[PATCH 4/5] nomadik-gpio: convert to platform driver
Rabin Vincent
rabin.vincent at stericsson.com
Mon Mar 1 04:34:29 EST 2010
On the U8500 platform there are four GPIO blocks, each with a 4K address
space, including the peripheral identification. However, each of these
blocks have a varying number of banks, each of which have 32 GPIOs and
an interrupt line.
The current nomadik-gpio driver implementation can handle each of these
sub-banks easily with one instance each, but cannot as-is be hooked up
to them because it is an AMBA driver and it expects to see a peripheral
with the appropriate peripheral ids but having only one bank and only
one interrupt.
Solve this by converting the driver to a platform driver.
Acked-by: Alessandro Rubini <rubini at unipv.it>
Acked-by: Linus Walleij <linus.walleij at stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent at stericsson.com>
---
arch/arm/mach-nomadik/cpu-8815.c | 83 ++++++++++++++++------------
arch/arm/plat-nomadik/gpio.c | 74 +++++++++++++++-----------
arch/arm/plat-nomadik/include/plat/gpio.h | 1 -
3 files changed, 90 insertions(+), 68 deletions(-)
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 9bf33b3..91c3c90 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -20,6 +20,7 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
+#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
@@ -30,60 +31,66 @@
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
+#define __MEM_4K_RESOURCE(x) \
+ .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
/* The 8815 has 4 GPIO blocks, let's register them immediately */
+
+#define GPIO_RESOURCE(block) \
+ { \
+ .start = NOMADIK_GPIO##block##_BASE, \
+ .end = NOMADIK_GPIO##block##_BASE + SZ_4K - 1, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = IRQ_GPIO##block, \
+ .end = IRQ_GPIO##block, \
+ .flags = IORESOURCE_IRQ, \
+ }
+
+#define GPIO_DEVICE(block) \
+ { \
+ .name = "gpio", \
+ .id = block, \
+ .num_resources = 2, \
+ .resource = &cpu8815_gpio_resources[block * 2], \
+ .dev = { \
+ .platform_data = &cpu8815_gpio[block], \
+ }, \
+ }
+
static struct nmk_gpio_platform_data cpu8815_gpio[] = {
{
.name = "GPIO-0-31",
.first_gpio = 0,
.first_irq = NOMADIK_GPIO_TO_IRQ(0),
- .parent_irq = IRQ_GPIO0,
}, {
.name = "GPIO-32-63",
.first_gpio = 32,
.first_irq = NOMADIK_GPIO_TO_IRQ(32),
- .parent_irq = IRQ_GPIO1,
}, {
.name = "GPIO-64-95",
.first_gpio = 64,
.first_irq = NOMADIK_GPIO_TO_IRQ(64),
- .parent_irq = IRQ_GPIO2,
}, {
.name = "GPIO-96-127", /* 124..127 not routed to pin */
.first_gpio = 96,
.first_irq = NOMADIK_GPIO_TO_IRQ(96),
- .parent_irq = IRQ_GPIO3,
}
};
-#define __MEM_4K_RESOURCE(x) \
- .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+static struct resource cpu8815_gpio_resources[] = {
+ GPIO_RESOURCE(0),
+ GPIO_RESOURCE(1),
+ GPIO_RESOURCE(2),
+ GPIO_RESOURCE(3),
+};
-static struct amba_device cpu8815_amba_gpio[] = {
- {
- .dev = {
- .init_name = "gpio0",
- .platform_data = cpu8815_gpio + 0,
- },
- __MEM_4K_RESOURCE(NOMADIK_GPIO0_BASE),
- }, {
- .dev = {
- .init_name = "gpio1",
- .platform_data = cpu8815_gpio + 1,
- },
- __MEM_4K_RESOURCE(NOMADIK_GPIO1_BASE),
- }, {
- .dev = {
- .init_name = "gpio2",
- .platform_data = cpu8815_gpio + 2,
- },
- __MEM_4K_RESOURCE(NOMADIK_GPIO2_BASE),
- }, {
- .dev = {
- .init_name = "gpio3",
- .platform_data = cpu8815_gpio + 3,
- },
- __MEM_4K_RESOURCE(NOMADIK_GPIO3_BASE),
- },
+static struct platform_device cpu8815_platform_gpio[] = {
+ GPIO_DEVICE(0),
+ GPIO_DEVICE(1),
+ GPIO_DEVICE(2),
+ GPIO_DEVICE(3),
};
static struct amba_device cpu8815_amba_rng = {
@@ -93,11 +100,14 @@ static struct amba_device cpu8815_amba_rng = {
__MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
};
+static struct platform_device *platform_devs[] __initdata = {
+ cpu8815_platform_gpio + 0,
+ cpu8815_platform_gpio + 1,
+ cpu8815_platform_gpio + 2,
+ cpu8815_platform_gpio + 3,
+};
+
static struct amba_device *amba_devs[] __initdata = {
- cpu8815_amba_gpio + 0,
- cpu8815_amba_gpio + 1,
- cpu8815_amba_gpio + 2,
- cpu8815_amba_gpio + 3,
&cpu8815_amba_rng
};
@@ -105,6 +115,7 @@ static int __init cpu8815_init(void)
{
int i;
+ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
amba_device_register(amba_devs[i], &iomem_resource);
return 0;
diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c
index 4c3ea1a..092f380 100644
--- a/arch/arm/plat-nomadik/gpio.c
+++ b/arch/arm/plat-nomadik/gpio.c
@@ -13,7 +13,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
-#include <linux/amba/bus.h>
+#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/spinlock.h>
@@ -303,30 +303,48 @@ static struct gpio_chip nmk_gpio_template = {
.can_sleep = 0,
};
-static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id)
+static int __init nmk_gpio_probe(struct platform_device *dev)
{
- struct nmk_gpio_platform_data *pdata;
+ struct nmk_gpio_platform_data *pdata = dev->dev.platform_data;
struct nmk_gpio_chip *nmk_chip;
struct gpio_chip *chip;
+ struct resource *res;
+ int irq;
int ret;
- pdata = dev->dev.platform_data;
- ret = amba_request_regions(dev, pdata->name);
- if (ret)
- return ret;
+ if (!pdata)
+ return -ENODEV;
+
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENOENT;
+ goto out;
+ }
+
+ irq = platform_get_irq(dev, 0);
+ if (irq < 0) {
+ ret = irq;
+ goto out;
+ }
+
+ if (request_mem_region(res->start, resource_size(res),
+ dev_name(&dev->dev)) == NULL) {
+ ret = -EBUSY;
+ goto out;
+ }
nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
if (!nmk_chip) {
ret = -ENOMEM;
- goto out_amba;
+ goto out_release;
}
/*
* The virt address in nmk_chip->addr is in the nomadik register space,
* so we can simply convert the resource address, without remapping
*/
- nmk_chip->addr = io_p2v(dev->res.start);
+ nmk_chip->addr = io_p2v(res->start);
nmk_chip->chip = nmk_gpio_template;
- nmk_chip->parent_irq = pdata->parent_irq;
+ nmk_chip->parent_irq = irq;
spin_lock_init(&nmk_chip->lock);
chip = &nmk_chip->chip;
@@ -339,7 +357,7 @@ static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id)
if (ret)
goto out_free;
- amba_set_drvdata(dev, nmk_chip);
+ platform_set_drvdata(dev, nmk_chip);
nmk_gpio_init_irq(nmk_chip);
@@ -347,51 +365,45 @@ static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id)
nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
return 0;
- out_free:
+out_free:
kfree(nmk_chip);
- out_amba:
- amba_release_regions(dev);
+out_release:
+ release_mem_region(res->start, resource_size(res));
+out:
dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
pdata->first_gpio, pdata->first_gpio+31);
return ret;
}
-static int nmk_gpio_remove(struct amba_device *dev)
+static int __exit nmk_gpio_remove(struct platform_device *dev)
{
struct nmk_gpio_chip *nmk_chip;
+ struct resource *res;
+
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
- nmk_chip = amba_get_drvdata(dev);
+ nmk_chip = platform_get_drvdata(dev);
gpiochip_remove(&nmk_chip->chip);
kfree(nmk_chip);
- amba_release_regions(dev);
+ release_mem_region(res->start, resource_size(res));
return 0;
}
-/* We have 0x1f080060 and 0x1f180060, accept both using the mask */
-static struct amba_id nmk_gpio_ids[] = {
- {
- .id = 0x1f080060,
- .mask = 0xffefffff,
- },
- {0, 0},
-};
-
-static struct amba_driver nmk_gpio_driver = {
- .drv = {
+static struct platform_driver nmk_gpio_driver = {
+ .driver = {
.owner = THIS_MODULE,
.name = "gpio",
},
.probe = nmk_gpio_probe,
- .remove = nmk_gpio_remove,
+ .remove = __exit_p(nmk_gpio_remove),
.suspend = NULL, /* to be done */
.resume = NULL,
- .id_table = nmk_gpio_ids,
};
static int __init nmk_gpio_init(void)
{
- return amba_driver_register(&nmk_gpio_driver);
+ return platform_driver_register(&nmk_gpio_driver);
}
arch_initcall(nmk_gpio_init);
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h
index 1d665a0..4200811 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ b/arch/arm/plat-nomadik/include/plat/gpio.h
@@ -65,7 +65,6 @@ struct nmk_gpio_platform_data {
char *name;
int first_gpio;
int first_irq;
- int parent_irq;
};
#endif /* __ASM_PLAT_GPIO_H */
--
1.7.0
More information about the linux-arm-kernel
mailing list