.c
>> +++ b/arch/arm/mach-mx3/devices.c
>> @@ -588,6 +588,25 @@ struct platform_device imx_wdt_device0 = {
>>  	.resource       = imx_wdt_resources,
>
> This patch does not apply. We do not have the watchdog in devices.c atm.
>

please could you suggest the appropriate branch, because this patch is
based on mxc-master branch, where the watchdog is already pushed, see
http://git.pengutronix.de/?p=imx/linux-2.6.git;a=shortlog;h=refs/heads/mxc-master

>>  };
>>  
>> +static struct resource imx_rtc_resources[] = {
>> +	{
>> +		.start  = MX31_RTC_BASE_ADDR,
>> +		.end    = MX31_RTC_BASE_ADDR + 0x3fff,
>> +		.flags  = IORESOURCE_MEM,
>> +	},
>> +	{
>> +		.start  = MX31_INT_RTC,
>> +		.flags  = IORESOURCE_IRQ,
>> +	},
>
> Can you provide a fixup for i.MX35, please? See mx3_devices_init().

Surely. Before patch submission I just checked that base address, size
and interrupt number are equal for i.MX31 and i.MX35 SoCs, and I've
found that in such cases the resources are defined using MX31 macros,
see imx_ssi_resources or mxc_usbhX_resources as reference.

Probably better to separate the devices.c file into two files? You see
one day I hope i.MX37 support will be included into the Linux kernel,
and it would be quite uncomfortable to support three kinds of peripheral
in a single file.

--
With best wishes,
Vladimir