[PATCH 05/11] ST SPEAr: Added clock framework for SPEAr platform and machines
Viresh KUMAR
viresh.kumar at st.com
Wed Mar 3 00:07:35 EST 2010
Clock framework for SPEAr is based upon clkdev framework for ARM
Signed-off-by: Viresh Kumar <viresh.kumar at st.com>
---
arch/arm/mach-spear3xx/clock.c | 525 +++++++++++++++++++++
arch/arm/mach-spear3xx/include/mach/clkdev.h | 19 +
arch/arm/mach-spear6xx/clock.c | 656 ++++++++++++++++++++++++++
arch/arm/mach-spear6xx/include/mach/clkdev.h | 19 +
arch/arm/plat-spear/clock.c | 433 +++++++++++++++++
arch/arm/plat-spear/include/plat/clkdev.h | 20 +
arch/arm/plat-spear/include/plat/clock.h | 130 +++++
7 files changed, 1802 insertions(+), 0 deletions(-)
create mode 100755 arch/arm/mach-spear3xx/clock.c
create mode 100644 arch/arm/mach-spear3xx/include/mach/clkdev.h
create mode 100755 arch/arm/mach-spear6xx/clock.c
create mode 100644 arch/arm/mach-spear6xx/include/mach/clkdev.h
create mode 100755 arch/arm/plat-spear/clock.c
create mode 100644 arch/arm/plat-spear/include/plat/clkdev.h
create mode 100755 arch/arm/plat-spear/include/plat/clock.h
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
new file mode 100755
index 0000000..005fecc
--- /dev/null
+++ b/arch/arm/mach-spear3xx/clock.c
@@ -0,0 +1,525 @@
+/*
+ * arch/arm/mach-spear3xx/clock.c
+ *
+ * SPEAr3xx machines clock framework source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar at st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <mach/misc_regs.h>
+#include <plat/clock.h>
+
+/* root clks */
+/* 32 KHz oscillator clock */
+static struct clk osc_32k_clk = {
+ .flags = ALWAYS_ENABLED,
+ .rate = 32 * KHZ,
+};
+
+static struct clk_lookup osc_32k_cl = {
+ .con_id = "osc_32k_clk",
+ .clk = &osc_32k_clk,
+};
+
+/* 24 MHz oscillator clock */
+static struct clk osc_24m_clk = {
+ .flags = ALWAYS_ENABLED,
+ .rate = 24 * MHZ,
+};
+
+static struct clk_lookup osc_24m_cl = {
+ .con_id = "osc_24m_clk",
+ .clk = &osc_24m_clk,
+};
+
+/* clock derived from 32 KHz osc clk */
+/* rtc clock */
+static struct clk rtc_clk = {
+ .pclk = &osc_32k_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = RTC_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup rtc_cl = {
+ .dev_id = "rtc",
+ .clk = &rtc_clk,
+};
+
+/* clock derived from 24 MHz osc clk */
+/* pll1 configuration structure */
+static struct pll_clk_config pll1_config = {
+ .mode_reg = PLL1_CTR,
+ .cfg_reg = PLL1_FRQ,
+};
+
+/* PLL1 clock */
+static struct clk pll1_clk = {
+ .pclk = &osc_24m_clk,
+ .en_reg = PLL1_CTR,
+ .en_reg_bit = PLL_ENABLE,
+ .recalc = &pll1_clk_recalc,
+ .private_data = &pll1_config,
+};
+
+static struct clk_lookup pll1_cl = {
+ .con_id = "pll1_clk",
+ .clk = &pll1_clk,
+};
+
+/* PLL3 48 MHz clock */
+static struct clk pll3_48m_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &osc_24m_clk,
+ .rate = 48 * MHZ,
+};
+
+static struct clk_lookup pll3_48m_cl = {
+ .con_id = "pll3_48m_clk",
+ .clk = &pll3_48m_clk,
+};
+
+/* watch dog timer clock */
+static struct clk wdt_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &osc_24m_clk,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup wdt_cl = {
+ .dev_id = "wdt",
+ .clk = &wdt_clk,
+};
+
+/* clock derived from pll1 clk */
+/* cpu clock */
+static struct clk cpu_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup cpu_cl = {
+ .con_id = "cpu_clk",
+ .clk = &cpu_clk,
+};
+
+/* ahb configuration structure */
+static struct bus_clk_config ahb_config = {
+ .reg = CORE_CLK_CFG,
+ .mask = PLL_HCLK_RATIO_MASK,
+ .shift = PLL_HCLK_RATIO_SHIFT,
+};
+
+/* ahb clock */
+static struct clk ahb_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .recalc = &bus_clk_recalc,
+ .private_data = &ahb_config,
+};
+
+static struct clk_lookup ahb_cl = {
+ .con_id = "ahb_clk",
+ .clk = &ahb_clk,
+};
+
+/* uart configurations */
+static struct aux_clk_config uart_config = {
+ .synth_reg = UART_CLK_SYNT,
+};
+
+/* uart parents */
+static struct pclk_info uart_pclk_info[] = {
+ {
+ .pclk = &pll1_clk,
+ .pclk_mask = AUX_CLK_PLL1_MASK,
+ .scalable = 1,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_mask = AUX_CLK_PLL3_MASK,
+ .scalable = 0,
+ },
+};
+
+/* uart parent select structure */
+static struct pclk_sel uart_pclk_sel = {
+ .pclk_info = uart_pclk_info,
+ .pclk_count = ARRAY_SIZE(uart_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = UART_CLK_MASK,
+};
+
+/* uart clock */
+static struct clk uart_clk = {
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = UART_CLK_ENB,
+ .pclk_sel = &uart_pclk_sel,
+ .pclk_sel_shift = UART_CLK_SHIFT,
+ .recalc = &aux_clk_recalc,
+ .private_data = &uart_config,
+};
+
+static struct clk_lookup uart_cl = {
+ .dev_id = "uart",
+ .clk = &uart_clk,
+};
+
+/* firda configurations */
+static struct aux_clk_config firda_config = {
+ .synth_reg = FIRDA_CLK_SYNT,
+};
+
+/* firda parents */
+static struct pclk_info firda_pclk_info[] = {
+ {
+ .pclk = &pll1_clk,
+ .pclk_mask = AUX_CLK_PLL1_MASK,
+ .scalable = 1,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_mask = AUX_CLK_PLL3_MASK,
+ .scalable = 0,
+ },
+};
+
+/* firda parent select structure */
+static struct pclk_sel firda_pclk_sel = {
+ .pclk_info = firda_pclk_info,
+ .pclk_count = ARRAY_SIZE(firda_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = FIRDA_CLK_MASK,
+};
+
+/* firda clock */
+static struct clk firda_clk = {
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = FIRDA_CLK_ENB,
+ .pclk_sel = &firda_pclk_sel,
+ .pclk_sel_shift = FIRDA_CLK_SHIFT,
+ .recalc = &aux_clk_recalc,
+ .private_data = &firda_config,
+};
+
+static struct clk_lookup firda_cl = {
+ .dev_id = "firda",
+ .clk = &firda_clk,
+};
+
+/* gpt parents */
+static struct pclk_info gpt_pclk_info[] = {
+ {
+ .pclk = &pll1_clk,
+ .pclk_mask = AUX_CLK_PLL1_MASK,
+ .scalable = 1,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_mask = AUX_CLK_PLL3_MASK,
+ .scalable = 0,
+ },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt_pclk_sel = {
+ .pclk_info = gpt_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
+};
+
+/* gpt0 configurations */
+static struct aux_clk_config gpt0_config = {
+ .synth_reg = PRSC1_CLK_CFG,
+};
+
+/* gpt0 timer clock */
+static struct clk gpt0_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel_shift = GPT0_CLK_SHIFT,
+ .recalc = &gpt_clk_recalc,
+ .private_data = &gpt0_config,
+};
+
+static struct clk_lookup gpt0_cl = {
+ .dev_id = "gpt0",
+ .clk = &gpt0_clk,
+};
+
+/* gpt1 configurations */
+static struct aux_clk_config gpt1_config = {
+ .synth_reg = PRSC2_CLK_CFG,
+};
+
+/* gpt1 timer clock */
+static struct clk gpt1_clk = {
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = GPT1_CLK_ENB,
+ .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel_shift = GPT1_CLK_SHIFT,
+ .recalc = &gpt_clk_recalc,
+ .private_data = &gpt1_config,
+};
+
+static struct clk_lookup gpt1_cl = {
+ .dev_id = "gpt1",
+ .clk = &gpt1_clk,
+};
+
+/* gpt2 configurations */
+static struct aux_clk_config gpt2_config = {
+ .synth_reg = PRSC3_CLK_CFG,
+};
+
+/* gpt2 timer clock */
+static struct clk gpt2_clk = {
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = GPT2_CLK_ENB,
+ .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel_shift = GPT2_CLK_SHIFT,
+ .recalc = &gpt_clk_recalc,
+ .private_data = &gpt2_config,
+};
+
+static struct clk_lookup gpt2_cl = {
+ .dev_id = "gpt2",
+ .clk = &gpt2_clk,
+};
+
+/* clock derived from pll3 clk */
+/* usbh clock */
+static struct clk usbh_clk = {
+ .pclk = &pll3_48m_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = USBH_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup usbh_cl = {
+ .dev_id = "usbh",
+ .clk = &usbh_clk,
+};
+
+/* usbd clock */
+static struct clk usbd_clk = {
+ .pclk = &pll3_48m_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = USBD_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup usbd_cl = {
+ .dev_id = "usbd",
+ .clk = &usbd_clk,
+};
+
+/* clcd clock */
+static struct clk clcd_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll3_48m_clk,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup clcd_cl = {
+ .dev_id = "clcd",
+ .clk = &clcd_clk,
+};
+
+/* clock derived from ahb clk */
+/* apb configuration structure */
+static struct bus_clk_config apb_config = {
+ .reg = CORE_CLK_CFG,
+ .mask = HCLK_PCLK_RATIO_MASK,
+ .shift = HCLK_PCLK_RATIO_SHIFT,
+};
+
+/* apb clock */
+static struct clk apb_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &ahb_clk,
+ .recalc = &bus_clk_recalc,
+ .private_data = &apb_config,
+};
+
+static struct clk_lookup apb_cl = {
+ .con_id = "apb_clk",
+ .clk = &apb_clk,
+};
+
+/* i2c clock */
+static struct clk i2c_clk = {
+ .pclk = &ahb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = I2C_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup i2c_cl = {
+ .dev_id = "i2c",
+ .clk = &i2c_clk,
+};
+
+/* dma clock */
+static struct clk dma_clk = {
+ .pclk = &ahb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = DMA_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup dma_cl = {
+ .dev_id = "dma",
+ .clk = &dma_clk,
+};
+
+/* jpeg clock */
+static struct clk jpeg_clk = {
+ .pclk = &ahb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = JPEG_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup jpeg_cl = {
+ .dev_id = "jpeg",
+ .clk = &jpeg_clk,
+};
+
+/* gmac clock */
+static struct clk gmac_clk = {
+ .pclk = &ahb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = GMAC_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup gmac_cl = {
+ .dev_id = "gmac",
+ .clk = &gmac_clk,
+};
+
+/* smi clock */
+static struct clk smi_clk = {
+ .pclk = &ahb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = SMI_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup smi_cl = {
+ .dev_id = "smi",
+ .clk = &smi_clk,
+};
+
+/* c3 clock */
+static struct clk c3_clk = {
+ .pclk = &ahb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = C3_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup c3_cl = {
+ .dev_id = "c3",
+ .clk = &c3_clk,
+};
+
+/* clock derived from apb clk */
+/* adc clock */
+static struct clk adc_clk = {
+ .pclk = &apb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = ADC_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup adc_cl = {
+ .dev_id = "adc",
+ .clk = &adc_clk,
+};
+
+/* ssp clock */
+static struct clk ssp_clk = {
+ .pclk = &apb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = SSP_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup ssp_cl = {
+ .dev_id = "ssp",
+ .clk = &ssp_clk,
+};
+
+/* gpio clock */
+static struct clk gpio_clk = {
+ .pclk = &apb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = GPIO_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup gpio_cl = {
+ .dev_id = "gpio",
+ .clk = &gpio_clk,
+};
+
+/* array of all spear 3xx clock lookups */
+static struct clk_lookup *spear_clk_lookups[] = {
+ /* root clks */
+ &osc_32k_cl,
+ &osc_24m_cl,
+
+ /* clock derived from 32 KHz osc clk */
+ &rtc_cl,
+
+ /* clock derived from 24 MHz osc clk */
+ &pll1_cl,
+ &pll3_48m_cl,
+ &wdt_cl,
+
+ /* clock derived from pll1 clk */
+ &cpu_cl,
+ &ahb_cl,
+ &uart_cl,
+ &firda_cl,
+ &gpt0_cl,
+ &gpt1_cl,
+ &gpt2_cl,
+
+ /* clock derived from pll3 clk */
+ &usbh_cl,
+ &usbd_cl,
+ &clcd_cl,
+
+ /* clock derived from ahb clk */
+ &apb_cl,
+ &i2c_cl,
+ &dma_cl,
+ &jpeg_cl,
+ &gmac_cl,
+ &smi_cl,
+ &c3_cl,
+
+ /* clock derived from apb clk */
+ &adc_cl,
+ &ssp_cl,
+ &gpio_cl,
+};
+
+void __init clk_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+ clk_register(spear_clk_lookups[i]);
+
+ recalc_root_clocks();
+}
diff --git a/arch/arm/mach-spear3xx/include/mach/clkdev.h b/arch/arm/mach-spear3xx/include/mach/clkdev.h
new file mode 100644
index 0000000..04b168b
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/clkdev.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/clkdev.h
+ *
+ * Clock Dev framework definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar at st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#include <plat/clkdev.h>
+
+#endif /* __ASM_MACH_CLKDEV_H */
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
new file mode 100755
index 0000000..c33b847
--- /dev/null
+++ b/arch/arm/mach-spear6xx/clock.c
@@ -0,0 +1,656 @@
+/*
+ * arch/arm/mach-spear6xx/clock.c
+ *
+ * SPEAr6xx machines clock framework source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar at st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <mach/misc_regs.h>
+#include <plat/clock.h>
+
+/* root clks */
+/* 32 KHz oscillator clock */
+static struct clk osc_32k_clk = {
+ .flags = ALWAYS_ENABLED,
+ .rate = 32 * KHZ,
+};
+
+static struct clk_lookup osc_32k_cl = {
+ .con_id = "osc_32k_clk",
+ .clk = &osc_32k_clk,
+};
+
+/* 30 MHz oscillator clock */
+static struct clk osc_30m_clk = {
+ .flags = ALWAYS_ENABLED,
+ .rate = 30 * MHZ,
+};
+
+static struct clk_lookup osc_30m_cl = {
+ .con_id = "osc_30m_clk",
+ .clk = &osc_30m_clk,
+};
+
+/* clock derived from 32 KHz osc clk */
+/* rtc clock */
+static struct clk rtc_clk = {
+ .pclk = &osc_32k_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = RTC_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup rtc_cl = {
+ .dev_id = "rtc",
+ .clk = &rtc_clk,
+};
+
+/* clock derived from 30 MHz osc clk */
+/* pll1 configuration structure */
+static struct pll_clk_config pll1_config = {
+ .mode_reg = PLL1_CTR,
+ .cfg_reg = PLL1_FRQ,
+};
+
+/* PLL1 clock */
+static struct clk pll1_clk = {
+ .pclk = &osc_30m_clk,
+ .en_reg = PLL1_CTR,
+ .en_reg_bit = PLL_ENABLE,
+ .recalc = &pll1_clk_recalc,
+ .private_data = &pll1_config,
+};
+
+static struct clk_lookup pll1_cl = {
+ .con_id = "pll1_clk",
+ .clk = &pll1_clk,
+};
+
+/* PLL3 48 MHz clock */
+static struct clk pll3_48m_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &osc_30m_clk,
+ .rate = 48 * MHZ,
+};
+
+static struct clk_lookup pll3_48m_cl = {
+ .con_id = "pll3_48m_clk",
+ .clk = &pll3_48m_clk,
+};
+
+/* watch dog timer clock */
+static struct clk wdt_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &osc_30m_clk,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup wdt_cl = {
+ .dev_id = "wdt",
+ .clk = &wdt_clk,
+};
+
+/* clock derived from pll1 clk */
+/* cpu clock */
+static struct clk cpu_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup cpu_cl = {
+ .con_id = "cpu_clk",
+ .clk = &cpu_clk,
+};
+
+/* ahb configuration structure */
+static struct bus_clk_config ahb_config = {
+ .reg = CORE_CLK_CFG,
+ .mask = PLL_HCLK_RATIO_MASK,
+ .shift = PLL_HCLK_RATIO_SHIFT,
+};
+
+/* ahb clock */
+static struct clk ahb_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .recalc = &bus_clk_recalc,
+ .private_data = &ahb_config,
+};
+
+static struct clk_lookup ahb_cl = {
+ .con_id = "ahb_clk",
+ .clk = &ahb_clk,
+};
+
+/* uart parents */
+static struct pclk_info uart_pclk_info[] = {
+ {
+ .pclk = &pll1_clk,
+ .pclk_mask = AUX_CLK_PLL1_MASK,
+ .scalable = 1,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_mask = AUX_CLK_PLL3_MASK,
+ .scalable = 0,
+ },
+};
+
+/* uart parent select structure */
+static struct pclk_sel uart_pclk_sel = {
+ .pclk_info = uart_pclk_info,
+ .pclk_count = ARRAY_SIZE(uart_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = UART_CLK_MASK,
+};
+
+/* uart configurations */
+static struct aux_clk_config uart_config = {
+ .synth_reg = UART_CLK_SYNT,
+};
+
+/* uart0 clock */
+static struct clk uart0_clk = {
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = UART0_CLK_ENB,
+ .pclk_sel = &uart_pclk_sel,
+ .pclk_sel_shift = UART_CLK_SHIFT,
+ .recalc = &aux_clk_recalc,
+ .private_data = &uart_config,
+};
+
+static struct clk_lookup uart0_cl = {
+ .dev_id = "uart0",
+ .clk = &uart0_clk,
+};
+
+/* uart1 clock */
+static struct clk uart1_clk = {
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = UART1_CLK_ENB,
+ .pclk_sel = &uart_pclk_sel,
+ .pclk_sel_shift = UART_CLK_SHIFT,
+ .recalc = &aux_clk_recalc,
+ .private_data = &uart_config,
+};
+
+static struct clk_lookup uart1_cl = {
+ .dev_id = "uart1",
+ .clk = &uart1_clk,
+};
+
+/* firda configurations */
+static struct aux_clk_config firda_config = {
+ .synth_reg = FIRDA_CLK_SYNT,
+};
+
+/* firda parents */
+static struct pclk_info firda_pclk_info[] = {
+ {
+ .pclk = &pll1_clk,
+ .pclk_mask = AUX_CLK_PLL1_MASK,
+ .scalable = 1,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_mask = AUX_CLK_PLL3_MASK,
+ .scalable = 0,
+ },
+};
+
+/* firda parent select structure */
+static struct pclk_sel firda_pclk_sel = {
+ .pclk_info = firda_pclk_info,
+ .pclk_count = ARRAY_SIZE(firda_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = FIRDA_CLK_MASK,
+};
+
+/* firda clock */
+static struct clk firda_clk = {
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = FIRDA_CLK_ENB,
+ .pclk_sel = &firda_pclk_sel,
+ .pclk_sel_shift = FIRDA_CLK_SHIFT,
+ .recalc = &aux_clk_recalc,
+ .private_data = &firda_config,
+};
+
+static struct clk_lookup firda_cl = {
+ .dev_id = "firda",
+ .clk = &firda_clk,
+};
+
+/* clcd configurations */
+static struct aux_clk_config clcd_config = {
+ .synth_reg = CLCD_CLK_SYNT,
+};
+
+/* clcd parents */
+static struct pclk_info clcd_pclk_info[] = {
+ {
+ .pclk = &pll1_clk,
+ .pclk_mask = AUX_CLK_PLL1_MASK,
+ .scalable = 1,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_mask = AUX_CLK_PLL3_MASK,
+ .scalable = 0,
+ },
+};
+
+/* clcd parent select structure */
+static struct pclk_sel clcd_pclk_sel = {
+ .pclk_info = clcd_pclk_info,
+ .pclk_count = ARRAY_SIZE(clcd_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = CLCD_CLK_MASK,
+};
+
+/* clcd clock */
+static struct clk clcd_clk = {
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = CLCD_CLK_ENB,
+ .pclk_sel = &clcd_pclk_sel,
+ .pclk_sel_shift = CLCD_CLK_SHIFT,
+ .recalc = &aux_clk_recalc,
+ .private_data = &clcd_config,
+};
+
+static struct clk_lookup clcd_cl = {
+ .dev_id = "clcd",
+ .clk = &clcd_clk,
+};
+
+/* gpt parents */
+static struct pclk_info gpt_pclk_info[] = {
+ {
+ .pclk = &pll1_clk,
+ .pclk_mask = AUX_CLK_PLL1_MASK,
+ .scalable = 1,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_mask = AUX_CLK_PLL3_MASK,
+ .scalable = 0,
+ },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt_pclk_sel = {
+ .pclk_info = gpt_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
+};
+
+/* gpt0_1 configurations */
+static struct aux_clk_config gpt0_1_config = {
+ .synth_reg = PRSC1_CLK_CFG,
+};
+
+/* gpt0 ARM1 subsystem timer clock */
+static struct clk gpt0_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel_shift = GPT0_CLK_SHIFT,
+ .recalc = &gpt_clk_recalc,
+ .private_data = &gpt0_1_config,
+};
+
+static struct clk_lookup gpt0_cl = {
+ .dev_id = "gpt0",
+ .clk = &gpt0_clk,
+};
+
+/* gpt1 timer clock */
+static struct clk gpt1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel_shift = GPT1_CLK_SHIFT,
+ .recalc = &gpt_clk_recalc,
+ .private_data = &gpt0_1_config,
+};
+
+static struct clk_lookup gpt1_cl = {
+ .dev_id = "gpt1",
+ .clk = &gpt1_clk,
+};
+
+/* gpt2 configurations */
+static struct aux_clk_config gpt2_config = {
+ .synth_reg = PRSC2_CLK_CFG,
+};
+
+/* gpt2 timer clock */
+static struct clk gpt2_clk = {
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = GPT2_CLK_ENB,
+ .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel_shift = GPT2_CLK_SHIFT,
+ .recalc = &gpt_clk_recalc,
+ .private_data = &gpt2_config,
+};
+
+static struct clk_lookup gpt2_cl = {
+ .dev_id = "gpt2",
+ .clk = &gpt2_clk,
+};
+
+/* gpt3 configurations */
+static struct aux_clk_config gpt3_config = {
+ .synth_reg = PRSC3_CLK_CFG,
+};
+
+/* gpt3 timer clock */
+static struct clk gpt3_clk = {
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = GPT3_CLK_ENB,
+ .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel_shift = GPT3_CLK_SHIFT,
+ .recalc = &gpt_clk_recalc,
+ .private_data = &gpt3_config,
+};
+
+static struct clk_lookup gpt3_cl = {
+ .dev_id = "gpt3",
+ .clk = &gpt3_clk,
+};
+
+/* clock derived from pll3 clk */
+/* usbh0 clock */
+static struct clk usbh0_clk = {
+ .pclk = &pll3_48m_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = USBH0_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup usbh0_cl = {
+ .dev_id = "usbh0",
+ .clk = &usbh0_clk,
+};
+
+/* usbh1 clock */
+static struct clk usbh1_clk = {
+ .pclk = &pll3_48m_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = USBH1_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup usbh1_cl = {
+ .dev_id = "usbh1",
+ .clk = &usbh1_clk,
+};
+
+/* usbd clock */
+static struct clk usbd_clk = {
+ .pclk = &pll3_48m_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = USBD_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup usbd_cl = {
+ .dev_id = "usbd",
+ .clk = &usbd_clk,
+};
+
+/* clock derived from ahb clk */
+/* apb configuration structure */
+static struct bus_clk_config apb_config = {
+ .reg = CORE_CLK_CFG,
+ .mask = HCLK_PCLK_RATIO_MASK,
+ .shift = HCLK_PCLK_RATIO_SHIFT,
+};
+
+/* apb clock */
+static struct clk apb_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &ahb_clk,
+ .recalc = &bus_clk_recalc,
+ .private_data = &apb_config,
+};
+
+static struct clk_lookup apb_cl = {
+ .con_id = "apb_clk",
+ .clk = &apb_clk,
+};
+
+/* i2c clock */
+static struct clk i2c_clk = {
+ .pclk = &ahb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = I2C_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup i2c_cl = {
+ .dev_id = "i2c",
+ .clk = &i2c_clk,
+};
+
+/* dma clock */
+static struct clk dma_clk = {
+ .pclk = &ahb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = DMA_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup dma_cl = {
+ .dev_id = "dma",
+ .clk = &dma_clk,
+};
+
+/* jpeg clock */
+static struct clk jpeg_clk = {
+ .pclk = &ahb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = JPEG_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup jpeg_cl = {
+ .dev_id = "jpeg",
+ .clk = &jpeg_clk,
+};
+
+/* gmac clock */
+static struct clk gmac_clk = {
+ .pclk = &ahb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = GMAC_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup gmac_cl = {
+ .dev_id = "gmac",
+ .clk = &gmac_clk,
+};
+
+/* smi clock */
+static struct clk smi_clk = {
+ .pclk = &ahb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = SMI_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup smi_cl = {
+ .dev_id = "smi",
+ .clk = &smi_clk,
+};
+
+/* fsmc clock */
+static struct clk fsmc_clk = {
+ .pclk = &ahb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = FSMC_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup fsmc_cl = {
+ .dev_id = "fsmc",
+ .clk = &fsmc_clk,
+};
+
+/* clock derived from apb clk */
+/* adc clock */
+static struct clk adc_clk = {
+ .pclk = &apb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = ADC_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup adc_cl = {
+ .dev_id = "adc",
+ .clk = &adc_clk,
+};
+
+/* ssp0 clock */
+static struct clk ssp0_clk = {
+ .pclk = &apb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = SSP0_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup ssp0_cl = {
+ .dev_id = "ssp0",
+ .clk = &ssp0_clk,
+};
+
+/* ssp1 clock */
+static struct clk ssp1_clk = {
+ .pclk = &apb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = SSP1_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup ssp1_cl = {
+ .dev_id = "ssp1",
+ .clk = &ssp1_clk,
+};
+
+/* ssp2 clock */
+static struct clk ssp2_clk = {
+ .pclk = &apb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = SSP2_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup ssp2_cl = {
+ .dev_id = "ssp2",
+ .clk = &ssp2_clk,
+};
+
+/* gpio0 ARM subsystem clock */
+static struct clk gpio0_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup gpio0_cl = {
+ .dev_id = "gpio0",
+ .clk = &gpio0_clk,
+};
+
+/* gpio1 clock */
+static struct clk gpio1_clk = {
+ .pclk = &apb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = GPIO1_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup gpio1_cl = {
+ .dev_id = "gpio1",
+ .clk = &gpio1_clk,
+};
+
+/* gpio2 clock */
+static struct clk gpio2_clk = {
+ .pclk = &apb_clk,
+ .en_reg = PERIP1_CLK_ENB,
+ .en_reg_bit = GPIO2_CLK_ENB,
+ .recalc = &follow_parent,
+};
+
+static struct clk_lookup gpio2_cl = {
+ .dev_id = "gpio2",
+ .clk = &gpio2_clk,
+};
+
+/* array of all spear 6xx clock lookups */
+static struct clk_lookup *spear_clk_lookups[] = {
+ /* root clks */
+ &osc_32k_cl,
+ &osc_30m_cl,
+
+ /* clock derived from 32 KHz osc clk */
+ &rtc_cl,
+
+ /* clock derived from 30 MHz osc clk */
+ &pll1_cl,
+ &pll3_48m_cl,
+ &wdt_cl,
+
+ /* clock derived from pll1 clk */
+ &cpu_cl,
+ &ahb_cl,
+ &uart0_cl,
+ &uart1_cl,
+ &firda_cl,
+ &clcd_cl,
+ &gpt0_cl,
+ &gpt1_cl,
+ &gpt2_cl,
+ &gpt3_cl,
+
+ /* clock derived from pll3 clk */
+ &usbh0_cl,
+ &usbh1_cl,
+ &usbd_cl,
+
+ /* clock derived from ahb clk */
+ &apb_cl,
+ &i2c_cl,
+ &dma_cl,
+ &jpeg_cl,
+ &gmac_cl,
+ &smi_cl,
+ &fsmc_cl,
+
+ /* clock derived from apb clk */
+ &adc_cl,
+ &ssp0_cl,
+ &ssp1_cl,
+ &ssp2_cl,
+ &gpio0_cl,
+ &gpio1_cl,
+ &gpio2_cl,
+};
+
+void __init clk_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+ clk_register(spear_clk_lookups[i]);
+
+ recalc_root_clocks();
+
+ return 0;
+}
diff --git a/arch/arm/mach-spear6xx/include/mach/clkdev.h b/arch/arm/mach-spear6xx/include/mach/clkdev.h
new file mode 100644
index 0000000..2fb7dbc
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/clkdev.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/clkdev.h
+ *
+ * Clock Dev framework definitions for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar at st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#include <plat/clkdev.h>
+
+#endif /* __ASM_MACH_CLKDEV_H */
diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c
new file mode 100755
index 0000000..bdcae0c
--- /dev/null
+++ b/arch/arm/plat-spear/clock.c
@@ -0,0 +1,433 @@
+/*
+ * arch/arm/plat-spear/clock.c
+ *
+ * Clock framework for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar at st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <mach/misc_regs.h>
+#include <plat/clock.h>
+
+static DEFINE_SPINLOCK(clocks_lock);
+static LIST_HEAD(root_clks);
+
+static void propagate_rate(struct list_head *);
+
+static int generic_clk_enable(struct clk *clk)
+{
+ unsigned int val;
+
+ if (!clk->en_reg)
+ return -EFAULT;
+
+ val = readl(clk->en_reg);
+ if (unlikely(clk->flags & RESET_TO_ENABLE))
+ val &= ~(1 << clk->en_reg_bit);
+ else
+ val |= 1 << clk->en_reg_bit;
+
+ writel(val, clk->en_reg);
+
+ return 0;
+}
+
+static void generic_clk_disable(struct clk *clk)
+{
+ unsigned int val;
+
+ if (!clk->en_reg)
+ return;
+
+ val = readl(clk->en_reg);
+ if (unlikely(clk->flags & RESET_TO_ENABLE))
+ val |= 1 << clk->en_reg_bit;
+ else
+ val &= ~(1 << clk->en_reg_bit);
+
+ writel(val, clk->en_reg);
+}
+
+/* generic clk ops */
+static struct clkops generic_clkops = {
+ .enable = generic_clk_enable,
+ .disable = generic_clk_disable,
+};
+
+/*
+ * clk_enable - inform the system when the clock source should be running.
+ * @clk: clock source
+ *
+ * If the clock can not be enabled/disabled, this should return success.
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+ int ret = 0;
+
+ if (!clk || IS_ERR(clk))
+ return -EFAULT;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (clk->usage_count++ == 0) {
+ if (clk->ops && clk->ops->enable)
+ ret = clk->ops->enable(clk);
+ }
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+/*
+ * clk_disable - inform the system when the clock source is no longer required.
+ * @clk: clock source
+ *
+ * Inform the system that a clock source is no longer required by
+ * a driver and may be shut down.
+ *
+ * Implementation detail: if the clock source is shared between
+ * multiple drivers, clk_enable() calls must be balanced by the
+ * same number of clk_disable() calls for the clock source to be
+ * disabled.
+ */
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (!clk || IS_ERR(clk))
+ return;
+
+ WARN_ON(clk->usage_count == 0);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (--clk->usage_count == 0) {
+ if (clk->ops && clk->ops->disable)
+ clk->ops->disable(clk);
+ }
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+/**
+ * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
+ * This is only valid once the clock source has been enabled.
+ * @clk: clock source
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long flags, rate;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ rate = clk->rate;
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
+ return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/**
+ * clk_set_parent - set the parent clock source for this clock
+ * @clk: clock source
+ * @parent: parent clock source
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ int i, found = 0, val = 0;
+ unsigned long flags;
+
+ if (!clk || IS_ERR(clk) || !parent || IS_ERR(parent))
+ return -EFAULT;
+ if (clk->usage_count == 0)
+ return -EBUSY;
+ if (!clk->pclk_sel)
+ return -EPERM;
+ if (clk->pclk == parent)
+ return 0;
+
+ for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
+ if (clk->pclk_sel->pclk_info[i].pclk == parent) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (!found)
+ return -EPERM;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ /* reflect parent change in hardware */
+ val = readl(clk->pclk_sel->pclk_sel_reg);
+ val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift);
+ val |= clk->pclk_sel->pclk_info[i].pclk_mask << clk->pclk_sel_shift;
+ writel(val, clk->pclk_sel->pclk_sel_reg);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
+ /* reflect parent change in software */
+ clk->recalc(clk);
+ propagate_rate(&clk->children);
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+/* registers clock in platform clock framework */
+void clk_register(struct clk_lookup *cl)
+{
+ struct clk *clk = cl->clk;
+ unsigned long flags;
+
+ if (!clk || IS_ERR(clk))
+ return;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+
+ INIT_LIST_HEAD(&clk->children);
+ if (clk->flags & ALWAYS_ENABLED)
+ clk->ops = NULL;
+ else if (!clk->ops)
+ clk->ops = &generic_clkops;
+
+ /* root clock don't have any parents */
+ if (!clk->pclk && !clk->pclk_sel) {
+ list_add(&clk->sibling, &root_clks);
+ /* add clocks with only one parent to parent's children list */
+ } else if (clk->pclk && !clk->pclk_sel) {
+ list_add(&clk->sibling, &clk->pclk->children);
+ } else {
+ /* add clocks with > 1 parent to 1st parent's children list */
+ list_add(&clk->sibling,
+ &clk->pclk_sel->pclk_info[0].pclk->children);
+ }
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
+ /* add clock to arm clockdev framework */
+ clkdev_add(cl);
+}
+
+/**
+ * propagate_rate - recalculate and propagate all clocks in list head
+ *
+ * Recalculates all root clocks in list head, which if the clock's .recalc is
+ * set correctly, should also propagate their rates.
+ */
+static void propagate_rate(struct list_head *lhead)
+{
+ struct clk *clkp, *_temp;
+
+ list_for_each_entry_safe(clkp, _temp, lhead, sibling) {
+ if (clkp->recalc)
+ clkp->recalc(clkp);
+ propagate_rate(&clkp->children);
+ }
+}
+
+/* returns current programmed clocks clock info structure */
+static struct pclk_info *pclk_info_get(struct clk *clk)
+{
+ unsigned int mask, i;
+ unsigned long flags;
+ struct pclk_info *info;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ mask = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
+ & clk->pclk_sel->pclk_sel_mask;
+
+ for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
+ if (clk->pclk_sel->pclk_info[i].pclk_mask == mask)
+ info = &clk->pclk_sel->pclk_info[i];
+ }
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
+ return info;
+}
+
+/*
+ * Set pclk as cclk's parent and add clock sibling node to current parents
+ * children list
+ */
+static void change_parent(struct clk *cclk, struct clk *pclk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ list_del(&cclk->sibling);
+ list_add(&cclk->sibling, &pclk->children);
+
+ cclk->pclk = pclk;
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/*
+ * calculates current programmed rate of pll1
+ *
+ * In normal mode
+ * rate = (2 * M[15:8] * Fin)/(N * 2^P)
+ *
+ * In Dithered mode
+ * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
+ */
+void pll1_clk_recalc(struct clk *clk)
+{
+ struct pll_clk_config *config = clk->private_data;
+ unsigned int num = 2, den = 0, val, mode = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ mode = (readl(config->mode_reg) >> PLL_MODE_SHIFT) &
+ PLL_MODE_MASK;
+
+ val = readl(config->cfg_reg);
+ /* calculate denominator */
+ den = (val >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK;
+ den = 1 << den;
+ den *= (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK;
+
+ /* calculate numerator & denominator */
+ if (!mode) {
+ /* Normal mode */
+ num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK;
+ } else {
+ /* Dithered mode */
+ num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK;
+ den *= 256;
+ }
+
+ clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/* calculates current programmed rate of ahb or apb bus */
+void bus_clk_recalc(struct clk *clk)
+{
+ struct bus_clk_config *config = clk->private_data;
+ unsigned int div;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ div = ((readl(config->reg) >> config->shift) & config->mask) + 1;
+ clk->rate = (unsigned long)clk->pclk->rate / div;
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/*
+ * calculates current programmed rate of auxiliary synthesizers
+ * used by: UART, FIRDA
+ *
+ * Fout from synthesizer can be given from two equations:
+ * Fout1 = (Fin * X/Y)/2
+ * Fout2 = Fin * X/Y
+ *
+ * Selection of eqn 1 or 2 is programmed in register
+ */
+void aux_clk_recalc(struct clk *clk)
+{
+ struct aux_clk_config *config = clk->private_data;
+ struct pclk_info *pclk_info = NULL;
+ unsigned int num = 1, den = 1, val, eqn;
+ unsigned long flags;
+
+ /* get current programmed parent */
+ pclk_info = pclk_info_get(clk);
+ if (!pclk_info) {
+ spin_lock_irqsave(&clocks_lock, flags);
+ clk->pclk = NULL;
+ clk->rate = 0;
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ return;
+ }
+
+ change_parent(clk, pclk_info->pclk);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (pclk_info->scalable) {
+ val = readl(config->synth_reg);
+
+ eqn = (val >> AUX_EQ_SEL_SHIFT) & AUX_EQ_SEL_MASK;
+ if (eqn == AUX_EQ1_SEL)
+ den *= 2;
+
+ /* calculate numerator */
+ num = (val >> AUX_XSCALE_SHIFT) & AUX_XSCALE_MASK;
+
+ /* calculate denominator */
+ den *= (val >> AUX_YSCALE_SHIFT) & AUX_YSCALE_MASK;
+ val = (((clk->pclk->rate/10000) * num) / den) * 10000;
+ } else
+ val = clk->pclk->rate;
+
+ clk->rate = val;
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/*
+ * calculates current programmed rate of gpt synthesizers
+ * Fout from synthesizer can be given from below equations:
+ * Fout= Fin/((2 ^ (N+1)) * (M+1))
+ */
+void gpt_clk_recalc(struct clk *clk)
+{
+ struct aux_clk_config *config = clk->private_data;
+ struct pclk_info *pclk_info = NULL;
+ unsigned int div = 1, val;
+ unsigned long flags;
+
+ pclk_info = pclk_info_get(clk);
+ if (!pclk_info) {
+ spin_lock_irqsave(&clocks_lock, flags);
+ clk->pclk = NULL;
+ clk->rate = 0;
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ return;
+ }
+
+ change_parent(clk, pclk_info->pclk);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (pclk_info->scalable) {
+ val = readl(config->synth_reg);
+ div += (val >> GPT_MSCALE_SHIFT) & GPT_MSCALE_MASK;
+ div *= 1 << (((val >> GPT_NSCALE_SHIFT) & GPT_NSCALE_MASK) + 1);
+ }
+
+ clk->rate = (unsigned long)clk->pclk->rate / div;
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/*
+ * Used for clocks that always have same value as the parent clock divided by a
+ * fixed divisor
+ */
+void follow_parent(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ clk->rate = clk->pclk->rate;
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/**
+ * recalc_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ */
+void recalc_root_clocks(void)
+{
+ propagate_rate(&root_clks);
+}
diff --git a/arch/arm/plat-spear/include/plat/clkdev.h b/arch/arm/plat-spear/include/plat/clkdev.h
new file mode 100644
index 0000000..9b1cd54
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/clkdev.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-spear/include/plat/clkdev.h
+ *
+ * Clock Dev framework definitions for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar at st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_PLAT_CLKDEV_H
+#define __ASM_PLAT_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif /* __ASM_PLAT_CLKDEV_H */
diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h
new file mode 100755
index 0000000..c220274
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/clock.h
@@ -0,0 +1,130 @@
+/*
+ * arch/arm/plat-spear/include/plat/clock.h
+ *
+ * Clock framework definitions for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar at st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_PLAT_CLOCK_H
+#define __ASM_PLAT_CLOCK_H
+
+#include <linux/list.h>
+#include <asm/clkdev.h>
+#include <linux/types.h>
+
+/* clk values */
+#define KHZ (1000)
+#define MHZ (1000000)
+
+/* clk structure flags */
+#define ALWAYS_ENABLED (1 << 0) /* clock always enabled */
+#define RESET_TO_ENABLE (1 << 1) /* reset register bit to enable clk */
+
+/**
+ * struct clkops - clock operations
+ * @enable: pointer to clock enable function
+ * @disable: pointer to clock disable function
+ */
+struct clkops {
+ int (*enable) (struct clk *);
+ void (*disable) (struct clk *);
+};
+
+/**
+ * struct pclk_info - parents info
+ * @pclk: pointer to parent clk
+ * @pclk_mask: value to be written for selecting this parent
+ * @scalable: Is parent scalable (1 - YES, 0 - NO)
+ */
+struct pclk_info {
+ struct clk *pclk;
+ u8 pclk_mask;
+ u8 scalable;
+};
+
+/**
+ * struct pclk_sel - parents selection configuration
+ * @pclk_info: pointer to array of parent clock info
+ * @pclk_count: number of parents
+ * @pclk_sel_reg: register for selecting a parent
+ * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also)
+ */
+struct pclk_sel {
+ struct pclk_info *pclk_info;
+ u8 pclk_count;
+ unsigned int *pclk_sel_reg;
+ unsigned int pclk_sel_mask;
+};
+
+/**
+ * struct clk - clock structure
+ * @usage_count: num of users who enabled this clock
+ * @flags: flags for clock properties
+ * @rate: programmed clock rate in Hz
+ * @en_reg: clk enable/disable reg
+ * @en_reg_bit: clk enable/disable bit
+ * @ops: clk enable/disable ops - generic_clkops selected if NULL
+ * @recalc: pointer to clock rate recalculate function
+ * @pclk: current parent clk
+ * @pclk_sel: pointer to parent selection structure
+ * @pclk_sel_shift: register shift for selecting parent of this clock
+ * @children: list for childrens or this clock
+ * @sibling: node for list of clocks having same parents
+ * @private_data: clock specific private data
+ */
+struct clk {
+ unsigned int usage_count;
+ unsigned int flags;
+ unsigned long rate;
+ unsigned int *en_reg;
+ u8 en_reg_bit;
+ const struct clkops *ops;
+ void (*recalc) (struct clk *);
+
+ struct clk *pclk;
+ struct pclk_sel *pclk_sel;
+ unsigned int pclk_sel_shift;
+
+ struct list_head children;
+ struct list_head sibling;
+ void *private_data;
+};
+
+/* pll configuration structure */
+struct pll_clk_config {
+ unsigned int *mode_reg;
+ unsigned int *cfg_reg;
+};
+
+/* ahb and apb bus configuration structure */
+struct bus_clk_config {
+ unsigned int *reg;
+ unsigned int mask;
+ unsigned int shift;
+};
+
+/*
+ * Aux clk configuration structure: applicable to GPT, UART and FIRDA
+ */
+struct aux_clk_config {
+ unsigned int *synth_reg;
+};
+
+/* platform specific clock functions */
+void clk_register(struct clk_lookup *cl);
+void recalc_root_clocks(void);
+
+/* clock recalc functions */
+void follow_parent(struct clk *clk);
+void pll1_clk_recalc(struct clk *clk);
+void bus_clk_recalc(struct clk *clk);
+void gpt_clk_recalc(struct clk *clk);
+void aux_clk_recalc(struct clk *clk);
+
+#endif /* __ASM_PLAT_CLOCK_H */
--
1.6.0.2
More information about the linux-arm-kernel
mailing list