[PATCH] Add support for Vista Silicon i.MX27 Visstrim_M10 board.
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Wed Jun 30 15:22:55 EDT 2010
Hello Javier,
On Wed, Jun 30, 2010 at 05:44:21PM +0200, Javier Martin wrote:
>
> Signed-off-by: Javier Martin <javier.martin at vista-silicon.com>
> ---
> arch/arm/mach-mx2/Kconfig | 8 +
> arch/arm/mach-mx2/Makefile | 1 +
> arch/arm/mach-mx2/mach-imx27_visstrim_m10.c | 279 ++++++++++++++++++++
> .../include/mach/board-imx27_visstrim_m10.h | 24 ++
> 4 files changed, 312 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-mx2/mach-imx27_visstrim_m10.c
> create mode 100644 arch/arm/plat-mxc/include/mach/board-imx27_visstrim_m10.h
>
> diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
> index 742fd4e..432eb78 100644
> --- a/arch/arm/mach-mx2/Kconfig
> +++ b/arch/arm/mach-mx2/Kconfig
> @@ -91,6 +91,14 @@ config MACH_MX27_3DS
> Include support for MX27PDK platform. This includes specific
> configurations for the board and its peripherals.
>
> +config MACH_IMX27_VISSTRIM_M10
> + bool "Vista Silicon i.MX27 Visstrim_m10"
> + depends on MACH_MX27
> + help
> + Include support for Visstrim_m10 platform and its different variants.
> + This includes specific configurations for the board and its
> + peripherals.
> +
> config MACH_IMX27LITE
> bool "LogicPD MX27 LITEKIT platform"
> depends on MACH_MX27
> diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
> index e3254fa..fbc54a9 100644
> --- a/arch/arm/mach-mx2/Makefile
> +++ b/arch/arm/mach-mx2/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
> obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
> obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
> obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
> +obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
> obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
> obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
> obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
> diff --git a/arch/arm/mach-mx2/mach-imx27_visstrim_m10.c b/arch/arm/mach-mx2/mach-imx27_visstrim_m10.c
> new file mode 100644
> index 0000000..1acd47a
> --- /dev/null
> +++ b/arch/arm/mach-mx2/mach-imx27_visstrim_m10.c
> @@ -0,0 +1,279 @@
> +/*
> + * mach-imx27_visstrim_m10.c
> + *
> + * Copyright 2010 Vista Silicon S.L.
> + * Javier Martin <javier.martin at vista-silicon.com>
> + *
> + * Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
This address is old, I suggest to just remove the last paragraph.
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/mtd/physmap.h>
> +#include <mach/common.h>
> +#include <asm/mach-types.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/time.h>
> +#include <mach/gpio.h>
> +#include <mach/mmc.h>
> +#include <mach/imx-uart.h>
> +#include <mach/iomux.h>
> +#include <mach/board-imx27_visstrim_m10.h>
> +#include <mach/mxc_ehci.h>
> +#include <mach/i2c.h>
> +#include <linux/i2c.h>
> +#include <linux/i2c/pca953x.h>
> +#include <linux/gpio_keys.h>
> +#include <linux/input.h>
As Baruch already pointed out, you need some adaptions after the latest
changes I did. Just ask if you have problems. (Hint, you have to
include devices-imx27.h and use the macros defined in that header. You
can make all pdata __initconst then.)
> +#include "devices.h"
> +
> +static int visstrim_m10_pins[] = {
> + /* UART1 (console) */
> + PE12_PF_UART1_TXD,
> + PE13_PF_UART1_RXD,
> + PE14_PF_UART1_CTS,
> + PE15_PF_UART1_RTS,
> + /* FEC */
> + PD0_AIN_FEC_TXD0,
> + PD1_AIN_FEC_TXD1,
> + PD2_AIN_FEC_TXD2,
> + PD3_AIN_FEC_TXD3,
> + PD4_AOUT_FEC_RX_ER,
> + PD5_AOUT_FEC_RXD1,
> + PD6_AOUT_FEC_RXD2,
> + PD7_AOUT_FEC_RXD3,
> + PD8_AF_FEC_MDIO,
> + PD9_AIN_FEC_MDC,
> + PD10_AOUT_FEC_CRS,
> + PD11_AOUT_FEC_TX_CLK,
> + PD12_AOUT_FEC_RXD0,
> + PD13_AOUT_FEC_RX_DV,
> + PD14_AOUT_FEC_RX_CLK,
> + PD15_AOUT_FEC_COL,
> + PD16_AIN_FEC_TX_ER,
> + PF23_AIN_FEC_TX_EN,
> + /* SDHC1 */
> + PE18_PF_SD1_D0,
> + PE19_PF_SD1_D1,
> + PE20_PF_SD1_D2,
> + PE21_PF_SD1_D3,
> + PE22_PF_SD1_CMD,
> + PE23_PF_SD1_CLK,
> + /* I2C1 */
> + PD17_PF_I2C_DATA,
> + PD18_PF_I2C_CLK,
> + /* USB OTG */
> + OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
> + PC9_PF_USBOTG_DATA0,
> + PC11_PF_USBOTG_DATA1,
> + PC10_PF_USBOTG_DATA2,
> + PC13_PF_USBOTG_DATA3,
> + PC12_PF_USBOTG_DATA4,
> + PC7_PF_USBOTG_DATA5,
> + PC8_PF_USBOTG_DATA6,
> + PE25_PF_USBOTG_DATA7,
> + PE24_PF_USBOTG_CLK,
> + PE2_PF_USBOTG_DIR,
> + PE0_PF_USBOTG_NXT,
> + PE1_PF_USBOTG_STP,
> + PB23_PF_USB_PWR,
> + PB24_PF_USB_OC,
> +};
> +
> +/* GPIOs used as events for applications */
> +static struct gpio_keys_button visstrim_gpio_keys[] = {
> + {
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .gpio = (GPIO_PORTC + 15),
> + .desc = "Default config",
> + .active_low = 0,
> + .wakeup = 1,
> + },
> + {
> + .type = EV_KEY,
> + .code = KEY_RECORD,
> + .gpio = (GPIO_PORTF + 14),
> + .desc = "Record",
> + .active_low = 0,
> + .wakeup = 1,
> + },
> + {
> + .type = EV_KEY,
> + .code = KEY_STOP,
> + .gpio = (GPIO_PORTF + 13),
> + .desc = "Stop",
> + .active_low = 0,
> + .wakeup = 1,
> + }
> +};
> +
> +static struct gpio_keys_platform_data visstrim_gpio_keys_platform_data = {
> + .buttons = visstrim_gpio_keys,
> + .nbuttons = ARRAY_SIZE(visstrim_gpio_keys),
> +};
> +
> +static struct platform_device visstrim_gpio_keys_device = {
> + .name = "gpio-keys",
> + .id = -1,
> + .dev = {
> + .platform_data = &visstrim_gpio_keys_platform_data,
> + },
> +};
> +
> +/* Visstrim_SM10 has a microSD slot connected to sdhc2*/
> +static int visstrim_m10_sdhc1_init(struct device *dev,
> + irq_handler_t detect_irq, void *data)
> +{
> + int ret;
> +
> + ret = request_irq(IRQ_GPIOB(25), detect_irq, IRQF_TRIGGER_FALLING,
> + "mmc-detect", data);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static void visstrim_m10_sdhc1_exit(struct device *dev, void *data)
> +{
> + free_irq(IRQ_GPIOB(25), data);
> +}
> +
> +static struct imxmmc_platform_data visstrim_m10_sdhc_pdata = {
> + .init = visstrim_m10_sdhc1_init,
> + .exit = visstrim_m10_sdhc1_exit,
> +};
> +
> +/* Visstrim_SM10 NOR flash */
> +static struct physmap_flash_data visstrim_m10_flash_data = {
> + .width = 2,
> +};
> +
> +static struct resource visstrim_m10_flash_resource = {
> + .start = 0xc0000000,
> + .end = 0xc0000000 + 0x04000000 - 1,
> + .flags = IORESOURCE_MEM,
> +
> +};
> +
> +static struct platform_device visstrim_m10_nor_mtd_device = {
> + .name = "physmap-flash",
> + .id = 0,
> + .dev = {
> + .platform_data = &visstrim_m10_flash_data,
> + },
> + .num_resources = 1,
> + .resource = &visstrim_m10_flash_resource,
> +};
> +
> +static struct platform_device *platform_devices[] __initdata = {
> + &visstrim_m10_nor_mtd_device,
> + &mxc_fec_device,
> +};
> +
> +/* Visstrim_M10 uses UART0 as console */
> +static struct imxuart_platform_data uart_pdata[] = {
> + {
> + .flags = IMXUART_HAVE_RTSCTS,
> + },
> +};
> +
> +/* Visstrim_M10 has several devices attached to I2C1 */
> +static struct imxi2c_platform_data visstrim_m10_i2c_1_data = {
> + .bitrate = 100000,
> +};
> +
> +static int visstrim_m10_pca9555_setup(struct i2c_client *client,
> + unsigned gpio_base, unsigned ngpio,
> + void *context)
> +{
> + int i;
> +
> + for (i = 0; i < ngpio; i++) {
> + gpio_request(gpio_base + i, "Visstrim_m10 GPIO Exp");
> + gpio_export(gpio_base + i, 1);
> + }
> + return 0;
> +}
> +
> +static struct pca953x_platform_data visstrim_m10_pca9555_pdata = {
> + .gpio_base = 240, /* After MX27 internal GPIOs */
> + .invert = 0,
> + .setup = visstrim_m10_pca9555_setup,
> +};
> +
> +static struct i2c_board_info visstrim_m10_i2c_devices[] = {
> + {
> + I2C_BOARD_INFO("pca9555", 0x20),
> + .platform_data = &visstrim_m10_pca9555_pdata,
> + },
> +};
> +
> +/* USB OTG */
> +static int otg_phy_init(struct platform_device *pdev)
> +{
> + gpio_set_value(OTG_PHY_CS_GPIO, 0);
> + return 0;
> +}
> +
> +static struct mxc_usbh_platform_data visstrim_m10_usbotg_pdata = {
> + .init = otg_phy_init,
> + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
> + .flags = MXC_EHCI_POWER_PINS_ENABLED,
> +};
> +
> +static void __init visstrim_m10_board_init(void)
> +{
> + int ret;
> +
> + ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
> + ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
> + if (ret)
> + printk(KERN_ERR "visstrim_m10: Failed tu setup pins (%d)\n",
> + ret);
> +
> + mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
> +
> + i2c_register_board_info(0, visstrim_m10_i2c_devices,
> + ARRAY_SIZE(visstrim_m10_i2c_devices));
> +
> + mxc_register_device(&mxc_i2c_device0, &visstrim_m10_i2c_1_data);
> + mxc_register_device(&mxc_sdhc_device0, &visstrim_m10_sdhc_pdata);
> + mxc_register_device(&mxc_otg_host, &visstrim_m10_usbotg_pdata);
> + platform_device_register(&visstrim_gpio_keys_device);
> + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
> +}
> +
> +static void __init visstrim_m10_timer_init(void)
> +{
> + mx27_clocks_init((unsigned long)25000000);
> +}
> +
> +static struct sys_timer visstrim_m10_timer = {
> + .init = visstrim_m10_timer_init,
> +};
> +
> +MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
> + .phys_io = MX27_AIPI_BASE_ADDR,
> + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
> + .boot_params = MX27_PHYS_OFFSET + 0x100,
> + .map_io = mx27_map_io,
> + .init_irq = mx27_init_irq,
> + .init_machine = visstrim_m10_board_init,
> + .timer = &visstrim_m10_timer,
> +MACHINE_END
> diff --git a/arch/arm/plat-mxc/include/mach/board-imx27_visstrim_m10.h b/arch/arm/plat-mxc/include/mach/board-imx27_visstrim_m10.h
> new file mode 100644
> index 0000000..9ef1531
> --- /dev/null
> +++ b/arch/arm/plat-mxc/include/mach/board-imx27_visstrim_m10.h
> @@ -0,0 +1,24 @@
> +/*
> + * Copyright (C) 2009 Javier Martin - javier.martin at vista-silicon.com
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
This is the correct address :-)
> + */
> +
> +#ifndef __ASM_ARCH_MXC_BOARD_IMX27_VISSTRIM_M10_H__
> +#define __ASM_ARCH_MXC_BOARD_IMX27_VISSTRIM_M10_H__
> +
> + #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
> +
> +#endif /* __ASM_ARCH_MXC_BOARD_IMX27_VISSTRIM_M10_H__ */
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
More information about the linux-arm-kernel
mailing list